Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756532AbcDLJef (ORCPT ); Tue, 12 Apr 2016 05:34:35 -0400 Received: from mail-wm0-f50.google.com ([74.125.82.50]:37491 "EHLO mail-wm0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756483AbcDLJea (ORCPT ); Tue, 12 Apr 2016 05:34:30 -0400 From: Srinivas Kandagatla To: Andy Gross , linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org, srinivas.kandagatla@linaro.org Subject: [PATCH v2 02/13] ARM: dts: apq8064: add support to gsbi1 uart Date: Tue, 12 Apr 2016 10:33:51 +0100 Message-Id: <1460453642-5809-3-git-send-email-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org> References: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1538 Lines: 56 This patch adds support to gsbi1 uart and its pinctrls nodes. Signed-off-by: Srinivas Kandagatla --- arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 10 ++++++++++ 2 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index b57c59d..8bb5e5f 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -39,6 +39,20 @@ }; }; + gsbi1_uart_2pins: gsbi1_uart_2pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi1"; + }; + }; + + gsbi1_uart_4pins: gsbi1_uart_4pins { + mux { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + i2c2_pins: i2c2 { mux { pins = "gpio24", "gpio25"; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index c6ff8fc..81b4290 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -225,6 +225,16 @@ syscon-tcsr = <&tcsr>; + gsbi1_serial: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 0x0>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; pinctrl-0 = <&i2c1_pins>; -- 2.5.0