Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 21 Mar 2003 18:37:29 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 21 Mar 2003 18:37:29 -0500 Received: from modemcable092.130-200-24.mtl.mc.videotron.ca ([24.200.130.92]:19253 "EHLO montezuma.mastecende.com") by vger.kernel.org with ESMTP id ; Fri, 21 Mar 2003 18:37:27 -0500 Date: Fri, 21 Mar 2003 18:44:55 -0500 (EST) From: Zwane Mwaikambo X-X-Sender: zwane@montezuma.mastecende.com To: "Justin T. Gibbs" cc: Linux Kernel Subject: Re: aic7(censored) dying horribly in 2.5.65-mm2 In-Reply-To: <411800000.1048276482@aslan.btc.adaptec.com> Message-ID: References: <411800000.1048276482@aslan.btc.adaptec.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3500 Lines: 83 On Fri, 21 Mar 2003, Justin T. Gibbs wrote: > > Hi Justin i got this booting 2.5.65-mm2, 2.5.65 was fine there is an oops > > right at the end. Is there anything specific you want? > > It would be nice to know the devices that are attached to the controller. > Could you also use the latest driver from here: This is from a 2.4.18-RH kernel scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5 aic7870: Wide Channel A, SCSI Id=7, 16/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5 aic7870: Wide Channel A, SCSI Id=7, 16/253 SCBs Vendor: DEC Model: DLT2000 Rev: 830A Type: Sequential-Access ANSI SCSI revision: 02 Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 3605 Type: CD-ROM ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15150W Rev: 9103 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15150W Rev: 9103 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15150W Rev: 9103 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15150W Rev: 9103 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15150W Rev: 9103 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15150W Rev: 9103 Type: Direct-Access ANSI SCSI revision: 02 scsi1:A:0:0: Tagged Queuing enabled. Depth 253 scsi1:A:1:0: Tagged Queuing enabled. Depth 253 scsi1:A:2:0: Tagged Queuing enabled. Depth 253 scsi1:A:3:0: Tagged Queuing enabled. Depth 253 scsi1:A:4:0: Tagged Queuing enabled. Depth 253 scsi1:A:5:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 Attached scsi disk sdc at scsi1, channel 0, id 2, lun 0 Attached scsi disk sdd at scsi1, channel 0, id 3, lun 0 Attached scsi disk sde at scsi1, channel 0, id 4, lun 0 Attached scsi disk sdf at scsi1, channel 0, id 5, lun 0 (scsi1:A:0): 20.000MB/s transfers (10.000MHz, offset 8, 16bit) SCSI device sda: 8388315 512-byte hdwr sectors (4295 MB) Partition check: sda: sda1 (scsi1:A:1): 20.000MB/s transfers (10.000MHz, offset 8, 16bit) SCSI device sdb: 8388315 512-byte hdwr sectors (4295 MB) sdb: sdb1 sdb2 (scsi1:A:2): 20.000MB/s transfers (10.000MHz, offset 8, 16bit) SCSI device sdc: 8388315 512-byte hdwr sectors (4295 MB) sdc: sdc1 (scsi1:A:3): 20.000MB/s transfers (10.000MHz, offset 8, 16bit) SCSI device sdd: 8388315 512-byte hdwr sectors (4295 MB) sdd: sdd1 (scsi1:A:4): 20.000MB/s transfers (10.000MHz, offset 8, 16bit) SCSI device sde: 8388315 512-byte hdwr sectors (4295 MB) sde: sde1 (scsi1:A:5): 20.000MB/s transfers (10.000MHz, offset 8, 16bit) SCSI device sdf: 8388315 512-byte hdwr sectors (4295 MB) sdf: sdf1 > http://people.FreeBSD.org/~gibbs/linux/SRC/ I'll try that driver this evening. > the driver and send me the output you get. Thanks, Zwane -- function.linuxpower.ca - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/