Date: Mon, 18 Apr 2016 15:41:15 +0800
From: Peter Chen <hzpeterchen@gmail.com>
To: Roger Quadros <rogerq@ti.com>
Cc: stern@rowland.harvard.edu, balbi@kernel.org, gregkh@linuxfoundation.org,
        peter.chen@freescale.com, dan.j.williams@intel.com,
        jun.li@freescale.com, mathias.nyman@linux.intel.com, tony@atomide.com,
        Joao.Pinto@synopsys.com, abrestic@chromium.org, r.baldyga@samsung.com,
        linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-omap@vger.kernel.org
Subject: Re: [PATCH v6 02/12] usb: hcd.h: Add OTG to HCD interface
Message-ID: <20160418074115.GD4477@shlinux2.ap.freescale.net>
References: <1459865117-7032-1-git-send-email-rogerq@ti.com>
 <1459865117-7032-3-git-send-email-rogerq@ti.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1459865117-7032-3-git-send-email-rogerq@ti.com>
User-Agent: Mutt/1.5.23 (2014-03-12)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1891
Lines: 59

On Tue, Apr 05, 2016 at 05:05:07PM +0300, Roger Quadros wrote:
> The OTG core will use struct otg_hcd_ops to interface
> with the HCD controller.
> 
> The main purpose of this interface is to avoid directly
> calling HCD APIs from the OTG core as they
> wouldn't be defined in the built-in symbol table if
> CONFIG_USB is m.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  include/linux/usb/hcd.h | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
> index b98f831..861ccaa 100644
> --- a/include/linux/usb/hcd.h
> +++ b/include/linux/usb/hcd.h
> @@ -399,6 +399,30 @@ struct hc_driver {
>  
>  };
>  
> +/**
> + * struct otg_hcd_ops - Interface between OTG core and HCD
> + *
> + * Provided by the HCD core to allow the OTG core to interface with the HCD
> + *
> + * @add: function to add the HCD
> + * @remove: function to remove the HCD
> + * @usb_bus_start_enum: function to immediately start bus enumeration
> + * @usb_control_msg: function to build and send of a control urb
> + * @usb_hub_find_child: function to get pointer to the child device
> + */
> +struct otg_hcd_ops {
> +	int (*add)(struct usb_hcd *hcd,
> +		   unsigned int irqnum, unsigned long irqflags);
> +	void (*remove)(struct usb_hcd *hcd);
> +	int (*usb_bus_start_enum)(struct usb_bus *bus, unsigned int port_num);
> +	int (*usb_control_msg)(struct usb_device *dev, unsigned int pipe,
> +			       __u8 request, __u8 requesttype, __u16 value,
> +			       __u16 index, void *data, __u16 size,
> +			       int timeout);
> +	struct usb_device * (*usb_hub_find_child)(struct usb_device *hdev,
> +						  int port1);
> +};
> +
>  static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
>  {
>  	return hcd->driver->flags & HCD_BH;
> -- 
> 2.5.0
> 

Acked-by: Peter Chen <peter.chen@nxp.com>

-- 

Best Regards,
Peter Chen