Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964870AbcDLMdU (ORCPT ); Tue, 12 Apr 2016 08:33:20 -0400 Received: from mail-wm0-f68.google.com ([74.125.82.68]:33587 "EHLO mail-wm0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933825AbcDLMdQ (ORCPT ); Tue, 12 Apr 2016 08:33:16 -0400 From: Tomeu Vizoso To: linux-kernel@vger.kernel.org Cc: Sameer Nanda , Javier Martinez Canillas , Lee Jones , Benson Leung , =?UTF-8?q?Enric=20Balletb=C3=B2?= , Vic Yang , Stephen Boyd , Vincent Palatin , Randall Spangler , Todd Broch , Gwendal Grignou , Tomeu Vizoso , Shawn Nematbakhsh , Sebastian Reichel , Dmitry Eremin-Solenikov , linux-pm@vger.kernel.org, David Woodhouse Subject: [PATCH v8 6/7] power: cros_usbpd-charger: Add EC-based USB PD charger driver Date: Tue, 12 Apr 2016 14:32:29 +0200 Message-Id: <1460464350-30414-7-git-send-email-tomeu.vizoso@collabora.com> X-Mailer: git-send-email 2.5.5 In-Reply-To: <1460464350-30414-1-git-send-email-tomeu.vizoso@collabora.com> References: <1460464350-30414-1-git-send-email-tomeu.vizoso@collabora.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24867 Lines: 858 From: Sameer Nanda This driver exposes the charger functionality in the PD EC to userspace. Signed-off-by: Tomeu Vizoso Cc: Sameer Nanda Cc: Benson Leung Cc: Shawn Nematbakhsh --- Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: - Fix type of variable passed to do_div. Changes in v4: - Declare size parameters in ec_command as size_t Changes in v3: - Use do_div so it builds on 32bit (suggested by 0-day kbuild bot). - Remove sysfs attributes ext_current_lim and ext_voltage_lim because I don't know yet where they should be placed (and don't have HW to test them). - Remove superfluous pre-allocated buffers ec_inbuf and ec_outbuf. - Lots of misc comments from Stephen Boyd were addressed. - Unregister notification listener in .remove callback. Changes in v2: - Split out changes to cros_ec_commands.h and the helpers added to mfd/cros_ec.h from the patch that adds the charger driver, as suggested by Lee. - Actually call get_ec_num_ports. drivers/power/Kconfig | 10 + drivers/power/Makefile | 1 + drivers/power/cros_usbpd-charger.c | 780 +++++++++++++++++++++++++++++++++++++ 3 files changed, 791 insertions(+) create mode 100644 drivers/power/cros_usbpd-charger.c diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 421770ddafa3..d096e76ed822 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -509,6 +509,16 @@ config AXP20X_POWER This driver provides support for the power supply features of AXP20x PMIC. +config CHARGER_CROS_USB_PD + tristate "Chrome OS EC based USB PD charger" + depends on MFD_CROS_EC + default y + help + Say Y here to enable Chrome OS EC based USB PD charger driver. This + driver gets various bits of information about what is connected to + USB PD ports from the EC and converts that into power_supply + properties. + endif # POWER_SUPPLY source "drivers/power/reset/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index e46b75d448a5..c9eca1f9bfb0 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -74,3 +74,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o obj-$(CONFIG_POWER_RESET) += reset/ obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o +obj-$(CONFIG_CHARGER_CROS_USB_PD) += cros_usbpd-charger.o diff --git a/drivers/power/cros_usbpd-charger.c b/drivers/power/cros_usbpd-charger.c new file mode 100644 index 000000000000..e7366660c093 --- /dev/null +++ b/drivers/power/cros_usbpd-charger.c @@ -0,0 +1,780 @@ +/* + * Power supply driver for ChromeOS EC based USB PD Charger. + * + * Copyright (c) 2014 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CROS_USB_PD_MAX_PORTS 8 +#define CROS_USB_PD_MAX_LOG_ENTRIES 30 + +#define CROS_USB_PD_LOG_UPDATE_DELAY msecs_to_jiffies(60000) +#define CROS_USB_PD_CACHE_UPDATE_DELAY msecs_to_jiffies(500) + +/* Buffer + macro for building PDLOG string */ +#define BUF_SIZE 80 +#define APPEND_STRING(buf, len, str, ...) ((len) += \ + snprintf((buf) + (len), max(BUF_SIZE - (len), 0), (str), ##__VA_ARGS__)) + +#define CHARGER_DIR_NAME "CROS_USB_PD_CHARGER%d" +#define CHARGER_DIR_NAME_LENGTH sizeof(CHARGER_DIR_NAME) + +#define MANUFACTURER_MODEL_LENGTH 32 + +struct port_data { + int port_number; + char name[CHARGER_DIR_NAME_LENGTH]; + char manufacturer[MANUFACTURER_MODEL_LENGTH]; + char model_name[MANUFACTURER_MODEL_LENGTH]; + struct power_supply *psy; + struct power_supply_desc psy_desc; + int psy_type; + int psy_online; + int psy_status; + int psy_current_max; + int psy_voltage_max_design; + int psy_voltage_now; + int psy_power_max; + struct charger_data *charger; + unsigned long last_update; +}; + +struct charger_data { + struct device *dev; + struct cros_ec_dev *ec_dev; + struct cros_ec_device *ec_device; + int num_charger_ports; + int num_registered_psy; + struct port_data *ports[CROS_USB_PD_MAX_PORTS]; + struct delayed_work log_work; + struct workqueue_struct *log_workqueue; + struct notifier_block notifier; + bool suspended; +}; + +static enum power_supply_property cros_usb_pd_charger_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static int ec_command(struct cros_ec_dev *ec_dev, int version, int command, + uint8_t *outdata, size_t outsize, uint8_t *indata, + size_t insize) +{ + struct cros_ec_device *ec_device = ec_dev->ec_dev; + struct cros_ec_command *msg; + int ret; + + msg = kmalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->version = version; + msg->command = ec_dev->cmd_offset + command; + msg->outsize = outsize; + msg->insize = insize; + + memcpy(msg->data, outdata, outsize); + ret = cros_ec_cmd_xfer_status(ec_device, msg); + memcpy(indata, msg->data, insize); + + kfree(msg); + + return ret; +} + +static int set_ec_usb_pd_override_ports(struct charger_data *charger, + int port_num) +{ + struct device *dev = charger->dev; + struct ec_params_charge_port_override req; + int ret; + + req.override_port = port_num; + + ret = ec_command(charger->ec_dev, 0, EC_CMD_PD_CHARGE_PORT_OVERRIDE, + (uint8_t *)&req, sizeof(req), + NULL, 0); + if (ret < 0) { + dev_err(dev, "Port Override command returned 0x%x\n", ret); + return -EINVAL; + } + + return 0; +} + +static int get_ec_num_ports(struct charger_data *charger, int *num_ports) +{ + struct device *dev = charger->dev; + struct ec_response_usb_pd_ports resp; + int ret; + + *num_ports = 0; + ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_PORTS, NULL, 0, + (uint8_t *)&resp, sizeof(resp)); + if (ret < 0) { + dev_err(dev, "Unable to query PD ports (err:0x%x)\n", ret); + return ret; + } + *num_ports = resp.num_ports; + dev_dbg(dev, "Num ports = %d\n", *num_ports); + + return 0; +} + +static int get_ec_usb_pd_discovery_info(struct port_data *port) +{ + struct charger_data *charger = port->charger; + struct device *dev = charger->dev; + struct ec_params_usb_pd_info_request req; + struct ec_params_usb_pd_discovery_entry resp; + int ret; + + req.port = port->port_number; + + ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_DISCOVERY, + (uint8_t *)&req, sizeof(req), + (uint8_t *)&resp, sizeof(resp)); + if (ret < 0) { + dev_err(dev, "Unable to query Discovery info (err:0x%x)\n", + ret); + return -EINVAL; + } + + dev_dbg(dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n", + port->port_number, resp.vid, resp.pid, resp.ptype); + + snprintf(port->manufacturer, MANUFACTURER_MODEL_LENGTH, "%x", resp.vid); + snprintf(port->model_name, MANUFACTURER_MODEL_LENGTH, "%x", resp.pid); + + return 0; +} + +static int get_ec_usb_pd_power_info(struct port_data *port) +{ + struct charger_data *charger = port->charger; + struct device *dev = charger->dev; + struct ec_params_usb_pd_power_info req; + struct ec_response_usb_pd_power_info resp; + char role_str[80]; + int ret, last_psy_status, last_psy_type; + + req.port = port->port_number; + ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_POWER_INFO, + (uint8_t *)&req, sizeof(req), + (uint8_t *)&resp, sizeof(resp)); + if (ret < 0) { + dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret); + return -EINVAL; + } + + last_psy_status = port->psy_status; + last_psy_type = port->psy_type; + + switch (resp.role) { + case USB_PD_PORT_POWER_DISCONNECTED: + snprintf(role_str, sizeof(role_str), "%s", "DISCONNECTED"); + port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + port->psy_online = 0; + break; + case USB_PD_PORT_POWER_SOURCE: + snprintf(role_str, sizeof(role_str), "%s", "SOURCE"); + port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + port->psy_online = 0; + break; + case USB_PD_PORT_POWER_SINK: + snprintf(role_str, sizeof(role_str), "%s", "SINK"); + port->psy_status = POWER_SUPPLY_STATUS_CHARGING; + port->psy_online = 1; + break; + case USB_PD_PORT_POWER_SINK_NOT_CHARGING: + snprintf(role_str, sizeof(role_str), "%s", "NOT CHARGING"); + port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + port->psy_online = 1; + break; + default: + snprintf(role_str, sizeof(role_str), "%s", "UNKNOWN"); + dev_err(dev, "Unknown role %d\n", resp.role); + break; + } + + port->psy_voltage_max_design = resp.meas.voltage_max; + port->psy_voltage_now = resp.meas.voltage_now; + port->psy_current_max = resp.meas.current_max; + port->psy_power_max = resp.max_power; + + switch (resp.type) { + case USB_CHG_TYPE_BC12_SDP: + case USB_CHG_TYPE_VBUS: + port->psy_type = POWER_SUPPLY_TYPE_USB; + break; + case USB_CHG_TYPE_NONE: + /* + * For dual-role devices when we are a source, the firmware + * reports the type as NONE. Report such chargers as type + * USB_PD_DRP. + */ + if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole) + port->psy_type = POWER_SUPPLY_TYPE_USB_PD_DRP; + else + port->psy_type = POWER_SUPPLY_TYPE_USB; + break; + case USB_CHG_TYPE_PROPRIETARY: + port->psy_type = POWER_SUPPLY_TYPE_MAINS; + break; + case USB_CHG_TYPE_C: + port->psy_type = POWER_SUPPLY_TYPE_USB_TYPE_C; + break; + case USB_CHG_TYPE_BC12_DCP: + port->psy_type = POWER_SUPPLY_TYPE_USB_DCP; + break; + case USB_CHG_TYPE_BC12_CDP: + port->psy_type = POWER_SUPPLY_TYPE_USB_CDP; + break; + case USB_CHG_TYPE_PD: + if (resp.dualrole) + port->psy_type = POWER_SUPPLY_TYPE_USB_PD_DRP; + else + port->psy_type = POWER_SUPPLY_TYPE_USB_PD; + break; + case USB_CHG_TYPE_UNKNOWN: + /* + * While the EC is trying to determine the type of charger that + * has been plugged in, it will report the charger type as + * unknown. Treat this case as a dedicated charger since we + * don't know any better just yet. Additionally since the power + * capabilities are unknown, report the max current and voltage + * as zero. + */ + port->psy_type = POWER_SUPPLY_TYPE_MAINS; + port->psy_voltage_max_design = 0; + port->psy_current_max = 0; + break; + default: + dev_err(dev, "Port %d: default case!\n", + port->port_number); + port->psy_type = POWER_SUPPLY_TYPE_USB; + } + + port->psy_desc.type = port->psy_type; + + dev_dbg(dev, + "Port %d: %s type=%d=vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n", + port->port_number, role_str, resp.type, + resp.meas.voltage_max, resp.meas.voltage_now, + resp.meas.current_max, resp.meas.current_lim, + resp.max_power); + + /* + * If power supply type or status changed, explicitly call + * power_supply_changed. This results in udev event getting generated + * and allows user mode apps to react quicker instead of waiting for + * their next poll of power supply status. + */ + if (last_psy_type != port->psy_type || + last_psy_status != port->psy_status) { + dev_dbg(dev, "Port %d: Calling power_supply_changed\n", + port->port_number); + power_supply_changed(port->psy); + } + + return 0; +} + +static int get_ec_port_status(struct port_data *port, bool ratelimit) +{ + int ret; + + if (ratelimit && + time_is_after_jiffies(port->last_update + + CROS_USB_PD_CACHE_UPDATE_DELAY)) + return 0; + + ret = get_ec_usb_pd_power_info(port); + if (ret < 0) + return ret; + + ret = get_ec_usb_pd_discovery_info(port); + port->last_update = jiffies; + + return ret; +} + +static void cros_usb_pd_charger_power_changed(struct power_supply *psy) +{ + struct port_data *port = power_supply_get_drvdata(psy); + struct charger_data *charger = port->charger; + struct device *dev = charger->dev; + int i; + + dev_dbg(dev, "cros_usb_pd_charger_power_changed\n"); + for (i = 0; i < charger->num_registered_psy; i++) + get_ec_port_status(charger->ports[i], false); +} + +static int cros_usb_pd_charger_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct port_data *port = power_supply_get_drvdata(psy); + struct charger_data *charger = port->charger; + struct device *dev = charger->dev; + int ret; + + + /* Only refresh ec_port_status for dynamic properties */ + switch (psp) { + case POWER_SUPPLY_PROP_CURRENT_MAX: + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: + ret = get_ec_port_status(port, true); + if (ret < 0) { + dev_err(dev, "Failed to get port status (err:0x%x)\n", + ret); + return -EINVAL; + } + break; + default: + break; + } + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = port->psy_online; + break; + case POWER_SUPPLY_PROP_STATUS: + val->intval = port->psy_status; + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + val->intval = port->psy_current_max * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = port->psy_voltage_max_design * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = port->psy_voltage_now * 1000; + break; + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: + /* TODO: send a TBD host command to the EC. */ + val->intval = 0; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = port->model_name; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = port->manufacturer; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int cros_usb_pd_charger_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct port_data *port = power_supply_get_drvdata(psy); + struct charger_data *charger = port->charger; + int port_number; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: + /* + * A value of -1 implies switching to battery as the power + * source. Any other value implies using this port as the + * power source. + */ + port_number = val->intval; + if (port_number != -1) + port_number = port->port_number; + return set_ec_usb_pd_override_ports(charger, port_number); + default: + return -EINVAL; + } + return 0; +} + +static int cros_usb_pd_charger_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: + ret = 1; + break; + default: + ret = 0; + } + + return ret; +} + +static void cros_usb_pd_print_log_entry(struct ec_response_pd_log *r, + ktime_t tstamp) +{ + static const char * const fault_names[] = { + "---", "OCP", "fast OCP", "OVP", "Discharge" + }; + static const char * const role_names[] = { + "Disconnected", "SRC", "SNK", "SNK (not charging)" + }; + static const char * const chg_type_names[] = { + "None", "PD", "Type-C", "Proprietary", + "DCP", "CDP", "SDP", "Other", "VBUS" + }; + int i; + int role_idx, type_idx; + const char *fault, *role, *chg_type; + struct usb_chg_measures *meas; + struct mcdp_info *minfo; + struct rtc_time rt; + u64 msecs; + int len = 0; + char buf[BUF_SIZE + 1]; + + /* the timestamp is the number of 1024th of seconds in the past */ + tstamp = ktime_sub_us(tstamp, + (uint64_t)r->timestamp_ms << PD_LOG_TIMESTAMP_SHIFT); + rt = rtc_ktime_to_tm(tstamp); + + switch (r->type) { + case PD_EVENT_MCU_CHARGE: + if (r->data & CHARGE_FLAGS_OVERRIDE) + APPEND_STRING(buf, len, "override "); + if (r->data & CHARGE_FLAGS_DELAYED_OVERRIDE) + APPEND_STRING(buf, len, "pending_override "); + role_idx = r->data & CHARGE_FLAGS_ROLE_MASK; + role = role_idx < ARRAY_SIZE(role_names) ? + role_names[role_idx] : "Unknown"; + type_idx = (r->data & CHARGE_FLAGS_TYPE_MASK) + >> CHARGE_FLAGS_TYPE_SHIFT; + chg_type = type_idx < ARRAY_SIZE(chg_type_names) ? + chg_type_names[type_idx] : "???"; + + if ((role_idx == USB_PD_PORT_POWER_DISCONNECTED) || + (role_idx == USB_PD_PORT_POWER_SOURCE)) { + APPEND_STRING(buf, len, "%s", role); + break; + } + + meas = (struct usb_chg_measures *)r->payload; + APPEND_STRING(buf, len, "%s %s %s %dmV max %dmV / %dmA", role, + r->data & CHARGE_FLAGS_DUAL_ROLE ? "DRP" : "Charger", + chg_type, + meas->voltage_now, + meas->voltage_max, + meas->current_max); + break; + case PD_EVENT_ACC_RW_FAIL: + APPEND_STRING(buf, len, "RW signature check failed"); + break; + case PD_EVENT_PS_FAULT: + fault = r->data < ARRAY_SIZE(fault_names) ? fault_names[r->data] + : "???"; + APPEND_STRING(buf, len, "Power supply fault: %s", fault); + break; + case PD_EVENT_VIDEO_DP_MODE: + APPEND_STRING(buf, len, "DP mode %sabled", + (r->data == 1) ? "en" : "dis"); + break; + case PD_EVENT_VIDEO_CODEC: + minfo = (struct mcdp_info *)r->payload; + APPEND_STRING(buf, len, + "HDMI info: family:%04x chipid:%04x irom:%d.%d.%d fw:%d.%d.%d", + MCDP_FAMILY(minfo->family), + MCDP_CHIPID(minfo->chipid), + minfo->irom.major, minfo->irom.minor, + minfo->irom.build, minfo->fw.major, + minfo->fw.minor, minfo->fw.build); + break; + default: + APPEND_STRING(buf, len, + "Event %02x (%04x) [", r->type, r->data); + for (i = 0; i < PD_LOG_SIZE(r->size_port); i++) + APPEND_STRING(buf, len, "%02x ", r->payload[i]); + APPEND_STRING(buf, len, "]"); + break; + } + + msecs = ktime_to_ms(tstamp); + do_div(msecs, MSEC_PER_SEC); + pr_info("PDLOG %d/%02d/%02d %02d:%02d:%02d.%03llu P%d %s\n", + rt.tm_year + 1900, rt.tm_mon + 1, rt.tm_mday, + rt.tm_hour, rt.tm_min, rt.tm_sec, msecs, + PD_LOG_PORT(r->size_port), buf); +} + +static void cros_usb_pd_log_check(struct work_struct *work) +{ + struct charger_data *charger = container_of(to_delayed_work(work), + struct charger_data, log_work); + struct device *dev = charger->dev; + union { + struct ec_response_pd_log r; + uint32_t words[8]; /* space for the payload */ + } u; + int ret; + int entries = 0; + ktime_t now; + + if (charger->suspended) { + dev_dbg(dev, "Suspended...bailing out\n"); + return; + } + + while (entries++ < CROS_USB_PD_MAX_LOG_ENTRIES) { + ret = ec_command(charger->ec_dev, 0, EC_CMD_PD_GET_LOG_ENTRY, + NULL, 0, (uint8_t *)&u, sizeof(u)); + now = ktime_get_real(); + if (ret < 0) { + dev_dbg(dev, "Cannot get PD log %d\n", ret); + break; + } + if (u.r.type == PD_EVENT_NO_ENTRY) + break; + + cros_usb_pd_print_log_entry(&u.r, now); + } + + queue_delayed_work(charger->log_workqueue, &charger->log_work, + CROS_USB_PD_LOG_UPDATE_DELAY); +} + +static int cros_usb_pd_ec_event(struct notifier_block *nb, + unsigned long queued_during_suspend, void *_notify) +{ + struct charger_data *charger; + struct device *dev; + struct cros_ec_device *ec_device; + u32 host_event; + + charger = container_of(nb, struct charger_data, notifier); + dev = charger->dev; + ec_device = charger->ec_device; + + host_event = cros_ec_get_host_event(ec_device); + if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) { + cros_usb_pd_charger_power_changed(charger->ports[0]->psy); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static char *charger_supplied_to[] = {"cros-usb_pd-charger"}; + +static int cros_usb_pd_charger_probe(struct platform_device *pd) +{ + struct device *dev = &pd->dev; + struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent); + struct cros_ec_device *ec_device; + struct charger_data *charger; + struct port_data *port; + struct power_supply_desc *psy_desc; + struct power_supply_config psy_cfg = {}; + int i; + int ret = -EINVAL; + + dev_dbg(dev, "cros_usb_pd_charger_probe\n"); + if (!ec_dev) { + WARN(1, "%s: No EC dev found\n", dev_name(dev)); + return -EINVAL; + } + + ec_device = ec_dev->ec_dev; + if (!ec_device) { + WARN(1, "%s: No EC device found\n", dev_name(dev)); + return -EINVAL; + } + + charger = devm_kzalloc(dev, sizeof(struct charger_data), + GFP_KERNEL); + if (!charger) + return -ENOMEM; + + charger->dev = dev; + charger->ec_dev = ec_dev; + charger->ec_device = ec_device; + + platform_set_drvdata(pd, charger); + + if ((get_ec_num_ports(charger, &charger->num_charger_ports) < 0) || + !charger->num_charger_ports) { + dev_err(dev, "No charging ports found\n"); + ret = -ENODEV; + goto fail; + } + + for (i = 0; i < charger->num_charger_ports; i++) { + port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL); + if (!port) { + ret = -ENOMEM; + goto fail; + } + + port->charger = charger; + port->port_number = i; + sprintf(port->name, CHARGER_DIR_NAME, i); + + psy_desc = &port->psy_desc; + psy_desc->name = port->name; + psy_desc->type = POWER_SUPPLY_TYPE_USB; + psy_desc->get_property = cros_usb_pd_charger_get_prop; + psy_desc->set_property = cros_usb_pd_charger_set_prop; + psy_desc->property_is_writeable = + cros_usb_pd_charger_is_writeable; + psy_desc->external_power_changed = + cros_usb_pd_charger_power_changed; + psy_desc->properties = cros_usb_pd_charger_props; + psy_desc->num_properties = ARRAY_SIZE( + cros_usb_pd_charger_props); + + psy_cfg.drv_data = port; + psy_cfg.supplied_to = charger_supplied_to; + psy_cfg.num_supplicants = ARRAY_SIZE(charger_supplied_to); + + port->psy = power_supply_register_no_ws(dev, psy_desc, + &psy_cfg); + if (IS_ERR(port->psy)) { + dev_err(dev, "Failed to register power supply: %ld\n", + PTR_ERR(port->psy)); + continue; + } + + charger->ports[charger->num_registered_psy++] = port; + } + + if (!charger->num_registered_psy) { + ret = -ENODEV; + dev_err(dev, "No power supplies registered\n"); + goto fail; + } + + if (ec_device->mkbp_event_supported) { + /* Get PD events from the EC */ + charger->notifier.notifier_call = cros_usb_pd_ec_event; + ret = blocking_notifier_chain_register( + &ec_device->event_notifier, &charger->notifier); + if (ret < 0) + dev_warn(dev, "failed to register notifier\n"); + } + + /* Retrieve PD event logs periodically */ + INIT_DELAYED_WORK(&charger->log_work, cros_usb_pd_log_check); + charger->log_workqueue = + create_singlethread_workqueue("cros_usb_pd_log"); + queue_delayed_work(charger->log_workqueue, &charger->log_work, + CROS_USB_PD_LOG_UPDATE_DELAY); + + return 0; + +fail: + for (i = 0; i < charger->num_registered_psy; i++) { + port = charger->ports[i]; + power_supply_unregister(port->psy); + devm_kfree(dev, port); + } + platform_set_drvdata(pd, NULL); + + return ret; +} + +static int cros_usb_pd_charger_remove(struct platform_device *pd) +{ + struct charger_data *charger = platform_get_drvdata(pd); + struct port_data *port; + int i; + + if (charger->notifier.notifier_call) + blocking_notifier_chain_unregister( + &charger->ec_device->event_notifier, + &charger->notifier); + + for (i = 0; i < charger->num_registered_psy; i++) { + port = charger->ports[i]; + power_supply_unregister(port->psy); + } + flush_delayed_work(&charger->log_work); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cros_usb_pd_charger_resume(struct device *dev) +{ + struct charger_data *charger = dev_get_drvdata(dev); + int i; + + if (!charger) + return 0; + + charger->suspended = false; + + dev_dbg(dev, "cros_usb_pd_charger_resume: updating power supplies\n"); + for (i = 0; i < charger->num_registered_psy; i++) { + power_supply_changed(charger->ports[i]->psy); + charger->ports[i]->last_update = + jiffies - CROS_USB_PD_CACHE_UPDATE_DELAY; + } + queue_delayed_work(charger->log_workqueue, &charger->log_work, + CROS_USB_PD_LOG_UPDATE_DELAY); + + return 0; +} + +static int cros_usb_pd_charger_suspend(struct device *dev) +{ + struct charger_data *charger = dev_get_drvdata(dev); + + charger->suspended = true; + + flush_delayed_work(&charger->log_work); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(cros_usb_pd_charger_pm_ops, + cros_usb_pd_charger_suspend, cros_usb_pd_charger_resume); + +static struct platform_driver cros_usb_pd_charger_driver = { + .driver = { + .name = "cros-usb-pd-charger", + .pm = &cros_usb_pd_charger_pm_ops, + }, + .probe = cros_usb_pd_charger_probe, + .remove = cros_usb_pd_charger_remove, +}; + +module_platform_driver(cros_usb_pd_charger_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Chrome USB PD charger"); +MODULE_ALIAS("power_supply:cros-usb-pd-charger"); -- 2.5.5