Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756933AbcDMOlN (ORCPT ); Wed, 13 Apr 2016 10:41:13 -0400 Received: from down.free-electrons.com ([37.187.137.238]:42828 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755795AbcDMOlK (ORCPT ); Wed, 13 Apr 2016 10:41:10 -0400 Date: Wed, 13 Apr 2016 16:41:06 +0200 From: Boris Brezillon To: David Woodhouse , Brian Norris , linux-mtd@lists.infradead.org, Boris Brezillon , Richard Weinberger Cc: Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Ralf Baechle , linux-mips@linux-mips.org, Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Wenyou Yang , Josh Wu , Ezequiel Garcia , Maxime Ripard , Chen-Yu Tsai , linux-sunxi@googlegroups.com, Stefan Agner , Kyungmin Park , Greg Kroah-Hartman , devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, punnaiah choudary kalluri , Priit Laes , Kamal Dasu , bcm-kernel-feedback-list@broadcom.com, linux-api@vger.kernel.org, Harvey Hunt , Archit Taneja , Han Xu , Huang Shijie Subject: Re: [PATCH v5 22/50] mtd: nand: atmel: switch to mtd_ooblayout_ops Message-ID: <20160413164106.46d8374a@bbrezillon> In-Reply-To: <1459354505-32551-23-git-send-email-boris.brezillon@free-electrons.com> References: <1459354505-32551-1-git-send-email-boris.brezillon@free-electrons.com> <1459354505-32551-23-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: Claws Mail 3.12.0 (GTK+ 2.24.28; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5538 Lines: 182 On Wed, 30 Mar 2016 18:14:37 +0200 Boris Brezillon wrote: > Implementing the mtd_ooblayout_ops interface is the new way of exposing > ECC/OOB layout to MTD users. > > Signed-off-by: Boris Brezillon Tested with mtd_oobtest.ko on sama5d4ek. Tested-by: Boris Brezillon > --- > drivers/mtd/nand/atmel_nand.c | 84 ++++++++++++++++++++----------------------- > 1 file changed, 38 insertions(+), 46 deletions(-) > > diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c > index 321d331..46a601e 100644 > --- a/drivers/mtd/nand/atmel_nand.c > +++ b/drivers/mtd/nand/atmel_nand.c > @@ -72,30 +72,44 @@ struct atmel_nand_nfc_caps { > uint32_t rb_mask; > }; > > -/* oob layout for large page size > +/* > + * oob layout for large page size > * bad block info is on bytes 0 and 1 > * the bytes have to be consecutives to avoid > * several NAND_CMD_RNDOUT during read > - */ > -static struct nand_ecclayout atmel_oobinfo_large = { > - .eccbytes = 4, > - .eccpos = {60, 61, 62, 63}, > - .oobfree = { > - {2, 58} > - }, > -}; > - > -/* oob layout for small page size > + * > + * oob layout for small page size > * bad block info is on bytes 4 and 5 > * the bytes have to be consecutives to avoid > * several NAND_CMD_RNDOUT during read > */ > -static struct nand_ecclayout atmel_oobinfo_small = { > - .eccbytes = 4, > - .eccpos = {0, 1, 2, 3}, > - .oobfree = { > - {6, 10} > - }, > +static int atmel_ooblayout_ecc_sp(struct mtd_info *mtd, int section, > + struct mtd_oob_region *oobregion) > +{ > + if (section) > + return -ERANGE; > + > + oobregion->length = 4; > + oobregion->offset = 0; > + > + return 0; > +} > + > +static int atmel_ooblayout_free_sp(struct mtd_info *mtd, int section, > + struct mtd_oob_region *oobregion) > +{ > + if (section) > + return -ERANGE; > + > + oobregion->offset = 6; > + oobregion->length = mtd->oobsize - oobregion->offset; > + > + return 0; > +} > + > +static const struct mtd_ooblayout_ops atmel_ooblayout_sp_ops = { > + .ecc = atmel_ooblayout_ecc_sp, > + .free = atmel_ooblayout_free_sp, > }; > > struct atmel_nfc { > @@ -163,8 +177,6 @@ struct atmel_nand_host { > int *pmecc_delta; > }; > > -static struct nand_ecclayout atmel_pmecc_oobinfo; > - > /* > * Enable NAND. > */ > @@ -483,22 +495,6 @@ static int pmecc_get_ecc_bytes(int cap, int sector_size) > return (m * cap + 7) / 8; > } > > -static void pmecc_config_ecc_layout(struct nand_ecclayout *layout, > - int oobsize, int ecc_len) > -{ > - int i; > - > - layout->eccbytes = ecc_len; > - > - /* ECC will occupy the last ecc_len bytes continuously */ > - for (i = 0; i < ecc_len; i++) > - layout->eccpos[i] = oobsize - ecc_len + i; > - > - layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES; > - layout->oobfree[0].length = > - oobsize - ecc_len - layout->oobfree[0].offset; > -} > - > static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host) > { > int table_size; > @@ -1013,8 +1009,8 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) > { > struct nand_chip *nand_chip = mtd_to_nand(mtd); > struct atmel_nand_host *host = nand_get_controller_data(nand_chip); > + int eccbytes = mtd_ooblayout_count_eccbytes(mtd); > uint32_t val = 0; > - struct nand_ecclayout *ecc_layout; > struct mtd_oob_region oobregion; > > pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); > @@ -1065,12 +1061,11 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) > | PMECC_CFG_AUTO_DISABLE); > pmecc_writel(host->ecc, CFG, val); > > - ecc_layout = nand_chip->ecc.layout; > pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1); > mtd_ooblayout_ecc(mtd, 0, &oobregion); > pmecc_writel(host->ecc, SADDR, oobregion.offset); > pmecc_writel(host->ecc, EADDR, > - oobregion.offset + ecc_layout->eccbytes - 1); > + oobregion.offset + eccbytes - 1); > /* See datasheet about PMECC Clock Control Register */ > pmecc_writel(host->ecc, CLK, 2); > pmecc_writel(host->ecc, IDR, 0xff); > @@ -1292,11 +1287,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev, > err_no = -EINVAL; > goto err; > } > - pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, > - mtd->oobsize, > - nand_chip->ecc.total); > > - nand_chip->ecc.layout = &atmel_pmecc_oobinfo; > + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); > break; > default: > dev_warn(host->dev, > @@ -1644,19 +1636,19 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev, > /* set ECC page size and oob layout */ > switch (mtd->writesize) { > case 512: > - nand_chip->ecc.layout = &atmel_oobinfo_small; > + mtd_set_ooblayout(mtd, &atmel_ooblayout_sp_ops); > ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); > break; > case 1024: > - nand_chip->ecc.layout = &atmel_oobinfo_large; > + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); > ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056); > break; > case 2048: > - nand_chip->ecc.layout = &atmel_oobinfo_large; > + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); > ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112); > break; > case 4096: > - nand_chip->ecc.layout = &atmel_oobinfo_large; > + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); > ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224); > break; > default: -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com