Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752198AbcDRKau (ORCPT ); Mon, 18 Apr 2016 06:30:50 -0400 Received: from us01smtprelay-2.synopsys.com ([198.182.60.111]:38019 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750860AbcDRKar convert rfc822-to-8bit (ORCPT ); Mon, 18 Apr 2016 06:30:47 -0400 From: Prabu Thangamuthu To: "Ulf Hansson (ulf.hansson@linaro.org)" , "Adrian Hunter" , Bjorn Helgaas , Andrew Morton , "David S. Miller" , Greg Kroah-Hartman , "Kalle Valo" , Mauro Carvalho Chehab , Guenter Roeck , Jiri Slaby , "Chaotian Jing" , Andrei Pistirica , Ben Hutchings , Joshua Henderson , Ludovic Desroches CC: "prabu.t@synopsys.com" , Manjunath M Bettegowda , "linux-mmc@vger.kernel.org" , "linux-pci@vger.kernel.org" , "linux-kernel@vger.kernel.org" Subject: [PATCH 1/1] mmc: sdhci-pci: add Support of Synopsys DWC_MSHC IP Thread-Topic: [PATCH 1/1] mmc: sdhci-pci: add Support of Synopsys DWC_MSHC IP Thread-Index: AdGZXMqyjTcadzfXTF2nW1agyRLkeg== Date: Mon, 18 Apr 2016 10:30:39 +0000 Message-ID: <705D14B1C7978B40A723277C067CEDE2010A4B0DFB@IN01WEMBXB.internal.synopsys.com> Accept-Language: en-US, en-IN Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.144.52.77] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15322 Lines: 471 Synopsys released SD Host Controller Standard Specification compliant IP called as DWC_MSHC. This patch is to support DWC_MSHC controller with PCI interface. Signed-off-by: Prabu Thangamuthu --- MAINTAINERS | 7 + drivers/mmc/host/Makefile | 3 +- drivers/mmc/host/sdhci-dwc-mshc-pci.c | 298 ++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci-dwc-mshc-pci.h | 58 +++++++ drivers/mmc/host/sdhci-pci-core.c | 14 ++ include/linux/pci_ids.h | 3 + 6 files changed, 382 insertions(+), 1 deletion(-) create mode 100644 drivers/mmc/host/sdhci-dwc-mshc-pci.c create mode 100644 drivers/mmc/host/sdhci-dwc-mshc-pci.h diff --git a/MAINTAINERS b/MAINTAINERS index 1d5b4be..b260b97 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9751,6 +9751,13 @@ S: Maintained F: include/linux/mmc/dw_mmc.h F: drivers/mmc/host/dw_mmc* +SYNOPSYS SDHCI COMPLIANT DWC MSHC DRIVER +M: Prabu Thangamuthu +M: Manjunath M B +L: linux-mmc@vger.kernel.org +S: Maintained +F: drivers/mmc/host/sdhci-dwc-mshc* + SYSTEM TRACE MODULE CLASS M: Alexander Shishkin S: Maintained diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index af918d2..1d2a3cf 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_MXS) += mxs-mmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o -sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o +sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o \ + sdhci-dwc-mshc-pci.o obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o diff --git a/drivers/mmc/host/sdhci-dwc-mshc-pci.c b/drivers/mmc/host/sdhci-dwc-mshc-pci.c new file mode 100644 index 0000000..e934af4 --- /dev/null +++ b/drivers/mmc/host/sdhci-dwc-mshc-pci.c @@ -0,0 +1,298 @@ +/* + * Copyright (C) 2016 Synopsys, Inc. + * + * Author: Manjunath M B + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include "sdhci.h" +#include "sdhci-pci.h" +#include "sdhci-dwc-mshc-pci.h" + +/*****************************************************************************\ + * * + * Hardware specific clock handling * + * * +\*****************************************************************************/ +static const struct sdhci_ops *sdhci_ops; /* Low level hw interface */ + +static void sdhci_set_clock_snps(struct sdhci_host *host, + unsigned int clock) +{ + int div = 0; + int mul = 0; + int div_val = 0; + int mul_val = 0; + int mul_div_val = 0; + int reg = 0; + u16 clk = 0; + u32 vendor_ptr; + unsigned long timeout; + u32 tx_clk_phase_val = SDHC_DEF_TX_CLK_PH_VAL; + u32 rx_clk_phase_val = SDHC_DEF_RX_CLK_PH_VAL; + + /* DWC MSHC Specific clock settings */ + + /* if clock is less than 25MHz, divided clock is used. + * For divided clock, we can use the standard sdhci_set_clock(). + * For clock above 25MHz, DRP clock is used + * Here, we cannot use sdhci_set_clock(), we need to program + * TX RX CLOCK DCM DRP for appropriate clock + */ + + vendor_ptr = sdhci_readw(host, SDHCI_UHS2_VENDOR); + + if (clock <= 25000000) { + /* Then call generic set_clock */ + sdhci_ops->set_clock(host, clock); + } else { + + host->mmc->actual_clock = 0; + + /* Select un-phase shifted clock before reset Tx Tuning DCM*/ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg &= ~SDHC_TX_CLK_SEL_TUNED; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + mdelay(10); + + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + /* Lets chose the Mulitplier value to be 0x2 */ + mul = 0x2; + for (div = 1; div <= 32; div++) { + if (((host->max_clk * mul) / div) + <= clock) + break; + } + /* + * Set Programmable Clock Mode in the Clock + * Control register. + */ + div_val = div - 1; + mul_val = mul - 1; + + host->mmc->actual_clock = (host->max_clk * mul) / div; + /* Program the DCM DRP */ + /* Step 1: Assert DCM Reset */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg = reg | SDHC_CARD_TX_CLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + + /* Step 2: Program the mul and div values in DRP */ + mul_div_val = (mul_val << 8) | div_val; + sdhci_writew(host, mul_div_val, TXRX_CLK_DCM_MUL_DIV_DRP); + + /* Step 3: issue a dummy read from DRP base 0x00 as per + * www.xilinx.com/support/documentation/user_guides/ug191.pdf + */ + reg = sdhci_readw(host, TXRX_CLK_DCM_DRP_BASE_51); + + /* Step 4: De-Assert reset to DCM */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg &= ~SDHC_CARD_TX_CLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + + clk |= SDHCI_PROG_CLOCK_MODE | SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Wait max 20 ms */ + timeout = 20; + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + pr_err("%s: Internal clock never stabilised\n", + mmc_hostname(host->mmc)); + return; + } + timeout--; + mdelay(1); + } + + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* For some bit-files we may have to do phase shifting for + * Tx Clock; Let's do it here + */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg = reg | SDHC_TUNING_TX_CLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + mdelay(10); + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg &= ~SDHC_TUNING_TX_CLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + + /* Select working phase value if clock is <= 50MHz */ + if (clock <= 50000000) { + /*Change the Phase value here */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg = reg | (SDHC_TUNING_TX_CLK_SEL_MASK & + (tx_clk_phase_val << SDHC_TUNING_TX_CLK_SEL_SHIFT)); + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + mdelay(10); + + /* Program to select phase shifted clock */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg = reg | SDHC_TX_CLK_SEL_TUNED; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + mdelay(10); + } + + /* This Clock might have affected the RX CLOCK DCM + * used for Phase control; Reset this DCM for proper clock + */ + + /* Program the DCM DRP */ + /* Step 1: Reset the DCM */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg = reg | SDHC_TUNING_RX_CLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + mdelay(10); + /* Step 2: De-Assert reset to DCM */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg &= ~SDHC_TUNING_RX_CLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + + /* For 50Mhz, tuning is not possible.. Lets fix the sampling + * Phase of Rx Clock here + */ + if (clock <= 50000000) { + /*Change the Phase value here */ + reg = sdhci_readl(host, (SDHC_DBOUNCE + vendor_ptr)); + reg &= ~SDHC_TUNING_RX_CLK_SEL_MASK; + reg = reg | (SDHC_TUNING_RX_CLK_SEL_MASK & + rx_clk_phase_val); + sdhci_writew(host, reg, (SDHC_DBOUNCE + vendor_ptr)); + } + mdelay(10); + } +} + +static int sdhci_pci_enable_dma_snps(struct sdhci_host *host) +{ + /* DWC MSHC Specific Dma Enabling */ + + /* Call generic emable_dma */ + return sdhci_ops->enable_dma(host); +} + +static void sdhci_pci_set_bus_width_snps(struct sdhci_host *host, int width) +{ + /* DWC MSHC Specific Bus Width Setting */ + + /* Call generic set_bus_width */ + sdhci_ops->set_bus_width(host, width); +} + +static void sdhci_reset_snps(struct sdhci_host *host, u8 mask) +{ + /* DWC MSHC Specific hci reset */ + + /* Call generic reset */ + sdhci_ops->reset(host, mask); +} +static void sdhci_set_uhs_signaling_snps(struct sdhci_host *host, + unsigned int timing) +{ + /* DWC MSHC Specific UHS-I Signaling */ + + /* Call generic UHS-I signaling */ + sdhci_ops->set_uhs_signaling(host, timing); +} +static void sdhci_pci_hw_reset_snps(struct sdhci_host *host) +{ + /* DWC MSHC Specific hw reset */ + + /* Call generic hw_reset */ + if (host->ops && host->ops->hw_reset) + sdhci_ops->hw_reset(host); +} +static const struct sdhci_ops sdhci_pci_ops_snps = { + .set_clock = sdhci_set_clock_snps, + .enable_dma = sdhci_pci_enable_dma_snps, + .set_bus_width = sdhci_pci_set_bus_width_snps, + .reset = sdhci_reset_snps, + .set_uhs_signaling = sdhci_set_uhs_signaling_snps, + .hw_reset = sdhci_pci_hw_reset_snps, +}; + +static int snps_init_clock(struct sdhci_host *host) +{ + int div = 0; + int mul = 0; + int div_val = 0; + int mul_val = 0; + int mul_div_val = 0; + int reg = 0; + u32 vendor_ptr; + + vendor_ptr = sdhci_readw(host, SDHCI_UHS2_VENDOR); + + /* Configure the BCLK DRP to get 100 MHZ Clock */ + + /* To get 100MHz from 100MHz input freq, + * mul=2 and div=2 + * Formula: output_clock = (input clock * mul) / div + */ + mul = 2; + div = 2; + mul_val = mul - 1; + div_val = div - 1; + /* Program the DCM DRP */ + /* Step 1: Reset the DCM */ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg = reg | SDHC_BCLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + /* Step 2: Program the mul and div values in DRP */ + mul_div_val = (mul_val << 8) | div_val; + sdhci_writew(host, mul_div_val, BCLK_DCM_MUL_DIV_DRP); + /* Step 3: issue a dummy read from DRP base 0x00 as per + * http://www.xilinx.com/support/documentation/user_guides/ug191.pdf + */ + reg = sdhci_readw(host, BCLK_DCM_DRP_BASE_51); + /* Step 4: De-Assert reset to DCM */ + /* de assert reset*/ + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr)); + reg &= ~SDHC_BCLK_DCM_RST; + sdhci_writew(host, reg, (SDHC_GPIO_OUT + vendor_ptr)); + + /* By Default Clocks to MSHC are off.. + * Before stack applies reset; we need to turn on the clock + */ + sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL); + + return 0; + +} + +int sdhci_pci_probe_slot_snps(struct sdhci_pci_slot *slot) +{ + int ret = 0; + struct sdhci_host *host; + + host = slot->host; + sdhci_ops = host->ops; + host->ops = &sdhci_pci_ops_snps; + + /* Board specific clock initialization */ + ret = snps_init_clock(host); + return ret; +} +EXPORT_SYMBOL_GPL(sdhci_pci_probe_slot_snps); diff --git a/drivers/mmc/host/sdhci-dwc-mshc-pci.h b/drivers/mmc/host/sdhci-dwc-mshc-pci.h new file mode 100644 index 0000000..1635bf2 --- /dev/null +++ b/drivers/mmc/host/sdhci-dwc-mshc-pci.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2016 Synopsys, Inc. + * + * Author: Manjunath M B + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __SDHCI_DWC_MSHC_PCI_H__ +#define __SDHCI_DWC_MSHC_PCI_H__ + +#include "sdhci-pci.h" + +#define SDHCI_UHS2_VENDOR 0xE8 + +#define DRIVER_NAME "sdhci_snps" +#define SDHC_DEF_TX_CLK_PH_VAL 4 +#define SDHC_DEF_RX_CLK_PH_VAL 4 + +/* Synopsys Vendor Specific Registers */ +#define SDHC_DBOUNCE 0x08 +#define SDHC_TUNING_RX_CLK_SEL_MASK 0x000000FF +#define SDHC_GPIO_OUT 0x34 +/* HAPS 51 Based implementation */ +#define SDHC_BCLK_DCM_RST 0x00000001 +#define SDHC_CARD_TX_CLK_DCM_RST 0x00000002 +#define SDHC_TUNING_RX_CLK_DCM_RST 0x00000004 +#define SDHC_TUNING_TX_CLK_DCM_RST 0x00000008 +#define SDHC_TUNING_TX_CLK_SEL_MASK 0x00000070 +#define SDHC_TUNING_TX_CLK_SEL_SHIFT 4 +#define SDHC_TX_CLK_SEL_TUNED 0x00000080 + +/* Offset of BCLK DCM DRP Attributes */ +/* Every attribute is of 16 bit wide */ +#define BCLK_DCM_DRP_BASE_51 0x1000 + +#define BCLK_DCM_MUL_DIV_DRP 0x1050 +#define MUL_MASK_DRP 0xFF00 +#define DIV_MASK_DRP 0x00FF + +/* Offset of TX and RX CLK DCM DRP */ +#define TXRX_CLK_DCM_DRP_BASE_51 0x2000 +#define TXRX_CLK_DCM_MUL_DIV_DRP 0x2050 + +int sdhci_pci_probe_snps(struct sdhci_pci_chip *chip); +int sdhci_pci_probe_slot_snps(struct sdhci_pci_slot *slot); +int sdhci_pci_resume_snps(struct sdhci_pci_chip *chip); +int sdhci_pci_suspend_snps(struct sdhci_pci_chip *chip); + +#endif diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 79e1901..8cf46ec 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -31,6 +31,7 @@ #include "sdhci.h" #include "sdhci-pci.h" #include "sdhci-pci-o2micro.h" +#include "sdhci-dwc-mshc-pci.h" /*****************************************************************************\ * * @@ -70,6 +71,11 @@ static int ricoh_mmc_resume(struct sdhci_pci_chip *chip) msleep(500); return 0; } +/* Synopsys DWC MSHC Controller based SDHCI-PCI */ +static const struct sdhci_pci_fixes sdhci_snps = { + .probe_slot = sdhci_pci_probe_slot_snps, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, +}; static const struct sdhci_pci_fixes sdhci_ricoh = { .probe = ricoh_probe, @@ -797,6 +803,14 @@ static const struct sdhci_pci_fixes sdhci_amd = { static const struct pci_device_id pci_ids[] = { { + .vendor = PCI_VENDOR_ID_SYNOPSYS, + .device = PCI_DEVICE_ID_MSHC_HAPS51, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_snps, + }, + + { .vendor = PCI_VENDOR_ID_RICOH, .device = PCI_DEVICE_ID_RICOH_R5C822, .subvendor = PCI_ANY_ID, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 247da8c..01f743b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2318,6 +2318,9 @@ #define PCI_DEVICE_ID_CENATEK_IDE 0x0001 #define PCI_VENDOR_ID_SYNOPSYS 0x16c3 +#define PCI_DEVICE_ID_MOBSTOR_HAPS51 0xc101 +#define PCI_DEVICE_ID_MSHC_HAPS51 0xc201 +#define PCI_DEVICE_ID_MSHC_HAPSDX 0xc202 #define PCI_VENDOR_ID_VITESSE 0x1725 #define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174 -- 1.9.1