Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752758AbcDJXo0 (ORCPT ); Sun, 10 Apr 2016 19:44:26 -0400 Received: from pygmy.kinoho.net ([134.0.27.24]:44154 "EHLO pygmy.kinoho.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751243AbcDJXoL (ORCPT ); Sun, 10 Apr 2016 19:44:11 -0400 From: Grigori Goronzy To: Johan Hovold Cc: Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Grigori Goronzy Subject: [PATCH v3 06/13] USB: ch341: add support for parity, frame length, stop bits Date: Mon, 11 Apr 2016 01:43:46 +0200 Message-Id: <1460331833-19836-7-git-send-email-greg@chown.ath.cx> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1460331833-19836-1-git-send-email-greg@chown.ath.cx> References: <1460331833-19836-1-git-send-email-greg@chown.ath.cx> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2442 Lines: 84 With the new reinitialization method, configuring parity, different frame lengths and different stop bit settings work as expected on both CH340G and CH341A. This has been extensively tested with a logic analyzer. v2: only set mark/space when parity is enabled, simplifications, patch termios HW flags. Tested-by: Ryan Barber Signed-off-by: Grigori Goronzy --- drivers/usb/serial/ch341.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 6181616..99b4621 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -341,7 +341,6 @@ static void ch341_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct ch341_private *priv = usb_get_serial_port_data(port); - unsigned baud_rate; unsigned long flags; unsigned char ctrl; int r; @@ -350,13 +349,39 @@ static void ch341_set_termios(struct tty_struct *tty, if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; - baud_rate = tty_get_baud_rate(tty); + priv->baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; + ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX; - ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX | CH341_LCR_CS8; + switch (C_CSIZE(tty)) { + case CS5: + ctrl |= CH341_LCR_CS5; + break; + case CS6: + ctrl |= CH341_LCR_CS6; + break; + case CS7: + ctrl |= CH341_LCR_CS7; + break; + default: + tty->termios.c_cflag |= CS8; + case CS8: + ctrl |= CH341_LCR_CS8; + break; + } + + if (C_PARENB(tty)) { + ctrl |= CH341_LCR_ENABLE_PAR; + if (C_PARODD(tty)) + ctrl |= CH341_LCR_PAR_EVEN; + if (C_CMSPAR(tty)) + ctrl |= CH341_LCR_MARK_SPACE; + } + + if (C_CSTOPB(tty)) + ctrl |= CH341_LCR_STOP_BITS_2; - if (baud_rate) { + if (priv->baud_rate) { spin_lock_irqsave(&priv->lock, flags); priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); spin_unlock_irqrestore(&priv->lock, flags); @@ -373,11 +398,6 @@ static void ch341_set_termios(struct tty_struct *tty, ch341_set_handshake(port->serial->dev, priv->line_control); - /* Unimplemented: - * (cflag & CSIZE) : data bits [5, 8] - * (cflag & PARENB) : parity {NONE, EVEN, ODD} - * (cflag & CSTOPB) : stop bits [1, 2] - */ } static void ch341_break_ctl(struct tty_struct *tty, int break_state) -- 1.9.1