Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752176AbcDNTSe (ORCPT ); Thu, 14 Apr 2016 15:18:34 -0400 Received: from down.free-electrons.com ([37.187.137.238]:33707 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752026AbcDNTS2 (ORCPT ); Thu, 14 Apr 2016 15:18:28 -0400 From: Boris Brezillon To: Thierry Reding , linux-pwm@vger.kernel.org Cc: Mike Turquette , Stephen Boyd , linux-clk@vger.kernel.org, Mark Brown , Liam Girdwood , Kamil Debski , lm-sensors@lm-sensors.org, Jean Delvare , Guenter Roeck , Dmitry Torokhov , linux-input@vger.kernel.org, Bryan Wu , Richard Purdie , Jacek Anaszewski , linux-leds@vger.kernel.org, Maxime Ripard , Chen-Yu Tsai , linux-sunxi@googlegroups.com, Joachim Eastwood , Thomas Petazzoni , Heiko Stuebner , linux-rockchip@lists.infradead.org, Jingoo Han , Lee Jones , linux-fbdev@vger.kernel.org, Jean-Christophe Plagniol-Villard , Tomi Valkeinen , Robert Jarzmik , Alexandre Belloni , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc@vger.kernel.org, intel-gfx@lists.freedesktop.org, Daniel Vetter , Jani Nikula , Jonathan Corbet , linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Hartley Sweeten , Ryan Mallon , Alexander Shiyan , Milo Kim , Doug Anderson , Caesar Wang , Stephen Barber , Boris Brezillon Subject: [PATCH v5 09/24] backlight: pwm_bl: use pwm_get_args() where appropriate Date: Thu, 14 Apr 2016 21:17:29 +0200 Message-Id: <1460661464-11216-10-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1460661464-11216-1-git-send-email-boris.brezillon@free-electrons.com> References: <1460661464-11216-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1802 Lines: 51 The PWM framework has clarified the concept of reference PWM config (the platform dependent config retrieved from the DT or the PWM lookup table) and real PWM state. Use pwm_get_args() when the PWM user wants to retrieve this reference config and not the current state. This is part of the rework allowing the PWM framework to support hardware readout and expose real PWM state even when the PWM has just been requested (before the user calls pwm_config/enable/disable()). Signed-off-by: Boris Brezillon --- drivers/video/backlight/pwm_bl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index a33a290..b2b366b 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -201,6 +201,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct pwm_bl_data *pb; int initial_blank = FB_BLANK_UNBLANK; + struct pwm_args pargs; int ret; if (!data) { @@ -307,12 +308,19 @@ static int pwm_backlight_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "got pwm for backlight\n"); /* + * FIXME: pwm_apply_args() should be removed when switching to + * the atomic PWM API. + */ + pwm_apply_args(pb->pwm); + + /* * The DT case will set the pwm_period_ns field to 0 and store the * period, parsed from the DT, in the PWM device. For the non-DT case, * set the period from platform data if it has not already been set * via the PWM lookup table. */ - pb->period = pwm_get_period(pb->pwm); + pwm_get_args(pb->pwm, &pargs); + pb->period = pargs.period; if (!pb->period && (data->pwm_period_ns > 0)) pb->period = data->pwm_period_ns; -- 2.5.0