Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752090AbcDNTS1 (ORCPT ); Thu, 14 Apr 2016 15:18:27 -0400 Received: from down.free-electrons.com ([37.187.137.238]:33608 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751939AbcDNTSV (ORCPT ); Thu, 14 Apr 2016 15:18:21 -0400 From: Boris Brezillon To: Thierry Reding , linux-pwm@vger.kernel.org Cc: Mike Turquette , Stephen Boyd , linux-clk@vger.kernel.org, Mark Brown , Liam Girdwood , Kamil Debski , lm-sensors@lm-sensors.org, Jean Delvare , Guenter Roeck , Dmitry Torokhov , linux-input@vger.kernel.org, Bryan Wu , Richard Purdie , Jacek Anaszewski , linux-leds@vger.kernel.org, Maxime Ripard , Chen-Yu Tsai , linux-sunxi@googlegroups.com, Joachim Eastwood , Thomas Petazzoni , Heiko Stuebner , linux-rockchip@lists.infradead.org, Jingoo Han , Lee Jones , linux-fbdev@vger.kernel.org, Jean-Christophe Plagniol-Villard , Tomi Valkeinen , Robert Jarzmik , Alexandre Belloni , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc@vger.kernel.org, intel-gfx@lists.freedesktop.org, Daniel Vetter , Jani Nikula , Jonathan Corbet , linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Hartley Sweeten , Ryan Mallon , Alexander Shiyan , Milo Kim , Doug Anderson , Caesar Wang , Stephen Barber , Boris Brezillon Subject: [PATCH v5 06/24] leds: pwm: use pwm_get_args() where appropriate Date: Thu, 14 Apr 2016 21:17:26 +0200 Message-Id: <1460661464-11216-7-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1460661464-11216-1-git-send-email-boris.brezillon@free-electrons.com> References: <1460661464-11216-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1676 Lines: 48 The PWM framework has clarified the concept of reference PWM config (the platform dependent config retrieved from the DT or the PWM lookup table) and real PWM state. Use pwm_get_args() when the PWM user wants to retrieve this reference config and not the current state. This is part of the rework allowing the PWM framework to support hardware readout and expose real PWM state even when the PWM has just been requested (before the user calls pwm_config/enable/disable()). Signed-off-by: Boris Brezillon Acked-by: Jacek Anaszewski --- drivers/leds/leds-pwm.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 4783bac..a9145aa 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -91,6 +91,7 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv, struct led_pwm *led, struct device_node *child) { struct led_pwm_data *led_data = &priv->leds[priv->num_leds]; + struct pwm_args pargs; int ret; led_data->active_low = led->active_low; @@ -117,7 +118,15 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv, else led_data->cdev.brightness_set_blocking = led_pwm_set_blocking; - led_data->period = pwm_get_period(led_data->pwm); + /* + * FIXME: pwm_apply_args() should be removed when switching to the + * atomic PWM API. + */ + pwm_apply_args(led_data->pwm); + + pwm_get_args(led_data->pwm, &pargs); + + led_data->period = pargs.period; if (!led_data->period && (led->pwm_period_ns > 0)) led_data->period = led->pwm_period_ns; -- 2.5.0