Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 21 Mar 2003 02:10:21 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 21 Mar 2003 02:10:20 -0500 Received: from modemcable092.130-200-24.mtl.mc.videotron.ca ([24.200.130.92]:22808 "EHLO montezuma.mastecende.com") by vger.kernel.org with ESMTP id ; Fri, 21 Mar 2003 02:10:03 -0500 Date: Fri, 21 Mar 2003 02:17:56 -0500 (EST) From: Zwane Mwaikambo X-X-Sender: zwane@montezuma.mastecende.com To: Linux Kernel Subject: aic7(censored) dying horribly in 2.5.65-mm2 (fwd) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10591 Lines: 261 Hi Justin i got this booting 2.5.65-mm2, 2.5.65 was fine there is an oops right at the end. Is there anything specific you want? 01:0d.0 SCSI storage controller: Adaptec AHA-294x / AIC-7870 (rev 03) 01:0e.0 SCSI storage controller: Adaptec AHA-294x / AIC-7870 (rev 03) There are 6 spindles on that second HBA, and a DLT and CDROM on the first. CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_PROBE_EISA_VL is not set # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set Starting NFS statd: [ OK ] Loading keymap: scsi1:0:0:0: Attempting to queue an ABORT message >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi1: Dumping Card State while idle, at SEQADDR 0x8 Card was paused ACCUM = 0x55, SINDEX = 0xa, DINDEX = 0x8c, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x8 SCSISIGI[0xe6]:(REQI|BSYI|MSGI|IOI|CDI) ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x80] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x25]:(DMADONE|SDONE|SELDI) SSTAT1[0xb]:(REQINIT|PHASECHG|BUSFREE) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x29]:(FIFOEMP|HDONE|FIFOQWDEMP) STACK: 0x0 0x169 0x10c 0x3 SCB count = 56 Kernel NEXTQSCB = 8 Card NEXTQSCB = 8 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 0:13 QOUTFIFO entries: Sequencer Free SCB List: 8 3 2 9 13 5 6 4 14 7 1 11 12 10 15 Sequencer SCB Info: 0 SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xd] 1 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 4 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 9 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 12 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] Pending list: 13 SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] SCB_LUN[0x0] Kernel Free SCB list: 10 11 0 25 41 28 31 40 45 29 30 46 47 24 26 5 20 21 42 43 27 23 22 49 50 36 37 3 48 4 1 7 18 44 35 DevQ(0:0:0): 0 waiting DevQ(0:1:0): 0 waiting DevQ(0:2:0): 0 waiting DevQ(0:3:0): 0 waiting DevQ(0:4:0): 0 waiting DevQ(0:5:0): 0 waiting <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> (scsi1:A:0:0): Device is disconnected, re-queuing SCB Recovery code sleeping (scsi1:A:0:0): Abort Tag Message Sent (scsi1:A:0:0): SCB 13 - Abort Tag Completed. Recovery SCB completes Recovery code awake aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message scsi1:0:0:0: Command not found aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message scsi1:0:0:0: Command not found aic7xxx_abort returns 0x2002 [ OK ] Loading system font: scsi1:0:0:0: Attempting to queue an ABORT message scsi1:0:0:0: Command not found aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message scsi1:0:0:0: Command not found aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message scsi1:0:0:0: Command not found aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue a TARGET RESET message scsi1:0:0:0: Command not found aic7xxx_dev_reset returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message scsi1:0:0:0: Command not found aic7xxx_abort returns 0x2002 scsi1:0:0:0: Attempting to queue an ABORT message >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi1: Dumping Card State while idle, at SEQADDR 0x8 Card was paused ACCUM = 0xea, SINDEX = 0x64, DINDEX = 0x65, ARG_2 = 0xa HCNT = 0x0 SCBPTR = 0x4 SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0xa]:(PHASECHG|BUSFREE) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP) STACK: 0xe4 0x169 0x199 0x3 SCB count = 56 Kernel NEXTQSCB = 8 Card NEXTQSCB = 8 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 4:43 QOUTFIFO entries: Sequencer Free SCB List: 0 2 12 11 14 7 1 15 10 3 9 13 6 5 8 Sequencer SCB Info: 0 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 1 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 4 SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0x2b] 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 9 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 12 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff] Pending list: 43 SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] SCB_LUN[0x0] Kernel Free SCB list: 31 44 46 30 40 45 29 3 24 23 37 47 20 21 5 42 27 26 50 22 49 36 1 4 48 18 11 10 7 0 25 28 41 13 35 DevQ(0:0:0): 0 waiting DevQ(0:1:0): 0 waiting DevQ(0:2:0): 0 waiting DevQ(0:3:0): 0 waiting DevQ(0:4:0): 0 waiting DevQ(0:5:0): 0 waiting <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> (scsi1:A:0:0): Device is disconnected, re-queuing SCB (scsi1:A:0:0): Recovery code sleeping Abort Tag Message Sent Recovery code awake Timer Expired aic7xxx_abort returns 0x2003 SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 6000000 end_request: I/O error, dev sda, sector 133984 Buffer I/O error on device sd(8,1), logical block 16744 SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 6000000 end_request: I/O error, dev sda, sector 4980800 Buffer I/O error on device sd(8,1), logical block 622596 Debug: sleeping function called from illegal context at include/linux/rwsem.h:43 Call Trace: [] __might_sleep+0x58/0x60 [] __bdevname+0x50/0xc0 [] buffer_io_error+0x11/0x30 [] end_buffer_async_write+0x166/0x190 [] end_bio_bh_io_sync+0x21/0x30 [] bio_endio+0x35/0x60 [] __end_that_request_first+0x1ff/0x220 [] end_that_request_first+0x17/0x20 [] elv_next_request+0x84/0xe0 [] scsi_request_fn+0x3f/0x2a0 [] __blk_run_queue+0x12/0x20 [] scsi_restart_operations+0xbd/0x120 [] scsi_error_handler+0x138/0x1a0 [] scsi_error_handler+0x0/0x1a0 [] kernel_thread_helper+0x5/0x10 Buffer I/O error on device sd(8,1), logical block 557066 (scsi1:A:0:0): SCB 43 - Abort Tag Completed. Recovery SCB completes Unable to handle kernel paging request at virtual address 6b6b6b6b printing eip: 6b6b6b6b *pde = 00000000 Oops: 0000 [#1] CPU: 1 EIP: 0060:[<6b6b6b6b>] Not tainted EFLAGS: 00010002 VLI EIP is at 0x6b6b6b6b eax: cbb1ccf8 ebx: 00000000 ecx: cbe31290 edx: 00000000 esi: 00000001 edi: c1509f20 ebp: 00000005 esp: c1509ea0 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=c1508000 task=c150a660) Stack: c02ff78c cbb1ccf8 cbb1ccf8 cbe31290 c0305c07 cbe31290 cbb1ccf8 00000292 3e7ac717 c17e848c cbffe4f4 04000001 c010bb0d 00000005 cbe31290 c1509f20 c05060a0 c1508000 c1508000 00000005 c010be49 00000005 c1509f20 cbffe4f4 Call Trace: [] ahc_linux_run_complete_queue+0x3c/0x50 [] ahc_linux_isr+0x1d7/0x3a0 [] handle_IRQ_event+0x2d/0x50 [] do_IRQ+0x109/0x210 [] common_interrupt+0x18/0x20 [] do_softirq+0x56/0xc0 [] smp_apic_timer_interrupt+0xf5/0x160 [] default_idle+0x0/0x40 [] apic_timer_interrupt+0x1a/0x20 [] default_idle+0x0/0x40 [] default_idle+0x2e/0x40 [] cpu_idle+0x3a/0x50 [] release_console_sem+0xbd/0x170 [] printk+0x1eb/0x270 Code: Bad EIP value. <0>Kernel panic: Aiee, killing interrupt handler! In interrupt handler - not syncing - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/