Return-Path: <linux-kernel-owner+willy=40w.ods.org@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id <S263106AbTCXJ1V>; Mon, 24 Mar 2003 04:27:21 -0500
Received: (majordomo@vger.kernel.org) by vger.kernel.org
	id <S263801AbTCXJ1V>; Mon, 24 Mar 2003 04:27:21 -0500
Received: from smtp2.wanadoo.fr ([193.252.22.26]:33013 "EHLO
	mwinf0501.wanadoo.fr") by vger.kernel.org with ESMTP
	id <S263106AbTCXJ1U>; Mon, 24 Mar 2003 04:27:20 -0500
From: Duncan Sands <baldrick@wanadoo.fr>
To: "Felipe Alfaro Solana" <felipe_alfaro@linuxmail.org>, alan@redhat.com
Subject: Re: 2.5 BK boot hang after ide
Date: Mon, 24 Mar 2003 10:38:11 +0100
User-Agent: KMail/1.5.1
Cc: linux-kernel@vger.kernel.org
References: <20030323143108.30109.qmail@linuxmail.org>
In-Reply-To: <20030323143108.30109.qmail@linuxmail.org>
MIME-Version: 1.0
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Message-Id: <200303241038.11244.baldrick@wanadoo.fr>
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 1907
Lines: 47

> > Copied down by hand:
> >
> > ...
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1
> > ACPI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
> > VP_IDE: Chipset revision 6
> > VP_IDE: not 100% native mode: will probe irqs later
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx VP_IDE: VIA vt 8235 (rev 00) IDE UDMA 133 controller on
> > pci00:11.1 ide0: BM_DMA at 0xfc00-0xfc07, BIOS settings: hda: DMA, hdb:
> > DMA ide1: BM_DMA at 0xfc08-0xfc0f, BIOS settings: hdc: DMA, hdd: DMA hda:
> > ST320423A, ATA DISK drive
> > hdb: Maxtor 6E030L0, ATA DISK drive
> > id0 at 0x1f0-0x1f7, 0x3f6 on irq 14
> > hdc: TOSHIBA DVD-ROM SD-MI402, ATAPI CD/DVD-ROM drive
> > hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
> > ide1 at 0x170-0x177, 0x376 on irq 15
> > hda: host protected area => 1
> > hda : 40011300 sectors (20486 MB) w/512KiB Cache, CHS=39693/16/63,
> > UDMA(66) hda: hda1 hda2 hda3
> > hdb: host protected area => 1
> > hdb : 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63,
> > UDMA(133) hdb: hdb1
> > (hangs)
>
> I'm experiencing exactly the same as you: 2.5 won't
> continue past IDE. I've tried 2.5.65-ac3, 2.5.65-bk3
> and 2.5.65-mm4. All of them fail at the same point.
> I've tried using ACPI, APM, disabling preempt, TCQ,
> enabling SysRq support, but had no luck.
>
> The machine is a Pentium 4 2.0Gz, with a QDI
> PlatiniX 2D/533-A (i845E), 2 UDMA100 disks
> (Seagate ST380021A 80GB and IBM-DTLA-307030
> 20GB), a Pioneer DVD-ROM and Sony CRX185E3).

Seems to be OK with current BK.

Thanks,

Duncan.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/