Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758046AbcDHJ2p (ORCPT ); Fri, 8 Apr 2016 05:28:45 -0400 Received: from mail-pf0-f176.google.com ([209.85.192.176]:32968 "EHLO mail-pf0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753088AbcDHJ2j (ORCPT ); Fri, 8 Apr 2016 05:28:39 -0400 Date: Fri, 8 Apr 2016 17:28:32 +0800 From: Nicolas Boichat To: Enric Balletbo i Serra Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, treding@nvidia.com, robh+dt@kernel.org, djkurtz@chromium.org, dan.carpenter@oracle.com, Emil Velikov , Rob Herring Subject: Re: [PATCH v2 3/3] drm: bridge: anx78xx: Add anx78xx driver support. Message-ID: <20160408092831.GA18027@google.com> References: <1459354944-15326-1-git-send-email-enric.balletbo@collabora.com> <1459354944-15326-4-git-send-email-enric.balletbo@collabora.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1459354944-15326-4-git-send-email-enric.balletbo@collabora.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 65287 Lines: 2236 On Wed, Mar 30, 2016 at 06:22:24PM +0200, Enric Balletbo i Serra wrote: > Although there are other chips from the same family that can reuse this > driver, at the moment we only tested ANX7814 chip. > > The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter > designed for portable devices. This driver adds initial support for HDMI > to DP pass-through mode. > > Cc: Emil Velikov > Cc: Rob Herring > Cc: Dan Carpenter > Cc: Daniel Kurtz > Signed-off-by: Enric Balletbo i Serra Some minor nits below, otherwise: Tested-by: Nicolas Boichat Reviewed-by: Nicolas Boichat > --- > > Changes since v1: > - Dan Carpenter: > - Fix missing error code > - Use meaningful names for goto exit paths > - Rob Herring: > - Use hpd instead cable_det as is the more standard name. > - Daniel Kurtz: > - Use regmap_bulk in aux_transfer > - Fix gpio reset polarity. > - Turn off v10 last so we mirror poweron sequence > - Fix some error paths. > - Remove mutex in anx78xx_detect > - kbuild: > - WARNING: PTR_ERR_OR_ZERO can be used > > free any cached EDID on any plug event. > drivers/gpu/drm/bridge/Kconfig | 8 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/anx78xx.c | 1411 ++++++++++++++++++++++++++++++++++++++ > drivers/gpu/drm/bridge/anx78xx.h | 719 +++++++++++++++++++ > 4 files changed, 2139 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/anx78xx.c > create mode 100644 drivers/gpu/drm/bridge/anx78xx.h > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index 27e2022..0f595ae 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -40,4 +40,12 @@ config DRM_PARADE_PS8622 > ---help--- > Parade eDP-LVDS bridge chip driver. > > +config DRM_ANX78XX > + tristate "Analogix ANX78XX bridge" > + select DRM_KMS_HELPER > + select REGMAP_I2C > + ---help--- > + ANX78XX is a HD video transmitter chip over micro-USB connector > + for smartphone device. > + > endmenu > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index f13c33d..8f0d69e 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o > obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > +obj-$(CONFIG_DRM_ANX78XX) += anx78xx.o > diff --git a/drivers/gpu/drm/bridge/anx78xx.c b/drivers/gpu/drm/bridge/anx78xx.c > new file mode 100644 > index 0000000..995a2a7 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/anx78xx.c > @@ -0,0 +1,1411 @@ > +/* > + * Copyright(c) 2016, Analogix Semiconductor. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Based on anx7808 driver obtained from chromeos with copyright: > + * Copyright(c) 2013, Google Inc. > + * > + */ > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "anx78xx.h" > + > +#define I2C_NUM_ADDRESSES 5 > +#define I2C_IDX_TX_P0 0 > +#define I2C_IDX_TX_P1 1 > +#define I2C_IDX_TX_P2 2 > +#define I2C_IDX_RX_P0 3 > +#define I2C_IDX_RX_P1 4 > + > +#define XTAL_CLK 270 /* 27M */ > +#define AUX_CH_BUFFER_SIZE 16 > +#define AUX_WAIT_TIMEOUT_MS 15 > +#define AUX_WAIT_INTERVAL_MS 1 > + > +/* > + * _wait_for - magic (register) wait macro > + * > + * Does the right thing for modeset paths when run under kdgb or similar atomic > + * contexts. Note that it's important that we check the condition again after > + * having timed out, since the timeout could be due to preemption or similar and > + * we've never had a chance to check the condition before the timeout. > + */ > +#define _wait_for(COND, TO_MS, INTVL_MS) ({ \ > + unsigned long timeout__ = jiffies + msecs_to_jiffies(TO_MS) + 1;\ > + int ret__ = 0; \ > + while (!(COND)) { \ > + if (time_after(jiffies, timeout__)) { \ > + if (!(COND)) \ > + ret__ = -ETIMEDOUT; \ > + break; \ > + } \ > + if (drm_can_sleep()) { \ > + usleep_range(INTVL_MS * 1000, \ > + (INTVL_MS + 1) * 1000); \ > + } else { \ > + cpu_relax(); \ > + } \ > + } \ > + ret__; \ > +}) > + > +#define wait_for(COND, TO_MS, INTVL_MS) _wait_for(COND, TO_MS, INTVL_MS) Since you only use this once, I'd rather you put a loop in the code, rather than introducing this macro. > + > +static const u8 anx78xx_i2c_addresses[] = { > + [I2C_IDX_TX_P0] = TX_P0, > + [I2C_IDX_TX_P1] = TX_P1, > + [I2C_IDX_TX_P2] = TX_P2, > + [I2C_IDX_RX_P0] = RX_P0, > + [I2C_IDX_RX_P1] = RX_P1, > +}; > + > +struct anx78xx_platform_data { > + struct gpio_desc *gpiod_hpd; > + struct gpio_desc *gpiod_pd; > + struct gpio_desc *gpiod_reset; > + struct gpio_desc *gpiod_v10; > + > + int hpd_irq; > + int intp_irq; > +}; > + > +struct anx78xx { > + struct drm_dp_aux aux; > + struct drm_bridge bridge; > + struct i2c_client *client; > + struct edid *edid; > + struct drm_connector connector; > + struct drm_dp_link link; > + struct anx78xx_platform_data pdata; > + struct mutex lock; > + > + /* > + * I2C Slave addresses of ANX7814 are mapped as TX_P0, TX_P1, TX_P2, > + * RX_P0 and RX_P1. > + */ > + struct i2c_client *i2c_dummy[I2C_NUM_ADDRESSES]; > + struct regmap *map[I2C_NUM_ADDRESSES]; > + > + u16 chipid; > + u8 dpcd[DP_RECEIVER_CAP_SIZE]; > + > + bool powered; > +}; > + > +static int anx78xx_set_bits(struct regmap *map, u8 reg, u8 mask) > +{ > + return regmap_update_bits(map, reg, mask, mask); > +} > + > +static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask) > +{ > + return regmap_update_bits(map, reg, mask, 0); > +} > + > +static int anx78xx_aux_op_finished(struct anx78xx *anx78xx) > +{ > + int err; > + unsigned int aux_ctrl; > + > + err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG, > + &aux_ctrl); > + if (err) > + return err; > + > + if (aux_ctrl & SP_AUX_EN) > + return -EAGAIN; > + > + return 0; > +} > + > +static int anx78xx_aux_wait(struct anx78xx *anx78xx) > +{ > + int err; > + unsigned int status; > + > + err = wait_for(!anx78xx_aux_op_finished(anx78xx), AUX_WAIT_TIMEOUT_MS, > + AUX_WAIT_INTERVAL_MS); > + if (err) { > + DRM_ERROR("Timed out waiting AUX to finish\n"); > + return -ETIMEDOUT; > + } > + > + /* Read the AUX channel access status */ > + err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG, > + &status); > + if (err) > + return err; > + > + if (status & SP_AUX_STATUS) { > + DRM_ERROR("Failed to read AUX channel: 0x%02x\n", status); > + return -ETIMEDOUT; > + } > + > + return 0; > +} > + > +static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr) > +{ > + int err = 0; > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG, > + addr & 0xff); > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG, > + (addr & 0xff00) >> 8); > + > + /* > + * DP AUX CH Address Register #2, only update bits[3:0] > + * [7:4] RESERVED > + * [3:0] AUX_ADDR[19:16], Register control AUX CH address. > + */ > + err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_AUX_ADDR_19_16_REG, > + SP_AUX_ADDR_19_16_MASK, > + (addr & 0xf0000) >> 16); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux, > + struct drm_dp_aux_msg *msg) > +{ > + int err = 0; > + struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux); > + u8 ctrl1 = msg->request; > + u8 ctrl2 = SP_AUX_EN; > + u8 *buffer = msg->buffer; > + > + /* The DP AUX transmit and receive buffer has 16 bytes. */ > + if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE)) > + return -E2BIG; > + > + /* Zero-sized messages specify address-only transactions. */ > + if (msg->size < 1) > + ctrl2 |= SP_ADDR_ONLY; > + else /* For non-zero-sized set the length field. */ > + ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT; > + > + if ((msg->request & DP_AUX_I2C_READ) == 0) { > + /* When WRITE | MOT write values to data buffer */ > + err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_BUF_DATA0_REG, buffer, > + msg->size); > + if (err) > + return -EIO; > + } > + > + /* Write address and request */ > + err |= anx78xx_aux_address(anx78xx, msg->address); err = > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG, > + ctrl1); > + if (err) > + return -EIO; > + > + /* Start transaction */ > + err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0], err = > + SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY | > + SP_AUX_EN, ctrl2); > + if (err) > + return -EIO; return err; Do not replace the error code if it's readily available to you (many other instances below). > + > + err = anx78xx_aux_wait(anx78xx); > + > + msg->reply = err ? DP_AUX_I2C_REPLY_NACK : DP_AUX_I2C_REPLY_ACK; > + > + if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) { > + /* Read values from data buffer */ > + err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_BUF_DATA0_REG, buffer, > + msg->size); > + if (err) > + return -EIO; > + } > + > + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY); > + if (err) > + return -EIO; > + > + return msg->size; > +} > + > +static int anx78xx_set_hpd(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_TMDS_CTRL_BASE + 7, SP_PD_RT); > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG, > + SP_HPD_OUT); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static int anx78xx_clear_hpd(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG, > + SP_HPD_OUT); > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_TMDS_CTRL_BASE + 7, SP_PD_RT); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static const struct reg_sequence tmds_phy_initialization[] = { > + { SP_TMDS_CTRL_BASE + 1, 0x90 }, > + { SP_TMDS_CTRL_BASE + 2, 0xa9 }, > + { SP_TMDS_CTRL_BASE + 6, 0x92 }, > + { SP_TMDS_CTRL_BASE + 7, 0x80 }, > + { SP_TMDS_CTRL_BASE + 20, 0xf2 }, > + { SP_TMDS_CTRL_BASE + 22, 0xc4 }, > + { SP_TMDS_CTRL_BASE + 23, 0x18 }, > +}; > + > +static int anx78xx_rx_initialization(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG, > + SP_AUD_MUTE | SP_VID_MUTE); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_CHIP_CTRL_REG, > + SP_MAN_HDMI5V_DET | SP_PLLLOCK_CKDT_EN | > + SP_DIGITAL_CKDT_EN); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST | > + SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST); > + > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST | > + SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST); > + > + /* Sync detect change, GP set mute */ > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_AUD_EXCEPTION_ENABLE_BASE + 1, BIT(5) | > + BIT(6)); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_AUD_EXCEPTION_ENABLE_BASE + 3, > + SP_AEC_EN21); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_AUDVID_CTRL_REG, > + SP_AVC_EN | SP_AAC_OE | SP_AAC_EN); > + > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_SYSTEM_POWER_DOWN1_REG, SP_PWDN_CTRL); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], > + SP_VID_DATA_RANGE_CTRL_REG, SP_R2Y_INPUT_LIMIT); > + > + /* Enable DDC stretch */ > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_EXTRA_I2C_DEV_ADDR_REG, SP_I2C_EXTRA_ADDR); > + > + /* TMDS phy initialization */ > + err |= regmap_multi_reg_write(anx78xx->map[I2C_IDX_RX_P0], > + tmds_phy_initialization, > + ARRAY_SIZE(tmds_phy_initialization)); > + > + err |= anx78xx_clear_hpd(anx78xx); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static const u8 dp_tx_output_precise_tune_bits[20] = { > + 0x01, 0x03, 0x07, 0x7f, 0x71, 0x6b, 0x7f, > + 0x73, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00, > + 0x0c, 0x42, 0x1e, 0x3e, 0x72, 0x7e, > +}; > + > +static int anx78xx_link_phy_initialization(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + /* > + * REVISIT : It is writing to a RESERVED bits in Analog Control 0 > + * register. > + */ > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_ANALOG_CTRL0_REG, > + 0x02); > + > + /* > + * Write DP TX output emphasis precise tune bits. > + */ > + err |= regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P1], > + SP_DP_TX_LT_CTRL0_REG, > + dp_tx_output_precise_tune_bits, > + ARRAY_SIZE(dp_tx_output_precise_tune_bits)); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static int anx78xx_xtal_clk_sel(struct anx78xx *anx78xx) > +{ > + int err = 0; > + unsigned int regval; > + > + err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P2], > + SP_ANALOG_DEBUG2_REG, > + SP_XTAL_FRQ | SP_FORCE_SW_OFF_BYPASS, > + SP_XTAL_FRQ_27M); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL3_REG, > + XTAL_CLK & SP_WAIT_COUNTER_7_0_MASK); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL4_REG, > + ((XTAL_CLK & 0xff00) >> 2) | (XTAL_CLK / 10)); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_I2C_GEN_10US_TIMER0_REG, XTAL_CLK & 0xff); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_I2C_GEN_10US_TIMER1_REG, > + (XTAL_CLK & 0xff00) >> 8); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_MISC_CTRL_REG, > + XTAL_CLK / 10 - 1); > + > + err |= regmap_read(anx78xx->map[I2C_IDX_RX_P0], > + SP_HDMI_US_TIMER_CTRL_REG, > + ®val); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], > + SP_HDMI_US_TIMER_CTRL_REG, > + (regval & SP_MS_TIMER_MARGIN_10_8_MASK) | > + ((((XTAL_CLK / 10) >> 1) - 2) << 3)); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static const struct reg_sequence otp_key_protect[] = { > + { SP_OTP_KEY_PROTECT1_REG, SP_OTP_PSW1 }, > + { SP_OTP_KEY_PROTECT2_REG, SP_OTP_PSW2 }, > + { SP_OTP_KEY_PROTECT3_REG, SP_OTP_PSW3 }, > +}; > + > +static int anx78xx_tx_initialization(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + /* Set terminal resistor to 50 ohm */ > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG, > + 0x30); > + > + /* Enable aux double diff output */ > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_AUX_CH_CTRL2_REG, 0x08); > + > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_HDCP_CTRL_REG, SP_AUTO_EN | > + SP_AUTO_START); > + > + err |= regmap_multi_reg_write(anx78xx->map[I2C_IDX_TX_P0], > + otp_key_protect, > + ARRAY_SIZE(otp_key_protect)); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_HDCP_KEY_COMMAND_REG, SP_DISABLE_SYNC_HDCP); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL8_REG, > + SP_VID_VRES_TH); > + > + /* > + * DP HDCP auto authentication wait timer (when downstream starts to > + * auth, DP side will wait for this period then do auth automatically) > + */ > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_HDCP_AUTO_TIMER_REG, > + 0x00); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_HDCP_CTRL_REG, SP_LINK_POLLING); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_LINK_DEBUG_CTRL_REG, SP_M_VID_DEBUG); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], > + SP_ANALOG_DEBUG2_REG, SP_POWERON_TIME_1P5MS); > + > + err |= anx78xx_xtal_clk_sel(anx78xx); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_DEFER_CTRL_REG, > + SP_DEFER_CTRL_EN | 0x0c); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_POLLING_CTRL_REG, > + SP_AUTO_POLLING_DISABLE); > + > + /* > + * Short the link integrity check timer to speed up bstatus > + * polling for HDCP CTS item 1A-07 > + */ > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_HDCP_LINK_CHECK_TIMER_REG, 0x1d); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_MISC_CTRL_REG, SP_EQ_TRAINING_LOOP); > + > + /* Power down the main link by default */ > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD); > + > + err |= anx78xx_link_phy_initialization(anx78xx); > + > + /* Gen m_clk with downspreading */ > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_M_CALCULATION_CTRL_REG, SP_M_GEN_CLK_SEL); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static int anx78xx_enable_interrupts(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + /* > + * BIT0: INT pin assertion polarity: 1 = assert high > + * BIT1: INT pin output type: 0 = push/pull > + */ > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_INT_CTRL_REG, 0x01); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], > + SP_COMMON_INT_MASK4_REG, SP_HPD_LOST | SP_HPD_PLUG); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_MASK1_REG, > + SP_TRAINING_FINISH); > + > + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_MASK1_REG, > + SP_CKDT_CHG | SP_SCDT_CHG); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static void anx78xx_poweron(struct anx78xx *anx78xx) > +{ > + struct anx78xx_platform_data *pdata = &anx78xx->pdata; > + > + if (WARN_ON(anx78xx->powered)) > + return; > + > + if (pdata->gpiod_v10) { > + gpiod_set_value_cansleep(pdata->gpiod_v10, 1); > + usleep_range(1000, 2000); > + } > + > + gpiod_set_value_cansleep(pdata->gpiod_reset, 1); > + usleep_range(1000, 2000); > + > + gpiod_set_value_cansleep(pdata->gpiod_pd, 0); > + usleep_range(1000, 2000); > + > + gpiod_set_value_cansleep(pdata->gpiod_reset, 0); > + > + /* Power on registers module */ > + anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG, > + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD); > + anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG, > + SP_REGISTER_PD | SP_TOTAL_PD); > + > + anx78xx->powered = true; > +} > + > +static void anx78xx_poweroff(struct anx78xx *anx78xx) > +{ > + struct anx78xx_platform_data *pdata = &anx78xx->pdata; > + > + if (WARN_ON(!anx78xx->powered)) > + return; > + > + gpiod_set_value_cansleep(pdata->gpiod_reset, 1); > + usleep_range(1000, 2000); > + > + gpiod_set_value_cansleep(pdata->gpiod_pd, 1); > + usleep_range(1000, 2000); > + > + if (pdata->gpiod_v10) { > + gpiod_set_value_cansleep(pdata->gpiod_v10, 0); > + usleep_range(1000, 2000); > + } > + > + anx78xx->powered = false; > +} > + > +static int anx78xx_start(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + /* Power on all modules */ > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], > + SP_POWERDOWN_CTRL_REG, > + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | > + SP_LINK_PD); > + > + err |= anx78xx_enable_interrupts(anx78xx); > + err |= anx78xx_rx_initialization(anx78xx); > + err |= anx78xx_tx_initialization(anx78xx); > + > + if (err) { > + DRM_ERROR("Failed SlimPort transmitter initialization\n"); > + anx78xx_poweroff(anx78xx); > + return -EIO; > + } > + > + /* > + * This delay seems to help keep the hardware in a good state. Without > + * it, there are times where it fails silently. > + */ > + usleep_range(10000, 15000); > + > + return 0; > +} > + > +static int anx78xx_init_gpio(struct anx78xx *anx78xx) > +{ > + struct device *dev = &anx78xx->client->dev; > + struct anx78xx_platform_data *pdata = &anx78xx->pdata; > + > + /* GPIO for hpd */ > + pdata->gpiod_hpd = devm_gpiod_get(dev, "hpd", GPIOD_IN); > + if (IS_ERR(pdata->gpiod_hpd)) > + return PTR_ERR(pdata->gpiod_hpd); > + > + /* GPIO for chip power down */ > + pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH); > + if (IS_ERR(pdata->gpiod_pd)) > + return PTR_ERR(pdata->gpiod_pd); > + > + /* GPIO for chip reset */ > + pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(pdata->gpiod_reset)) > + return PTR_ERR(pdata->gpiod_reset); > + > + /* GPIO for V10 power control */ > + pdata->gpiod_v10 = devm_gpiod_get_optional(dev, "v10", GPIOD_OUT_LOW); > + > + return PTR_ERR_OR_ZERO(pdata->gpiod_v10); > +} > + > +static int anx78xx_dp_link_training(struct anx78xx *anx78xx) > +{ > + int err = 0; > + u8 dp_bw, regval; > + > + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG, > + 0x0); > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], > + SP_POWERDOWN_CTRL_REG, > + SP_TOTAL_PD); > + if (err) > + return -EIO; > + > + err = drm_dp_dpcd_readb(&anx78xx->aux, DP_MAX_LINK_RATE, &dp_bw); > + if (err < 0) > + return err; > + > + switch (dp_bw) { > + case DP_LINK_BW_1_62: > + case DP_LINK_BW_2_7: > + case DP_LINK_BW_5_4: > + break; > + default: > + DRM_DEBUG_KMS("Waiting to read DP bandwidth.\n"); > + return -EAGAIN; > + } > + > + err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG, > + SP_VIDEO_MUTE); > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], > + SP_VID_CTRL1_REG, SP_VIDEO_EN); > + if (err) > + return -EIO; > + > + /* Get dpcd info */ > + err = drm_dp_dpcd_read(&anx78xx->aux, DP_DPCD_REV, > + &anx78xx->dpcd, DP_RECEIVER_CAP_SIZE); > + if (err < 0) { > + DRM_ERROR("Failed to read DPCD\n"); > + return err; > + } > + > + /* Clear channel x SERDES power down */ > + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD); > + if (err) > + return -EIO; > + > + /* Check link capabilities */ > + err = drm_dp_link_probe(&anx78xx->aux, &anx78xx->link); > + if (err < 0) { > + DRM_ERROR("Failed to probe link capabilities\n"); > + return err; > + } > + > + /* Power up the sink */ > + err = drm_dp_link_power_up(&anx78xx->aux, &anx78xx->link); > + if (err < 0) { > + DRM_ERROR("Failed to power up DisplayPort link\n"); > + return err; > + } > + > + /* Possibly enable downspread on the sink */ > + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_DOWNSPREAD_CTRL1_REG, 0); > + if (err) > + return -EIO; > + > + if (anx78xx->dpcd[3] & 0x1) { > + DRM_DEBUG("Enable downspread on the sink\n"); > + /* 4000PPM */ > + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_DOWNSPREAD_CTRL1_REG, 8); > + if (err) > + return -EIO; > + > + err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL, > + DP_SPREAD_AMP_0_5); > + if (err < 0) > + return err; > + } else { > + err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL, 0); > + if (err < 0) > + return err; > + } > + > + /* Set the lane count and the link rate on the sink */ > + if (drm_dp_enhanced_frame_cap(anx78xx->dpcd)) > + err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_SYSTEM_CTRL_BASE + 4, > + SP_ENHANCED_MODE); > + else > + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_SYSTEM_CTRL_BASE + 4, > + SP_ENHANCED_MODE); > + if (err) > + return -EIO; > + > + regval = drm_dp_link_rate_to_bw_code(anx78xx->link.rate); > + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], > + SP_DP_MAIN_LINK_BW_SET_REG, regval); > + if (err) > + return -EIO; > + > + err = drm_dp_link_configure(&anx78xx->aux, &anx78xx->link); > + if (err < 0) { > + DRM_ERROR("Failed to configure DisplayPort link\n"); > + return err; > + } > + > + /* Start training on the source */ > + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_LT_CTRL_REG, > + SP_LT_EN); > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static int anx78xx_config_dp_output(struct anx78xx *anx78xx) > +{ > + int err = 0; > + > + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG, > + SP_VIDEO_MUTE); > + /* Enable DP output */ > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG, > + SP_VIDEO_EN); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static int anx78xx_send_video_infoframe(struct anx78xx *anx78xx, > + struct hdmi_avi_infoframe *frame) > +{ > + int err; > + u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE]; > + > + err = hdmi_avi_infoframe_pack(frame, buffer, sizeof(buffer)); > + if (err < 0) { > + DRM_ERROR("Failed to pack AVI infoframe: %d\n", err); > + return err; > + } > + > + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN); > + > + err |= regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P2], > + SP_INFOFRAME_AVI_DB1_REG, buffer, > + frame->length); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_UD); > + > + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0], > + SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN); > + > + if (err) > + return -EIO; > + > + return 0; > +} > + > +static inline struct anx78xx * > + connector_to_anx78xx(struct drm_connector *connector) > +{ > + return container_of(connector, struct anx78xx, connector); > +} > + > +static int anx78xx_get_downstream_info(struct anx78xx *anx78xx) > +{ > + int err; > + u8 regval; > + > + err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SINK_COUNT, ®val); > + if (err < 0) { > + DRM_ERROR("Get sink count failed %d\n", err); > + return err; > + } > + > + if (!DP_GET_SINK_COUNT(regval)) { > + DRM_ERROR("Downstream disconnected\n"); > + return -EIO; > + } > + > + return 0; > +} > + > +static int anx78xx_get_modes(struct drm_connector *connector) > +{ > + int err, num_modes = 0; > + struct anx78xx *anx78xx = connector_to_anx78xx(connector); > + > + if (WARN_ON(!anx78xx->powered)) > + return 0; > + > + if (anx78xx->edid) > + return drm_add_edid_modes(connector, anx78xx->edid); > + > + mutex_lock(&anx78xx->lock); > + > + err = anx78xx_get_downstream_info(anx78xx); > + if (err) { > + DRM_ERROR("Failed to get downstream info: %d\n", err); > + goto unlock; > + } > + > + anx78xx->edid = drm_get_edid(connector, &anx78xx->aux.ddc); > + if (!anx78xx->edid) { > + DRM_ERROR("Failed to read edid\n"); > + goto unlock; > + } > + > + err = drm_mode_connector_update_edid_property(connector, > + anx78xx->edid); > + if (err) { > + DRM_ERROR("Failed to update edid property\n"); > + goto unlock; > + } > + > + num_modes = drm_add_edid_modes(connector, anx78xx->edid); > + /* Store the ELD */ > + drm_edid_to_eld(connector, anx78xx->edid); > + > +unlock: > + mutex_unlock(&anx78xx->lock); > + > + return num_modes; > +} > + > +static struct drm_encoder *anx78xx_best_encoder(struct drm_connector *connector) > +{ > + struct anx78xx *anx78xx = connector_to_anx78xx(connector); > + > + return anx78xx->bridge.encoder; > +} > + > +static const struct drm_connector_helper_funcs > + anx78xx_connector_helper_funcs = { > + .get_modes = anx78xx_get_modes, > + .best_encoder = anx78xx_best_encoder, > +}; > + > +static enum drm_connector_status anx78xx_detect(struct drm_connector *connector, > + bool force) > +{ > + struct anx78xx *anx78xx = container_of(connector, struct anx78xx, > + connector); > + > + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, > + connector->name); > + > + if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd)) { > + DRM_DEBUG_KMS("CONNECTOR STATUS DISCONNECTED\n"); > + return connector_status_disconnected; > + } > + > + return connector_status_connected; > +} > + > +static void anx78xx_connector_destroy(struct drm_connector *connector) > +{ > + drm_connector_cleanup(connector); > +} > + > +static const struct drm_connector_funcs anx78xx_connector_funcs = { > + .dpms = drm_atomic_helper_connector_dpms, > + .fill_modes = drm_helper_probe_single_connector_modes, > + .detect = anx78xx_detect, > + .destroy = anx78xx_connector_destroy, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static inline struct anx78xx *bridge_to_anx78xx(struct drm_bridge *bridge) > +{ > + return container_of(bridge, struct anx78xx, bridge); > +} > + > +static int anx78xx_bridge_attach(struct drm_bridge *bridge) > +{ > + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge); > + int err; > + > + if (!bridge->encoder) { > + DRM_ERROR("Parent encoder object not found"); > + return -ENODEV; > + } > + > + /* Register aux channel */ > + anx78xx->aux.name = "DP-AUX"; > + anx78xx->aux.dev = &anx78xx->client->dev; > + anx78xx->aux.transfer = anx78xx_aux_transfer; > + > + err = drm_dp_aux_register(&anx78xx->aux); > + if (err < 0) { > + DRM_ERROR("Failed to register aux channel: %d\n", err); > + return err; > + } > + > + err = drm_connector_init(bridge->dev, &anx78xx->connector, > + &anx78xx_connector_funcs, > + DRM_MODE_CONNECTOR_DisplayPort); > + if (err) { > + DRM_ERROR("Failed to initialize connector: %d\n", err); > + return err; > + } > + > + drm_connector_helper_add(&anx78xx->connector, > + &anx78xx_connector_helper_funcs); > + > + err = drm_connector_register(&anx78xx->connector); > + if (err) { > + DRM_ERROR("Failed to register connector: %d\n", err); > + return err; > + } > + > + anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD; > + > + err = drm_mode_connector_attach_encoder(&anx78xx->connector, > + bridge->encoder); > + if (err) { > + DRM_ERROR("Failed to link up connector to encoder: %d\n", err); > + return err; > + } > + > + return 0; > +} > + > +static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge, > + const struct drm_display_mode *mode, > + struct drm_display_mode *adjusted_mode) > +{ > + if (mode->flags & DRM_MODE_FLAG_INTERLACE) > + return false; > + > + /* Max 1200p at 5.4 Ghz, one lane */ > + if (mode->clock > 154000) > + return false; This can be in a follow up patch, but we need to restrict resolutions according to the current bandwidth (e.g. 720p at 2.7Ghz). > + > + return true; > +} > + > +static void anx78xx_bridge_disable(struct drm_bridge *bridge) { > + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge); > + > + mutex_lock(&anx78xx->lock); > + > + /* Power off all modules except configuration registers access */ > + anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG, > + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD); > + > + mutex_unlock(&anx78xx->lock); > +} > + > +static void anx78xx_bridge_mode_set(struct drm_bridge *bridge, > + struct drm_display_mode *mode, > + struct drm_display_mode *adjusted_mode) > +{ > + int err; > + struct hdmi_avi_infoframe frame; > + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge); > + > + if (WARN_ON(!anx78xx->powered)) > + return; > + > + mutex_lock(&anx78xx->lock); > + > + mode = adjusted_mode; > + > + err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode); > + if (err) { > + DRM_ERROR("Failed to setup AVI infoframe: %d\n", err); > + goto unlock; > + } > + > + err = anx78xx_send_video_infoframe(anx78xx, &frame); > + if (err) > + DRM_ERROR("Failed to send AVI infoframe: %d\n", err); > + > +unlock: > + mutex_unlock(&anx78xx->lock); > +} > + > +static void anx78xx_bridge_enable(struct drm_bridge *bridge) { > + int err; > + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge); > + > + mutex_lock(&anx78xx->lock); > + > + err = anx78xx_start(anx78xx); > + if (err) > + DRM_ERROR("Failed to initialize: %d\n", err); > + > + err = anx78xx_set_hpd(anx78xx); > + if (err) > + DRM_ERROR("Failed to set HPD: %d\n", err); > + > + mutex_unlock(&anx78xx->lock); > +} > + > +static const struct drm_bridge_funcs anx78xx_bridge_funcs = { > + .attach = anx78xx_bridge_attach, > + .mode_fixup = anx78xx_bridge_mode_fixup, > + .disable = anx78xx_bridge_disable, > + .mode_set = anx78xx_bridge_mode_set, > + .enable = anx78xx_bridge_enable, > +}; > + > +static irqreturn_t anx78xx_hpd_threaded_handler(int unused, void *data) > +{ > + int err; > + struct anx78xx *anx78xx = data; > + > + if (anx78xx->powered) > + return IRQ_HANDLED; > + > + mutex_lock(&anx78xx->lock); > + > + /* Cable is pulled, power on the chip */ > + anx78xx_poweron(anx78xx); > + > + err = anx78xx_enable_interrupts(anx78xx); > + if (err) > + DRM_ERROR("Failed to enable interrupts: %d\n", err); > + > + mutex_unlock(&anx78xx->lock); > + > + return IRQ_HANDLED; > +} > + > +static int anx78xx_handle_dp_int_1(struct anx78xx *anx78xx, u8 irq) > +{ > + int err; > + > + DRM_DEBUG_KMS("Handle DP interrupt 1: %02x\n", irq); > + > + err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG, > + irq); > + if (err) > + return err; > + > + if (irq & SP_TRAINING_FINISH) { > + DRM_DEBUG_KMS("IRQ: hardware link training finished\n"); > + err = anx78xx_config_dp_output(anx78xx); > + } > + > + return err; > +} > + > +static bool anx78xx_handle_common_int_4(struct anx78xx *anx78xx, u8 irq) > +{ > + int err; > + bool event = false; > + > + DRM_DEBUG_KMS("Handle common interrupt 4: %02x\n", irq); > + > + err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], > + SP_COMMON_INT_STATUS4_REG, irq); > + if (err) { > + DRM_ERROR("Failed to write SP_COMMON_INT_STATUS4 %d\n", err); > + return event; > + } > + > + if (irq & SP_HPD_LOST) { > + DRM_DEBUG_KMS("IRQ: Hot plug detect - cable is pulled out\n"); > + event = true; > + anx78xx_poweroff(anx78xx); > + } else if (irq & SP_HPD_PLUG) { > + DRM_DEBUG_KMS("IRQ: Hot plug detect - cable plug\n"); > + event = true; > + /* Free previous cached EDID if any */ > + kfree(anx78xx->edid); > + anx78xx->edid = NULL; > + } > + > + return event; > +} > + > +static void anx78xx_handle_hdmi_int_1(struct anx78xx *anx78xx, u8 irq) > +{ > + int err; > + unsigned int regval; > + > + DRM_DEBUG_KMS("Handle HDMI interrupt 1: %02x\n", irq); > + > + err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG, > + irq); > + if (err) { > + DRM_ERROR("Write hdmi int 1 failed %d\n", err); > + return; > + } > + > + if ((irq & SP_CKDT_CHG) || (irq & SP_SCDT_CHG)) { > + DRM_DEBUG_KMS("IRQ: HDMI input detected\n"); > + err = regmap_read(anx78xx->map[I2C_IDX_RX_P0], > + SP_SYSTEM_STATUS_REG, ®val); > + if (err) { > + DRM_ERROR("Read system status reg failed %d\n", err); > + return; > + } > + > + if (!(regval & SP_TMDS_CLOCK_DET)) { > + DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI clock ***\n"); > + return; > + } > + if (!(regval & SP_TMDS_DE_DET)) { > + DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI signal ***\n"); > + return; > + } > + > + err = anx78xx_dp_link_training(anx78xx); > + if (err) > + DRM_ERROR("Failed to start link training: %d\n", err); > + } > +} > + > +static irqreturn_t anx78xx_intp_threaded_handler(int unused, void *data) > +{ > + struct anx78xx *anx78xx = data; > + int err; > + unsigned int irq; > + bool event = false; > + > + mutex_lock(&anx78xx->lock); > + > + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG, > + &irq); > + if (err) { > + DRM_ERROR("Failed to read dp int 1 status %d\n", err); > + goto unlock; > + } else if (irq) { > + anx78xx_handle_dp_int_1(anx78xx, irq); > + } > + > + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], > + SP_COMMON_INT_STATUS4_REG, &irq); > + if (err) { > + DRM_ERROR("Failed to read common int 4 status %d\n", err); > + goto unlock; > + } else if (irq) { > + event = anx78xx_handle_common_int_4(anx78xx, irq); > + } > + > + /* Make sure we are still powered after handle HPD events */ > + if (!anx78xx->powered) > + goto unlock; > + > + err = regmap_read(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG, > + &irq); > + if (err) > + DRM_ERROR("Failed to read hdmi int 1 status %d\n", err); > + else if (irq) > + anx78xx_handle_hdmi_int_1(anx78xx, irq); > + > +unlock: > + mutex_unlock(&anx78xx->lock); > + > + if (event) > + drm_helper_hpd_irq_event(anx78xx->connector.dev); > + > + return IRQ_HANDLED; > +} > + > +static void unregister_i2c_dummy_clients(struct anx78xx *anx78xx) > +{ > + int i; > + > + for (i = 0; i < ARRAY_SIZE(anx78xx->i2c_dummy); i++) > + if (anx78xx->i2c_dummy[i]) > + i2c_unregister_device(anx78xx->i2c_dummy[i]); > +} > + > +static const struct regmap_config anx78xx_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static const u16 anx78xx_chipid_list[] = { > + 0x7812, > + 0x7814, > + 0x7818, > +}; > + > +static int anx78xx_i2c_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct anx78xx *anx78xx; > + struct anx78xx_platform_data *pdata; > + int err, i; > + unsigned int idl, idh, version; > + bool found = false; > + > + anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL); > + if (!anx78xx) > + return -ENOMEM; > + > + pdata = &anx78xx->pdata; > + > + mutex_init(&anx78xx->lock); > + > +#if IS_ENABLED(CONFIG_OF) > + anx78xx->bridge.of_node = client->dev.of_node; > +#endif > + > + anx78xx->client = client; > + i2c_set_clientdata(client, anx78xx); > + > + err = anx78xx_init_gpio(anx78xx); > + if (err) { > + DRM_ERROR("Failed to initialize gpios\n"); > + return err; > + } > + > + pdata->hpd_irq = gpiod_to_irq(pdata->gpiod_hpd); > + if (pdata->hpd_irq < 0) { > + DRM_ERROR("Failed to get hpd irq %d\n", > + pdata->hpd_irq); > + return -ENODEV; > + } > + > + pdata->intp_irq = client->irq; > + if (!pdata->intp_irq) { > + DRM_ERROR("Failed to get CABLE_DET and INTP irq\n"); > + return -ENODEV; > + } > + > + /* Map slave addresses of ANX7814 */ > + for (i = 0; i < I2C_NUM_ADDRESSES; i++) { > + anx78xx->i2c_dummy[i] = i2c_new_dummy(client->adapter, > + anx78xx_i2c_addresses[i] >> 1); > + if (!anx78xx->i2c_dummy[i]) { > + err = -ENOMEM; > + DRM_ERROR("Failed to reserve i2c bus %02x.\n", > + anx78xx_i2c_addresses[i]); > + goto err_unregister_i2c; > + } > + > + anx78xx->map[i] = devm_regmap_init_i2c(anx78xx->i2c_dummy[i], > + &anx78xx_regmap_config); > + if (IS_ERR(anx78xx->map[i])) { > + err = PTR_ERR(anx78xx->map[i]); > + DRM_ERROR("Failed regmap initialization %02x.\n", > + anx78xx_i2c_addresses[i]); > + goto err_unregister_i2c; > + } > + } > + > + /* Look for supported chip id */ > + anx78xx_poweron(anx78xx); > + > + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDL_REG, > + &idl); > + if (err) > + goto err_poweroff; > + > + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDH_REG, > + &idh); > + if (err) > + goto err_poweroff; > + > + anx78xx->chipid = (u8)idl | ((u8)idh << 8); > + > + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_VERSION_REG, > + &version); > + if (err) > + goto err_poweroff; > + > + for (i = 0; i < ARRAY_SIZE(anx78xx_chipid_list); i++) { > + if (anx78xx->chipid == anx78xx_chipid_list[i]) { > + DRM_INFO("Found ANX%x (ver. %d) SlimPort Transmitter\n", > + anx78xx->chipid, version); > + found = true; > + break; > + } > + } > + > + if (!found) { > + DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n", > + anx78xx->chipid, version); > + err = -ENODEV; > + goto err_poweroff; > + } > + > + err = devm_request_threaded_irq(&client->dev, pdata->hpd_irq, > + NULL, > + anx78xx_hpd_threaded_handler, > + IRQF_TRIGGER_RISING | IRQF_ONESHOT, > + "anx78xx-hpd", anx78xx); > + if (err) { > + DRM_ERROR("Failed to request CABLE_DET threaded irq\n"); > + goto err_poweroff; > + } > + > + err = devm_request_threaded_irq(&client->dev, pdata->intp_irq, NULL, > + anx78xx_intp_threaded_handler, > + IRQF_TRIGGER_RISING | IRQF_ONESHOT, > + "anx78xx-intp", anx78xx); > + if (err) { > + DRM_ERROR("Failed to request INTP threaded irq\n"); > + goto err_poweroff; > + } > + > + anx78xx->bridge.funcs = &anx78xx_bridge_funcs; > + err = drm_bridge_add(&anx78xx->bridge); > + if (err < 0) { > + DRM_ERROR("Failed to add drm bridge\n"); > + goto err_poweroff; > + } > + > + /* If cable is pulled out, just poweroff and wait for hpd event */ > + if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd)) > + anx78xx_poweroff(anx78xx); > + > + return 0; > + > +err_poweroff: > + anx78xx_poweroff(anx78xx); > + > +err_unregister_i2c: > + unregister_i2c_dummy_clients(anx78xx); > + return err; > +} > + > +static int anx78xx_i2c_remove(struct i2c_client *client) > +{ > + struct anx78xx *anx78xx = i2c_get_clientdata(client); > + > + drm_bridge_remove(&anx78xx->bridge); > + > + unregister_i2c_dummy_clients(anx78xx); > + > + kfree(anx78xx->edid); > + anx78xx->edid = NULL; > + > + return 0; > +} > + > +static const struct i2c_device_id anx78xx_id[] = { > + {"anx7814", 0}, > + { /* sentinel */ } > +}; > + > +MODULE_DEVICE_TABLE(i2c, anx78xx_id); > + > +#if IS_ENABLED(CONFIG_OF) > +static const struct of_device_id anx78xx_match_table[] = { > + {.compatible = "analogix,anx7814",}, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, anx78xx_match_table); > +#endif > + > +static struct i2c_driver anx78xx_driver = { > + .driver = { > + .name = "anx7814", > + .of_match_table = of_match_ptr(anx78xx_match_table), > + }, > + .probe = anx78xx_i2c_probe, > + .remove = anx78xx_i2c_remove, > + .id_table = anx78xx_id, > +}; > + > +module_i2c_driver(anx78xx_driver); > + > +MODULE_DESCRIPTION("ANX78xx SlimPort Transmitter driver"); > +MODULE_AUTHOR("Enric Balletbo i Serra "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/gpu/drm/bridge/anx78xx.h b/drivers/gpu/drm/bridge/anx78xx.h > new file mode 100644 > index 0000000..38753c8 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/anx78xx.h > @@ -0,0 +1,719 @@ > +/* > + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef __ANX78xx_H > +#define __ANX78xx_H > + > +#define TX_P0 0x70 > +#define TX_P1 0x7a > +#define TX_P2 0x72 > + > +#define RX_P0 0x7e > +#define RX_P1 0x80 > + > +/***************************************************************/ > +/* Register definition of device address 0x7e */ > +/***************************************************************/ > + > +/* > + * System Control and Status > + */ > + > +/* Software Reset Register 1 */ > +#define SP_SOFTWARE_RESET1_REG 0x11 > +#define SP_VIDEO_RST BIT(4) > +#define SP_HDCP_MAN_RST BIT(2) > +#define SP_TMDS_RST BIT(1) > +#define SP_SW_MAN_RST BIT(0) > + > +/* System Status Register */ > +#define SP_SYSTEM_STATUS_REG 0x14 > +#define SP_TMDS_CLOCK_DET BIT(1) > +#define SP_TMDS_DE_DET BIT(0) > + > +/* HDMI Status Register */ > +#define SP_HDMI_STATUS_REG 0x15 > +#define SP_HDMI_AUD_LAYOUT BIT(3) > +#define SP_HDMI_DET BIT(0) > +# define SP_DVI_MODE 0 > +# define SP_HDMI_MODE 1 > + > +/* HDMI Mute Control Register */ > +#define SP_HDMI_MUTE_CTRL_REG 0x16 > +#define SP_AUD_MUTE BIT(1) > +#define SP_VID_MUTE BIT(0) > + > +/* System Power Down Register 1 */ > +#define SP_SYSTEM_POWER_DOWN1_REG 0x18 > +#define SP_PWDN_CTRL BIT(0) > + > +/* > + * Audio and Video Auto Control > + */ > + > +/* Auto Audio and Video Control register */ > +#define SP_AUDVID_CTRL_REG 0x20 > +#define SP_AVC_OE BIT(7) > +#define SP_AAC_OE BIT(6) > +#define SP_AVC_EN BIT(1) > +#define SP_AAC_EN BIT(0) > + > +/* Audio Exception Enable Registers */ > +#define SP_AUD_EXCEPTION_ENABLE_BASE (0x24 - 1) > +/* Bits for Audio Exception Enable Register 3 */ > +#define SP_AEC_EN21 BIT(5) > + > +/* > + * Interrupt > + */ > + > +/* Interrupt Status Register 1 */ > +#define SP_INT_STATUS1_REG 0x31 > +/* Bits for Interrupt Status Register 1 */ > +#define SP_HDMI_DVI BIT(7) > +#define SP_CKDT_CHG BIT(6) > +#define SP_SCDT_CHG BIT(5) > +#define SP_PCLK_CHG BIT(4) > +#define SP_PLL_UNLOCK BIT(3) > +#define SP_CABLE_PLUG_CHG BIT(2) > +#define SP_SET_MUTE BIT(1) > +#define SP_SW_INTR BIT(0) > +/* Bits for Interrupt Status Register 2 */ > +#define SP_HDCP_ERR BIT(5) > +#define SP_AUDIO_SAMPLE_CHG BIT(0) /* undocumented */ > +/* Bits for Interrupt Status Register 3 */ > +#define SP_AUD_MODE_CHG BIT(0) > +/* Bits for Interrupt Status Register 5 */ > +#define SP_AUDIO_RCV BIT(0) > +/* Bits for Interrupt Status Register 6 */ > +#define SP_INT_STATUS6_REG 0x36 > +#define SP_CTS_RCV BIT(7) > +#define SP_NEW_AUD_PKT BIT(4) > +#define SP_NEW_AVI_PKT BIT(1) > +#define SP_NEW_CP_PKT BIT(0) > +/* Bits for Interrupt Status Register 7 */ > +#define SP_NO_VSI BIT(7) > +#define SP_NEW_VS BIT(4) > + > +/* Interrupt Mask 1 Status Registers */ > +#define SP_INT_MASK1_REG 0x41 > + > +/* HDMI US TIMER Control Register */ > +#define SP_HDMI_US_TIMER_CTRL_REG 0x49 > +#define SP_MS_TIMER_MARGIN_10_8_MASK 0x07 > + > +/* > + * TMDS Control > + */ > + > +/* TMDS Control Registers */ > +#define SP_TMDS_CTRL_BASE (0x50 - 1) > +/* Bits for TMDS Control Register 7 */ > +#define SP_PD_RT BIT(0) > + > +/* > + * Video Control > + */ > + > +/* Video Status Register */ > +#define SP_VIDEO_STATUS_REG 0x70 > +#define SP_COLOR_DEPTH_MASK 0xf0 > +#define SP_COLOR_DEPTH_SHIFT 4 > +# define SP_COLOR_DEPTH_MODE_LEGACY 0x00 > +# define SP_COLOR_DEPTH_MODE_24BIT 0x04 > +# define SP_COLOR_DEPTH_MODE_30BIT 0x05 > +# define SP_COLOR_DEPTH_MODE_36BIT 0x06 > +# define SP_COLOR_DEPTH_MODE_48BIT 0x07 > + > +/* Video Data Range Control Register */ > +#define SP_VID_DATA_RANGE_CTRL_REG 0x83 > +#define SP_R2Y_INPUT_LIMIT BIT(1) > + > +/* Pixel Clock High Resolution Counter Registers */ > +#define SP_PCLK_HIGHRES_CNT_BASE (0x8c - 1) > + > +/* > + * Audio Control > + */ > + > +/* Number of Audio Channels Status Registers */ > +#define SP_AUD_CH_STATUS_REG_NUM 6 > + > +/* Audio IN S/PDIF Channel Status Registers */ > +#define SP_AUD_SPDIF_CH_STATUS_BASE 0xc7 > + > +/* Audio IN S/PDIF Channel Status Register 4 */ > +#define SP_FS_FREQ_MASK 0x0f > +# define SP_FS_FREQ_44100HZ 0x00 > +# define SP_FS_FREQ_48000HZ 0x02 > +# define SP_FS_FREQ_32000HZ 0x03 > +# define SP_FS_FREQ_88200HZ 0x08 > +# define SP_FS_FREQ_96000HZ 0x0a > +# define SP_FS_FREQ_176400HZ 0x0c > +# define SP_FS_FREQ_192000HZ 0x0e > + > +/* > + * Micellaneous Control Block > + */ > + > +/* CHIP Control Register */ > +#define SP_CHIP_CTRL_REG 0xe3 > +#define SP_MAN_HDMI5V_DET BIT(3) > +#define SP_PLLLOCK_CKDT_EN BIT(2) > +#define SP_ANALOG_CKDT_EN BIT(1) > +#define SP_DIGITAL_CKDT_EN BIT(0) > + > +/* Packet Receiving Status Register */ > +#define SP_PACKET_RECEIVING_STATUS_REG 0xf3 > +#define SP_AVI_RCVD BIT(5) > +#define SP_VSI_RCVD BIT(1) > + > +/***************************************************************/ > +/* Register definition of device address 0x80 */ > +/***************************************************************/ > + > +/* HDCP BCAPS Shadow Register */ > +#define SP_HDCP_BCAPS_SHADOW_REG 0x2a > +#define SP_BCAPS_REPEATER BIT(5) > + > +/* HDCP Status Register */ > +#define SP_RX_HDCP_STATUS_REG 0x3f > +#define SP_AUTH_EN BIT(4) > + > +/* > + * InfoFrame and Control Packet Registers > + */ > + > +/* AVI InfoFrame packet checksum */ > +#define SP_AVI_INFOFRAME_CHECKSUM 0xa3 > + > +/* AVI InfoFrame Registers */ > +#define SP_AVI_INFOFRAME_DATA_BASE 0xa4 > + > +#define SP_AVI_COLOR_F_MASK 0x60 > +#define SP_AVI_COLOR_F_SHIFT 5 > + > +/* Audio InfoFrame Registers */ > +#define SP_AUD_INFOFRAME_DATA_BASE 0xc4 > +#define SP_AUD_INFOFRAME_LAYOUT_MASK 0x0f > + > +/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */ > +#define SP_MPEG_VS_INFOFRAME_TYPE_REG 0xe0 > + > +/* MPEG/HDMI Vendor Specific InfoFrame Packet length */ > +#define SP_MPEG_VS_INFOFRAME_LEN_REG 0xe2 > + > +/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */ > +#define SP_MPEG_VS_INFOFRAME_VER_REG 0xe1 > + > +/* MPEG/HDMI Vendor Specific InfoFrame Packet content */ > +#define SP_MPEG_VS_INFOFRAME_DATA_BASE 0xe4 > + > +/* General Control Packet Register */ > +#define SP_GENERAL_CTRL_PACKET_REG 0x9f > +#define SP_CLEAR_AVMUTE BIT(4) > +#define SP_SET_AVMUTE BIT(0) > + > +/***************************************************************/ > +/* Register definition of device address 0x70 */ > +/***************************************************************/ > + > +/* HDCP Status Register */ > +#define SP_TX_HDCP_STATUS_REG 0x00 > +#define SP_AUTH_FAIL BIT(5) > +#define SP_AUTHEN_PASS BIT(1) > + > +/* HDCP Control Register 0 */ > +#define SP_HDCP_CTRL0_REG 0x01 > +#define SP_RX_REPEATER BIT(6) > +#define SP_RE_AUTH BIT(5) > +#define SP_SW_AUTH_OK BIT(4) > +#define SP_HARD_AUTH_EN BIT(3) > +#define SP_HDCP_ENC_EN BIT(2) > +#define SP_BKSV_SRM_PASS BIT(1) > +#define SP_KSVLIST_VLD BIT(0) > +/* HDCP Function Enabled */ > +#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3)) > + > +/* HDCP Receiver BSTATUS Register 0 */ > +#define SP_HDCP_RX_BSTATUS0_REG 0x1b > +/* HDCP Receiver BSTATUS Register 1 */ > +#define SP_HDCP_RX_BSTATUS1_REG 0x1c > + > +/* HDCP Embedded "Blue Screen" Content Registers */ > +#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c > +#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d > +#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e > + > +/* HDCP Wait R0 Timing Register */ > +#define SP_HDCP_WAIT_R0_TIME_REG 0x40 > + > +/* HDCP Link Integrity Check Timer Register */ > +#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41 > + > +/* HDCP Repeater Ready Wait Timer Register */ > +#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42 > + > +/* HDCP Auto Timer Register */ > +#define SP_HDCP_AUTO_TIMER_REG 0x51 > + > +/* HDCP Key Status Register */ > +#define SP_HDCP_KEY_STATUS_REG 0x5e > + > +/* HDCP Key Command Register */ > +#define SP_HDCP_KEY_COMMAND_REG 0x5f > +#define SP_DISABLE_SYNC_HDCP BIT(2) > + > +/* OTP Memory Key Protection Registers */ > +#define SP_OTP_KEY_PROTECT1_REG 0x60 > +#define SP_OTP_KEY_PROTECT2_REG 0x61 > +#define SP_OTP_KEY_PROTECT3_REG 0x62 > +#define SP_OTP_PSW1 0xa2 > +#define SP_OTP_PSW2 0x7e > +#define SP_OTP_PSW3 0xc6 > + > +/* DP System Control Registers */ > +#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1) > +/* Bits for DP System Control Register 2 */ > +#define SP_CHA_STA BIT(2) > +/* Bits for DP System Control Register 3 */ > +#define SP_HPD_STATUS BIT(6) > +#define SP_STRM_VALID BIT(2) > +/* Bits for DP System Control Register 4 */ > +#define SP_ENHANCED_MODE BIT(3) > + > +/* DP Video Control Register */ > +#define SP_DP_VIDEO_CTRL_REG 0x84 > +#define SP_COLOR_F_MASK 0x06 > +#define SP_COLOR_F_SHIFT 1 > +#define SP_BPC_MASK 0xe0 > +#define SP_BPC_SHIFT 5 > +# define SP_BPC_6BITS 0x00 > +# define SP_BPC_8BITS 0x01 > +# define SP_BPC_10BITS 0x02 > +# define SP_BPC_12BITS 0x03 > + > +/* DP Audio Control Register */ > +#define SP_DP_AUDIO_CTRL_REG 0x87 > +#define SP_AUD_EN BIT(0) > + > +/* 10us Pulse Generate Timer Registers */ > +#define SP_I2C_GEN_10US_TIMER0_REG 0x88 > +#define SP_I2C_GEN_10US_TIMER1_REG 0x89 > + > +/* Packet Send Control Register */ > +#define SP_PACKET_SEND_CTRL_REG 0x90 > +#define SP_AUD_IF_UP BIT(7) > +#define SP_AVI_IF_UD BIT(6) > +#define SP_MPEG_IF_UD BIT(5) > +#define SP_SPD_IF_UD BIT(4) > +#define SP_AUD_IF_EN BIT(3) > +#define SP_AVI_IF_EN BIT(2) > +#define SP_MPEG_IF_EN BIT(1) > +#define SP_SPD_IF_EN BIT(0) > + > +/* DP HDCP Control Register */ > +#define SP_DP_HDCP_CTRL_REG 0x92 > +#define SP_AUTO_EN BIT(7) > +#define SP_AUTO_START BIT(5) > +#define SP_LINK_POLLING BIT(1) > + > +/* DP Main Link Bandwidth Setting Register */ > +#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0 > +#define SP_LINK_BW_SET_MASK 0x1f > +#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5) > + > +/* DP Training Pattern Set Register */ > +#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2 > + > +/* DP Lane 0 Link Training Control Register */ > +#define SP_DP_LANE0_LT_CTRL_REG 0xa3 > +#define SP_TX_SW_SET_MASK 0x1b > +#define SP_MAX_PRE_REACH BIT(5) > +#define SP_MAX_DRIVE_REACH BIT(4) > +#define SP_PRE_EMP_LEVEL1 BIT(3) > +#define SP_DRVIE_CURRENT_LEVEL1 BIT(0) > + > +/* DP Link Training Control Register */ > +#define SP_DP_LT_CTRL_REG 0xa8 > +#define SP_LT_ERROR_TYPE_MASK 0x70 > +# define SP_LT_NO_ERROR 0x00 > +# define SP_LT_AUX_WRITE_ERROR 0x01 > +# define SP_LT_MAX_DRIVE_REACHED 0x02 > +# define SP_LT_WRONG_LANE_COUNT_SET 0x03 > +# define SP_LT_LOOP_SAME_5_TIME 0x04 > +# define SP_LT_CR_FAIL_IN_EQ 0x05 > +# define SP_LT_EQ_LOOP_5_TIME 0x06 > +#define SP_LT_EN BIT(0) > + > +/* DP CEP Training Control Registers */ > +#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9 > +#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa > + > +/* DP Debug Register 1 */ > +#define SP_DP_DEBUG1_REG 0xb0 > +#define SP_DEBUG_PLL_LOCK BIT(4) > +#define SP_POLLING_EN BIT(1) > + > +/* DP Polling Control Register */ > +#define SP_DP_POLLING_CTRL_REG 0xb4 > +#define SP_AUTO_POLLING_DISABLE BIT(0) > + > +/* DP Link Debug Control Register */ > +#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8 > +#define SP_M_VID_DEBUG BIT(5) > +#define SP_NEW_PRBS7 BIT(4) > +#define SP_INSERT_ER BIT(1) > +#define SP_PRBS31_EN BIT(0) > + > +/* AUX Misc control Register */ > +#define SP_AUX_MISC_CTRL_REG 0xbf > + > +/* DP PLL control Register */ > +#define SP_DP_PLL_CTRL_REG 0xc7 > +#define SP_PLL_RST BIT(6) > + > +/* DP Analog Power Down Register */ > +#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8 > +#define SP_CH0_PD BIT(0) > + > +/* DP Misc Control Register */ > +#define SP_DP_MISC_CTRL_REG 0xcd > +#define SP_EQ_TRAINING_LOOP BIT(6) > + > +/* DP Extra I2C Device Address Register */ > +#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce > +#define SP_I2C_STRETCH_DISABLE BIT(7) > + > +#define SP_I2C_EXTRA_ADDR 0x50 > + > +/* DP Downspread Control Register 1 */ > +#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0 > + > +/* DP M Value Calculation Control Register */ > +#define SP_DP_M_CALCULATION_CTRL_REG 0xd9 > +#define SP_M_GEN_CLK_SEL BIT(0) > + > +/* AUX Channel Access Status Register */ > +#define SP_AUX_CH_STATUS_REG 0xe0 > +#define SP_AUX_STATUS 0x0f > + > +/* AUX Channel DEFER Control Register */ > +#define SP_AUX_DEFER_CTRL_REG 0xe2 > +#define SP_DEFER_CTRL_EN BIT(7) > + > +/* DP Buffer Data Count Register */ > +#define SP_BUF_DATA_COUNT_REG 0xe4 > +#define SP_BUF_DATA_COUNT_MASK 0x1f > +#define SP_BUF_CLR BIT(7) > + > +/* DP AUX Channel Control Register 1 */ > +#define SP_DP_AUX_CH_CTRL1_REG 0xe5 > +#define SP_AUX_TX_COMM_MASK 0x0f > +#define SP_AUX_LENGTH_MASK 0xf0 > +#define SP_AUX_LENGTH_SHIFT 4 > + > +/* DP AUX CH Address Register 0 */ > +#define SP_AUX_ADDR_7_0_REG 0xe6 > + > +/* DP AUX CH Address Register 1 */ > +#define SP_AUX_ADDR_15_8_REG 0xe7 > + > +/* DP AUX CH Address Register 2 */ > +#define SP_AUX_ADDR_19_16_REG 0xe8 > +#define SP_AUX_ADDR_19_16_MASK 0x0f > + > +/* DP AUX Channel Control Register 2 */ > +#define SP_DP_AUX_CH_CTRL2_REG 0xe9 > +#define SP_AUX_SEL_RXCM BIT(6) > +#define SP_AUX_CHSEL BIT(3) > +#define SP_AUX_PN_INV BIT(2) > +#define SP_ADDR_ONLY BIT(1) > +#define SP_AUX_EN BIT(0) > + > +/* DP Video Stream Control InfoFrame Register */ > +#define SP_DP_3D_VSC_CTRL_REG 0xea > +#define SP_INFO_FRAME_VSC_EN BIT(0) > + > +/* DP Video Stream Data Byte 1 Register */ > +#define SP_DP_VSC_DB1_REG 0xeb > + > +/* DP AUX Channel Control Register 3 */ > +#define SP_DP_AUX_CH_CTRL3_REG 0xec > +#define SP_WAIT_COUNTER_7_0_MASK 0xff > + > +/* DP AUX Channel Control Register 4 */ > +#define SP_DP_AUX_CH_CTRL4_REG 0xed > + > +/* DP AUX Buffer Data Registers */ > +#define SP_DP_BUF_DATA0_REG 0xf0 > + > +/***************************************************************/ > +/* Register definition of device address 0x72 */ > +/***************************************************************/ > + > +/* > + * Core Register Definitions > + */ > + > +/* Device ID Low Byte Register */ > +#define SP_DEVICE_IDL_REG 0x02 > + > +/* Device ID High Byte Register */ > +#define SP_DEVICE_IDH_REG 0x03 > + > +/* Device version register */ > +#define SP_DEVICE_VERSION_REG 0x04 > + > +/* Power Down Control Register */ > +#define SP_POWERDOWN_CTRL_REG 0x05 > +#define SP_REGISTER_PD BIT(7) > +#define SP_HDCP_PD BIT(5) > +#define SP_AUDIO_PD BIT(4) > +#define SP_VIDEO_PD BIT(3) > +#define SP_LINK_PD BIT(2) > +#define SP_TOTAL_PD BIT(1) > + > +/* Reset Control Register 1 */ > +#define SP_RESET_CTRL1_REG 0x06 > +#define SP_MISC_RST BIT(7) > +#define SP_VIDCAP_RST BIT(6) > +#define SP_VIDFIF_RST BIT(5) > +#define SP_AUDFIF_RST BIT(4) > +#define SP_AUDCAP_RST BIT(3) > +#define SP_HDCP_RST BIT(2) > +#define SP_SW_RST BIT(1) > +#define SP_HW_RST BIT(0) > + > +/* Reset Control Register 2 */ > +#define SP_RESET_CTRL2_REG 0x07 > +#define SP_AUX_RST BIT(2) > +#define SP_SERDES_FIFO_RST BIT(1) > +#define SP_I2C_REG_RST BIT(0) > + > +/* Video Control Register 1 */ > +#define SP_VID_CTRL1_REG 0x08 > +#define SP_VIDEO_EN BIT(7) > +#define SP_VIDEO_MUTE BIT(2) > +#define SP_DE_GEN BIT(1) > +#define SP_DEMUX BIT(0) > + > +/* Video Control Register 2 */ > +#define SP_VID_CTRL2_REG 0x09 > +#define SP_IN_COLOR_F_MASK 0x03 > +#define SP_IN_YC_BIT_SEL BIT(2) > +#define SP_IN_BPC_MASK 0x70 > +#define SP_IN_BPC_SHIFT 4 > +# define SP_IN_BPC_12BIT 0x03 > +# define SP_IN_BPC_10BIT 0x02 > +# define SP_IN_BPC_8BIT 0x01 > +# define SP_IN_BPC_6BIT 0x00 > +#define SP_IN_D_RANGE BIT(7) > + > +/* Video Control Register 3 */ > +#define SP_VID_CTRL3_REG 0x0a > +#define SP_HPD_OUT BIT(6) > + > +/* Video Control Register 5 */ > +#define SP_VID_CTRL5_REG 0x0c > +#define SP_CSC_STD_SEL BIT(7) > +#define SP_XVYCC_RNG_LMT BIT(6) > +#define SP_RANGE_Y2R BIT(5) > +#define SP_CSPACE_Y2R BIT(4) > +#define SP_RGB_RNG_LMT BIT(3) > +#define SP_Y_RNG_LMT BIT(2) > +#define SP_RANGE_R2Y BIT(1) > +#define SP_CSPACE_R2Y BIT(0) > + > +/* Video Control Register 6 */ > +#define SP_VID_CTRL6_REG 0x0d > +#define SP_TEST_PATTERN_EN BIT(7) > +#define SP_VIDEO_PROCESS_EN BIT(6) > +#define SP_VID_US_MODE BIT(3) > +#define SP_VID_DS_MODE BIT(2) > +#define SP_UP_SAMPLE BIT(1) > +#define SP_DOWN_SAMPLE BIT(0) > + > +/* Video Control Register 8 */ > +#define SP_VID_CTRL8_REG 0x0f > +#define SP_VID_VRES_TH BIT(0) > + > +/* Total Line Status Low Byte Register */ > +#define SP_TOTAL_LINE_STAL_REG 0x24 > + > +/* Total Line Status High Byte Register */ > +#define SP_TOTAL_LINE_STAH_REG 0x25 > + > +/* Active Line Status Low Byte Register */ > +#define SP_ACT_LINE_STAL_REG 0x26 > + > +/* Active Line Status High Byte Register */ > +#define SP_ACT_LINE_STAH_REG 0x27 > + > +/* Vertical Front Porch Status Register */ > +#define SP_V_F_PORCH_STA_REG 0x28 > + > +/* Vertical SYNC Width Status Register */ > +#define SP_V_SYNC_STA_REG 0x29 > + > +/* Vertical Back Porch Status Register */ > +#define SP_V_B_PORCH_STA_REG 0x2a > + > +/* Total Pixel Status Low Byte Register */ > +#define SP_TOTAL_PIXEL_STAL_REG 0x2b > + > +/* Total Pixel Status High Byte Register */ > +#define SP_TOTAL_PIXEL_STAH_REG 0x2c > + > +/* Active Pixel Status Low Byte Register */ > +#define SP_ACT_PIXEL_STAL_REG 0x2d > + > +/* Active Pixel Status High Byte Register */ > +#define SP_ACT_PIXEL_STAH_REG 0x2e > + > +/* Horizontal Front Porch Status Low Byte Register */ > +#define SP_H_F_PORCH_STAL_REG 0x2f > + > +/* Horizontal Front Porch Statys High Byte Register */ > +#define SP_H_F_PORCH_STAH_REG 0x30 > + > +/* Horizontal SYNC Width Status Low Byte Register */ > +#define SP_H_SYNC_STAL_REG 0x31 > + > +/* Horizontal SYNC Width Status High Byte Register */ > +#define SP_H_SYNC_STAH_REG 0x32 > + > +/* Horizontal Back Porch Status Low Byte Register */ > +#define SP_H_B_PORCH_STAL_REG 0x33 > + > +/* Horizontal Back Porch Status High Byte Register */ > +#define SP_H_B_PORCH_STAH_REG 0x34 > + > +/* InfoFrame AVI Packet DB1 Register */ > +#define SP_INFOFRAME_AVI_DB1_REG 0x70 > + > +/* Bit Control Specific Register */ > +#define SP_BIT_CTRL_SPECIFIC_REG 0x80 > +#define SP_BIT_CTRL_SELECT_SHIFT 1 > +#define SP_ENABLE_BIT_CTRL BIT(0) > + > +/* InfoFrame Audio Packet DB1 Register */ > +#define SP_INFOFRAME_AUD_DB1_REG 0x83 > + > +/* InfoFrame MPEG Packet DB1 Register */ > +#define SP_INFOFRAME_MPEG_DB1_REG 0xb0 > + > +/* Audio Channel Status Registers */ > +#define SP_AUD_CH_STATUS_BASE 0xd0 > + > +/* Audio Channel Num Register 5 */ > +#define SP_I2S_CHANNEL_NUM_MASK 0xe0 > +# define SP_I2S_CH_NUM_1 (0x00 << 5) > +# define SP_I2S_CH_NUM_2 (0x01 << 5) > +# define SP_I2S_CH_NUM_3 (0x02 << 5) > +# define SP_I2S_CH_NUM_4 (0x03 << 5) > +# define SP_I2S_CH_NUM_5 (0x04 << 5) > +# define SP_I2S_CH_NUM_6 (0x05 << 5) > +# define SP_I2S_CH_NUM_7 (0x06 << 5) > +# define SP_I2S_CH_NUM_8 (0x07 << 5) > +#define SP_EXT_VUCP BIT(2) > +#define SP_VBIT BIT(1) > +#define SP_AUDIO_LAYOUT BIT(0) > + > +/* Analog Debug Register 2 */ > +#define SP_ANALOG_DEBUG2_REG 0xdd > +#define SP_FORCE_SW_OFF_BYPASS 0x20 > +#define SP_XTAL_FRQ 0x1c > +# define SP_XTAL_FRQ_19M2 (0x00 << 2) > +# define SP_XTAL_FRQ_24M (0x01 << 2) > +# define SP_XTAL_FRQ_25M (0x02 << 2) > +# define SP_XTAL_FRQ_26M (0x03 << 2) > +# define SP_XTAL_FRQ_27M (0x04 << 2) > +# define SP_XTAL_FRQ_38M4 (0x05 << 2) > +# define SP_XTAL_FRQ_52M (0x06 << 2) > +#define SP_POWERON_TIME_1P5MS 0x03 > + > +/* Analog Control 0 Register */ > +#define SP_ANALOG_CTRL0_REG 0xe1 > + > +/* Common Interrupt Status Register 1 */ > +#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1) > +#define SP_PLL_LOCK_CHG 0x40 > + > +/* Common Interrupt Status Register 2 */ > +#define SP_COMMON_INT_STATUS2 0xf2 > +#define SP_HDCP_AUTH_CHG BIT(1) > +#define SP_HDCP_AUTH_DONE BIT(0) > + > +#define SP_HDCP_LINK_CHECK_FAIL BIT(0) > + > +/* Common Interrupt Status Register 4 */ > +#define SP_COMMON_INT_STATUS4_REG 0xf4 > +#define SP_HPD_IRQ BIT(6) > +#define SP_HPD_ESYNC_ERR BIT(4) > +#define SP_HPD_CHG BIT(2) > +#define SP_HPD_LOST BIT(1) > +#define SP_HPD_PLUG BIT(0) > + > +/* DP Interrupt Status Register */ > +#define SP_DP_INT_STATUS1_REG 0xf7 > +#define SP_TRAINING_FINISH BIT(5) > +#define SP_POLLING_ERR BIT(4) > + > +/* Common Interrupt Mask Register */ > +#define SP_COMMON_INT_MASK_BASE (0xf8 - 1) > + > +#define SP_COMMON_INT_MASK4_REG 0xfb > + > +/* DP Interrupts Mask Register */ > +#define SP_DP_INT_MASK1_REG 0xfe > + > +/* Interrupt Control Register */ > +#define SP_INT_CTRL_REG 0xff > + > +/***************************************************************/ > +/* Register definition of device address 0x7a */ > +/***************************************************************/ > + > +/* DP TX Link Training Control Register */ > +#define SP_DP_TX_LT_CTRL0_REG 0x30 > + > +/* PD 1.2 Lint Training 80bit Pattern Register */ > +#define SP_DP_LT_80BIT_PATTERN0_REG 0x80 > +#define SP_DP_LT_80BIT_PATTERN_REG_NUM 10 > + > +/* Audio Interface Control Register 0 */ > +#define SP_AUD_INTERFACE_CTRL0_REG 0x5f > +#define SP_AUD_INTERFACE_DISABLE 0x80 > + > +/* Audio Interface Control Register 2 */ > +#define SP_AUD_INTERFACE_CTRL2_REG 0x60 > +#define SP_M_AUD_ADJUST_ST 0x04 > + > +/* Audio Interface Control Register 3 */ > +#define SP_AUD_INTERFACE_CTRL3_REG 0x62 > + > +/* Audio Interface Control Register 4 */ > +#define SP_AUD_INTERFACE_CTRL4_REG 0x67 > + > +/* Audio Interface Control Register 5 */ > +#define SP_AUD_INTERFACE_CTRL5_REG 0x68 > + > +/* Audio Interface Control Register 6 */ > +#define SP_AUD_INTERFACE_CTRL6_REG 0x69 > + > +/* Firmware Version Register */ > +#define SP_FW_VER_REG 0xb7 > + > +#endif > -- > 2.1.0 >