Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932311AbcDJTFu (ORCPT ); Sun, 10 Apr 2016 15:05:50 -0400 Received: from mail.linuxfoundation.org ([140.211.169.12]:53677 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759915AbcDJTEF (ORCPT ); Sun, 10 Apr 2016 15:04:05 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Harry Junior , Tony Luck , Thomas Gleixner , Peter Zijlstra , Joe Lawrence , Borislav Petkov , Ben Hutchings Subject: [PATCH 4.4 033/210] x86/irq: Cure live lock in fixup_irqs() Date: Sun, 10 Apr 2016 11:34:14 -0700 Message-Id: <20160410183527.836681419@linuxfoundation.org> X-Mailer: git-send-email 2.8.0 In-Reply-To: <20160410183526.651820045@linuxfoundation.org> References: <20160410183526.651820045@linuxfoundation.org> User-Agent: quilt/0.64 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8784 Lines: 221 4.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Thomas Gleixner commit 551adc60573cb68e3d55cacca9ba1b7437313df7 upstream. Harry reported, that he's able to trigger a system freeze with cpu hot unplug. The freeze turned out to be a live lock caused by recent changes in irq_force_complete_move(). When fixup_irqs() and from there irq_force_complete_move() is called on the dying cpu, then all other cpus are in stop machine an wait for the dying cpu to complete the teardown. If there is a move of an interrupt pending then irq_force_complete_move() sends the cleanup IPI to the cpus in the old_domain mask and waits for them to clear the mask. That's obviously impossible as those cpus are firmly stuck in stop machine with interrupts disabled. I should have known that, but I completely overlooked it being concentrated on the locking issues around the vectors. And the existance of the call to __irq_complete_move() in the code, which actually sends the cleanup IPI made it reasonable to wait for that cleanup to complete. That call was bogus even before the recent changes as it was just a pointless distraction. We have to look at two cases: 1) The move_in_progress flag of the interrupt is set This means the ioapic has been updated with the new vector, but it has not fired yet. In theory there is a race: set_ioapic(new_vector) <-- Interrupt is raised before update is effective, i.e. it's raised on the old vector. So if the target cpu cannot handle that interrupt before the old vector is cleaned up, we get a spurious interrupt and in the worst case the ioapic irq line becomes stale, but my experiments so far have only resulted in spurious interrupts. But in case of cpu hotplug this should be a non issue because if the affinity update happens right before all cpus rendevouz in stop machine, there is no way that the interrupt can be blocked on the target cpu because all cpus loops first with interrupts enabled in stop machine, so the old vector is not yet cleaned up when the interrupt fires. So the only way to run into this issue is if the delivery of the interrupt on the apic/system bus would be delayed beyond the point where the target cpu disables interrupts in stop machine. I doubt that it can happen, but at least there is a theroretical chance. Virtualization might be able to expose this, but AFAICT the IOAPIC emulation is not as stupid as the real hardware. I've spent quite some time over the weekend to enforce that situation, though I was not able to trigger the delayed case. 2) The move_in_progress flag is not set and the old_domain cpu mask is not empty. That means, that an interrupt was delivered after the change and the cleanup IPI has been sent to the cpus in old_domain, but not all CPUs have responded to it yet. In both cases we can assume that the next interrupt will arrive on the new vector, so we can cleanup the old vectors on the cpus in the old_domain cpu mask. Fixes: 98229aa36caa "x86/irq: Plug vector cleanup race" Reported-by: Harry Junior Tested-by: Tony Luck Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Joe Lawrence Cc: Borislav Petkov Cc: Ben Hutchings Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603140931430.3657@nanos Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/hw_irq.h | 1 arch/x86/kernel/apic/vector.c | 88 +++++++++++++++++++++++++++++++++--------- 2 files changed, 71 insertions(+), 18 deletions(-) --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -136,6 +136,7 @@ struct irq_alloc_info { struct irq_cfg { unsigned int dest_apicid; u8 vector; + u8 old_vector; }; extern struct irq_cfg *irq_cfg(unsigned int irq); --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -211,6 +211,7 @@ update: */ cpumask_and(d->old_domain, d->old_domain, cpu_online_mask); d->move_in_progress = !cpumask_empty(d->old_domain); + d->cfg.old_vector = d->move_in_progress ? d->cfg.vector : 0; d->cfg.vector = vector; cpumask_copy(d->domain, vector_cpumask); success: @@ -653,46 +654,97 @@ void irq_complete_move(struct irq_cfg *c } /* - * Called with @desc->lock held and interrupts disabled. + * Called from fixup_irqs() with @desc->lock held and interrupts disabled. */ void irq_force_complete_move(struct irq_desc *desc) { struct irq_data *irqdata = irq_desc_get_irq_data(desc); struct apic_chip_data *data = apic_chip_data(irqdata); struct irq_cfg *cfg = data ? &data->cfg : NULL; + unsigned int cpu; if (!cfg) return; - __irq_complete_move(cfg, cfg->vector); - /* * This is tricky. If the cleanup of @data->old_domain has not been * done yet, then the following setaffinity call will fail with * -EBUSY. This can leave the interrupt in a stale state. * - * The cleanup cannot make progress because we hold @desc->lock. So in - * case @data->old_domain is not yet cleaned up, we need to drop the - * lock and acquire it again. @desc cannot go away, because the - * hotplug code holds the sparse irq lock. + * All CPUs are stuck in stop machine with interrupts disabled so + * calling __irq_complete_move() would be completely pointless. */ raw_spin_lock(&vector_lock); - /* Clean out all offline cpus (including ourself) first. */ + /* + * Clean out all offline cpus (including the outgoing one) from the + * old_domain mask. + */ cpumask_and(data->old_domain, data->old_domain, cpu_online_mask); - while (!cpumask_empty(data->old_domain)) { + + /* + * If move_in_progress is cleared and the old_domain mask is empty, + * then there is nothing to cleanup. fixup_irqs() will take care of + * the stale vectors on the outgoing cpu. + */ + if (!data->move_in_progress && cpumask_empty(data->old_domain)) { raw_spin_unlock(&vector_lock); - raw_spin_unlock(&desc->lock); - cpu_relax(); - raw_spin_lock(&desc->lock); + return; + } + + /* + * 1) The interrupt is in move_in_progress state. That means that we + * have not seen an interrupt since the io_apic was reprogrammed to + * the new vector. + * + * 2) The interrupt has fired on the new vector, but the cleanup IPIs + * have not been processed yet. + */ + if (data->move_in_progress) { /* - * Reevaluate apic_chip_data. It might have been cleared after - * we dropped @desc->lock. + * In theory there is a race: + * + * set_ioapic(new_vector) <-- Interrupt is raised before update + * is effective, i.e. it's raised on + * the old vector. + * + * So if the target cpu cannot handle that interrupt before + * the old vector is cleaned up, we get a spurious interrupt + * and in the worst case the ioapic irq line becomes stale. + * + * But in case of cpu hotplug this should be a non issue + * because if the affinity update happens right before all + * cpus rendevouz in stop machine, there is no way that the + * interrupt can be blocked on the target cpu because all cpus + * loops first with interrupts enabled in stop machine, so the + * old vector is not yet cleaned up when the interrupt fires. + * + * So the only way to run into this issue is if the delivery + * of the interrupt on the apic/system bus would be delayed + * beyond the point where the target cpu disables interrupts + * in stop machine. I doubt that it can happen, but at least + * there is a theroretical chance. Virtualization might be + * able to expose this, but AFAICT the IOAPIC emulation is not + * as stupid as the real hardware. + * + * Anyway, there is nothing we can do about that at this point + * w/o refactoring the whole fixup_irq() business completely. + * We print at least the irq number and the old vector number, + * so we have the necessary information when a problem in that + * area arises. */ - data = apic_chip_data(irqdata); - if (!data) - return; - raw_spin_lock(&vector_lock); + pr_warn("IRQ fixup: irq %d move in progress, old vector %d\n", + irqdata->irq, cfg->old_vector); } + /* + * If old_domain is not empty, then other cpus still have the irq + * descriptor set in their vector array. Clean it up. + */ + for_each_cpu(cpu, data->old_domain) + per_cpu(vector_irq, cpu)[cfg->old_vector] = VECTOR_UNUSED; + + /* Cleanup the left overs of the (half finished) move */ + cpumask_clear(data->old_domain); + data->move_in_progress = 0; raw_spin_unlock(&vector_lock); } #endif