Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756691AbcDLJfH (ORCPT ); Tue, 12 Apr 2016 05:35:07 -0400 Received: from mail-wm0-f44.google.com ([74.125.82.44]:36750 "EHLO mail-wm0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756633AbcDLJez (ORCPT ); Tue, 12 Apr 2016 05:34:55 -0400 From: Srinivas Kandagatla To: Andy Gross , linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org, srinivas.kandagatla@linaro.org Subject: [PATCH v2 10/13] ARM: dts: db600c: Add on board leds support Date: Tue, 12 Apr 2016 10:33:59 +0100 Message-Id: <1460453642-5809-11-git-send-email-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org> References: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2411 Lines: 100 This patch adds support to 4 user leds, wlan and bt led on board. Signed-off-by: Srinivas Kandagatla --- .../boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi | 23 +++++++++++ arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 47 ++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi index 0610f00..3b55bb9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi @@ -18,4 +18,27 @@ bias-disable; }; }; + + user_leds: user-leds { + mux { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + }; + + conf { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + output-low; + }; + }; +}; + +&pm8921_mpps { + mpp_leds: mpp-leds { + pinconf { + pins = "mpp7", "mpp8"; + function = "digital"; + output-low; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts index 6f97ddc..8c18a4b 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts @@ -153,6 +153,53 @@ }; }; + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>, <&mpp_leds>; + + compatible = "gpio-leds"; + + user-led0 { + label = "user0-led"; + gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + user-led1 { + label = "user1-led"; + gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + user-led2 { + label = "user2-led"; + gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led3 { + label = "user3-led"; + gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + wifi-led { + label = "WiFi-led"; + gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + bt-led { + label = "BT-led"; + gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + pci@1b500000 { status = "okay"; vdda-supply = <&pm8921_s3>; -- 2.5.0