Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 23 Mar 2003 09:20:09 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 23 Mar 2003 09:20:09 -0500 Received: from 205-158-62-158.outblaze.com ([205.158.62.158]:1200 "HELO spf1.us.outblaze.com") by vger.kernel.org with SMTP id ; Sun, 23 Mar 2003 09:20:08 -0500 Message-ID: <20030323143108.30109.qmail@linuxmail.org> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-Mailer: MIME-tools 5.41 (Entity 5.404) From: "Felipe Alfaro Solana" To: baldrick@wanadoo.fr, alan@redhat.com Cc: linux-kernel@vger.kernel.org Date: Sun, 23 Mar 2003 15:31:08 +0100 Subject: Re: 2.5 BK boot hang after ide X-Originating-Ip: 213.4.13.153 X-Originating-Server: ws5-7.us4.outblaze.com Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2146 Lines: 54 ----- Original Message ----- From: Duncan Sands Date: Sun, 23 Mar 2003 14:44:21 +0100 To: alan@redhat.com Subject: 2.5 BK boot hang after ide > Copied down by hand: > > ... > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: IDE controller at PCI slot 00:11.1 > ACPI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255 > VP_IDE: Chipset revision 6 > VP_IDE: not 100% native mode: will probe irqs later > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: VIA vt 8235 (rev 00) IDE UDMA 133 controller on pci00:11.1 > ide0: BM_DMA at 0xfc00-0xfc07, BIOS settings: hda: DMA, hdb: DMA > ide1: BM_DMA at 0xfc08-0xfc0f, BIOS settings: hdc: DMA, hdd: DMA > hda: ST320423A, ATA DISK drive > hdb: Maxtor 6E030L0, ATA DISK drive > id0 at 0x1f0-0x1f7, 0x3f6 on irq 14 > hdc: TOSHIBA DVD-ROM SD-MI402, ATAPI CD/DVD-ROM drive > hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177, 0x376 on irq 15 > hda: host protected area => 1 > hda : 40011300 sectors (20486 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66) > hda: hda1 hda2 hda3 > hdb: host protected area => 1 > hdb : 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(133) > hdb: hdb1 > (hangs) I'm experiencing exactly the same as you: 2.5 won't continue past IDE. I've tried 2.5.65-ac3, 2.5.65-bk3 and 2.5.65-mm4. All of them fail at the same point. I've tried using ACPI, APM, disabling preempt, TCQ, enabling SysRq support, but had no luck. The machine is a Pentium 4 2.0Gz, with a QDI PlatiniX 2D/533-A (i845E), 2 UDMA100 disks (Seagate ST380021A 80GB and IBM-DTLA-307030 20GB), a Pioneer DVD-ROM and Sony CRX185E3). -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/