Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756718AbcDLJg3 (ORCPT ); Tue, 12 Apr 2016 05:36:29 -0400 Received: from mail-wm0-f44.google.com ([74.125.82.44]:37863 "EHLO mail-wm0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756604AbcDLJev (ORCPT ); Tue, 12 Apr 2016 05:34:51 -0400 From: Srinivas Kandagatla To: Andy Gross , linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org, srinivas.kandagatla@linaro.org Subject: [PATCH v2 11/13] ARM: dts: db600c: add i2c support Date: Tue, 12 Apr 2016 10:34:00 +0100 Message-Id: <1460453642-5809-12-git-send-email-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org> References: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1798 Lines: 81 This patch adds nodes required to enable 4 i2c buses on the board which are connected to various sensors and eeprom. Signed-off-by: Srinivas Kandagatla --- arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 46 +++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts index 8c18a4b..2f0dfff 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts @@ -9,6 +9,10 @@ aliases { serial0 = &gsbi7_serial; serial1 = &gsbi1_serial; + i2c0 = &gsbi2_i2c; + i2c1 = &gsbi3_i2c; + i2c2 = &gsbi4_i2c; + i2c3 = &gsbi7_i2c; }; regulators { @@ -141,6 +145,42 @@ }; }; + gsbi@12480000 { + status = "okay"; + qcom,mode = ; + i2c@124a0000 { + /* On Low speed expansion and Sensors */ + label = "LS-I2C0"; + status = "okay"; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = ; + i2c@16280000 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; + clock-frequency = <200000>; + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <64>; + }; + }; + }; + + gsbi@16300000 { + status = "okay"; + qcom,mode = ; + i2c@16380000 { + /* On High speed expansion */ + label = "HS-CAM-I2C3"; + status = "okay"; + }; + }; + /* DEBUG UART */ gsbi@16600000 { status = "okay"; @@ -151,6 +191,12 @@ pinctrl-names = "default"; pinctrl-0 = <&gsbi7_uart_2pins>; }; + + i2c@16680000 { + /* On High speed expansion */ + status = "okay"; + label = "HS-CAM-I2C2"; + }; }; leds { -- 2.5.0