Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754721AbcDKLzp (ORCPT ); Mon, 11 Apr 2016 07:55:45 -0400 Received: from LGEAMRELO12.lge.com ([156.147.23.52]:35260 "EHLO lgeamrelo12.lge.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751085AbcDKLyv (ORCPT ); Mon, 11 Apr 2016 07:54:51 -0400 X-Original-SENDERIP: 156.147.1.151 X-Original-MAILFROM: chanho.min@lge.com X-Original-SENDERIP: 165.244.98.204 X-Original-MAILFROM: chanho.min@lge.com X-Original-SENDERIP: 165.186.175.97 X-Original-MAILFROM: chanho.min@lge.com From: Chanho Min To: CC: Catalin Marinas , Arnd Bergmann , Will Deacon , Mark Rutland , , , Jongsung Kim , Gunho Lee , Chanho Min Subject: [PATCH v3 3/4] arm64: dts: Add dts files for LG Electronics's lg1312 SoC Date: Mon, 11 Apr 2016 20:54:46 +0900 Message-ID: <1460375687-2375-4-git-send-email-chanho.min@lge.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1460375687-2375-1-git-send-email-chanho.min@lge.com> References: <1460375687-2375-1-git-send-email-chanho.min@lge.com> X-MIMETrack: Itemize by SMTP Server on LGEKRMHUB03/LGE/LG Group(Release 8.5.3FP6|November 21, 2013) at 2016/04/11 20:54:48, Serialize by Router on LGEKRMHUB03/LGE/LG Group(Release 8.5.3FP6|November 21, 2013) at 2016/04/11 20:54:48, Serialize complete at 2016/04/11 20:54:48 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11704 Lines: 454 Add initial dtsi file to support lg1312 SoC which based on Cortex-A53. Also add dts file to support lg1312 reference board which based on lg1312 SoC. Signed-off-by: Chanho Min --- Changes for v2: - remove self-defined macro. - change root node's #size-cells to <2>. - remove bootargs property. - update psci support to the arm,psci-0.2. - put fixed-clock property under the root node. - add stdout-path property. - update the GICC reg length to 0x2000 - add the GICH and GICV interface. - change pmu compatible property to arm,coretex-a53-pmu. - remove clock-frequency property from timer. Changes for v3: - change the order of arm,psci-0.2 and arm,psci --- arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/lg/Makefile | 5 + arch/arm64/boot/dts/lg/lg1312-ref.dts | 36 ++++ arch/arm64/boot/dts/lg/lg1312.dtsi | 351 +++++++++++++++++++++++++++++++++ 4 files changed, 393 insertions(+) create mode 100644 arch/arm64/boot/dts/lg/Makefile create mode 100644 arch/arm64/boot/dts/lg/lg1312-ref.dts create mode 100644 arch/arm64/boot/dts/lg/lg1312.dtsi diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index f832b8a..90ce525 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -16,6 +16,7 @@ dts-dirs += rockchip dts-dirs += socionext dts-dirs += sprd dts-dirs += xilinx +dts-dirs += lg subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/lg/Makefile b/arch/arm64/boot/dts/lg/Makefile new file mode 100644 index 0000000..b0cc649 --- /dev/null +++ b/arch/arm64/boot/dts/lg/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/lg/lg1312-ref.dts b/arch/arm64/boot/dts/lg/lg1312-ref.dts new file mode 100644 index 0000000..6d78d6b --- /dev/null +++ b/arch/arm64/boot/dts/lg/lg1312-ref.dts @@ -0,0 +1,36 @@ +/* + * dts file for lg1312 Reference Board. + * + * Copyright (C) 2016, LG Electronics + */ + +/dts-v1/; + +#include "lg1312.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <1>; + + model = "LG Electronics, DTV SoC LG1312 Reference Board"; + compatible = "lge,lg1312-ref", "lge,lg1312"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x20000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi new file mode 100644 index 0000000..3a4e9a2 --- /dev/null +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -0,0 +1,351 @@ +/* + * dts file for lg1312 SoC + * + * Copyright (C) 2016, LG Electronics + */ + +#include +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + compatible = "lge,lg1312"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + gic: interrupt-controller@c0001000 { + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + interrupt-controller; + reg = <0x0 0xc0001000 0x1000>, + <0x0 0xc0002000 0x2000>, + <0x0 0xc0004000 0x2000>, + <0x0 0xc0006000 0x2000>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + clk_bus: clk_bus { + #clock-cells = <0>; + + compatible = "fixed-clock"; + clock-frequency = <198000000>; + clock-output-names = "BUSCLK"; + }; + + soc { + #address-cells = <2>; + #size-cells = <1>; + + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + eth0: ethernet@c1b00000 { + compatible = "cdns,gem"; + reg = <0x0 0xc1b00000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "hclk", "pclk"; + phy-mode = "rmii"; + /* Filled in by boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + amba { + #address-cells = <2>; + #size-cells = <1>; + #interrupts-cells = <3>; + + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + timers: timer@fd100000 { + compatible = "arm,sp804"; + reg = <0x0 0xfd100000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + wdog: watchdog@fd200000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xfd200000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + uart0: serial@fe000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe000000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + uart1: serial@fe100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe100000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + uart2: serial@fe200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe200000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + spi0: ssp@fe800000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe800000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + spi1: ssp@fe900000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe900000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + dmac0: dma@c1128000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xc1128000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio0: gpio@fd400000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd400000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio1: gpio@fd410000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd410000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio2: gpio@fd420000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd420000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio3: gpio@fd430000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd430000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio4: gpio@fd440000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd440000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio5: gpio@fd450000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd450000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio6: gpio@fd460000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd460000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio7: gpio@fd470000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd470000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio8: gpio@fd480000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd480000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio9: gpio@fd490000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd490000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio10: gpio@fd4a0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4a0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio11: gpio@fd4b0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4b0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio12: gpio@fd4c0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4c0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio13: gpio@fd4d0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4d0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio14: gpio@fd4e0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4e0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio15: gpio@fd4f0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4f0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio16: gpio@fd500000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd500000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status="disabled"; + }; + gpio17: gpio@fd510000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd510000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + }; +}; -- 1.7.9.5