Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752832AbcDZNCk (ORCPT ); Tue, 26 Apr 2016 09:02:40 -0400 Received: from mx0b-0016f401.pphosted.com ([67.231.156.173]:19880 "EHLO mx0b-0016f401.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752229AbcDZNCT (ORCPT ); Tue, 26 Apr 2016 09:02:19 -0400 From: Jisheng Zhang To: , CC: , , , , Jisheng Zhang Subject: [RESEND PATCH v2 7/7] usb: xhci: plat: add vbus regulator control Date: Tue, 26 Apr 2016 20:57:40 +0800 Message-ID: <1461675460-2295-8-git-send-email-jszhang@marvell.com> X-Mailer: git-send-email 2.8.1 In-Reply-To: <1461675460-2295-1-git-send-email-jszhang@marvell.com> References: <1461675460-2295-1-git-send-email-jszhang@marvell.com> MIME-Version: 1.0 Content-Type: text/plain X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2016-04-26_07:,, signatures=0 X-Proofpoint-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 suspectscore=0 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1603290000 definitions=main-1604260210 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3821 Lines: 142 The Marvell BG4CT STB board has board level vbus control through gpio. This patch adds the vbus regulator control to support this board. Signed-off-by: Jisheng Zhang --- drivers/usb/host/xhci-plat.c | 40 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 2 ++ 2 files changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index d7f4f3c..0310c13 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -178,6 +179,7 @@ static int xhci_plat_probe(struct platform_device *pdev) struct clk *clk; struct usb_phy *usb_phy; struct phy *phy; + struct regulator *vbus; int ret; int irq; @@ -249,13 +251,30 @@ static int xhci_plat_probe(struct platform_device *pdev) device_wakeup_enable(hcd->self.controller); + vbus = devm_regulator_get(&pdev->dev, "vbus"); + if (PTR_ERR(vbus) == -ENODEV) { + vbus = NULL; + } else if (IS_ERR(vbus)) { + ret = PTR_ERR(vbus); + goto disable_clk; + } else if (vbus) { + ret = regulator_enable(vbus); + if (ret) { + dev_err(&pdev->dev, + "failed to enable usb vbus regulator: %d\n", + ret); + goto disable_clk; + } + } + xhci->clk = clk; + xhci->vbus = vbus; xhci->main_hcd = hcd; xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, dev_name(&pdev->dev), hcd); if (!xhci->shared_hcd) { ret = -ENOMEM; - goto disable_clk; + goto disable_vbus; } if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || @@ -323,6 +342,10 @@ disable_usb2_phy: put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); +disable_vbus: + if (vbus) + regulator_disable(vbus); + disable_clk: clk_disable_unprepare(clk); @@ -337,6 +360,7 @@ static int xhci_plat_remove(struct platform_device *dev) struct usb_hcd *hcd = platform_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct clk *clk = xhci->clk; + struct regulator *vbus = xhci->vbus; usb_remove_hcd(xhci->shared_hcd); xhci_plat_phy_exit(xhci->shared_hcd); @@ -347,6 +371,9 @@ static int xhci_plat_remove(struct platform_device *dev) clk_disable_unprepare(clk); usb_put_hcd(hcd); + if (vbus) + regulator_disable(vbus); + return 0; } @@ -356,6 +383,7 @@ static int xhci_plat_suspend(struct device *dev) int ret; struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct regulator *vbus = xhci->vbus; /* * xhci_suspend() needs `do_wakeup` to know whether host is allowed @@ -373,6 +401,9 @@ static int xhci_plat_suspend(struct device *dev) xhci_plat_phy_exit(hcd); clk_disable_unprepare(xhci->clk); + if (vbus) + ret = regulator_disable(vbus); + return ret; } @@ -381,11 +412,18 @@ static int xhci_plat_resume(struct device *dev) int ret; struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct regulator *vbus = xhci->vbus; ret = clk_prepare_enable(xhci->clk); if (ret) return ret; + if (vbus) { + ret = regulator_enable(vbus); + if (ret) + return ret; + } + ret = xhci_plat_phy_init(hcd); if (ret) return ret; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 6c629c9..5fa8662 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1550,6 +1550,8 @@ struct xhci_hcd { struct msix_entry *msix_entries; /* optional clock */ struct clk *clk; + /* optional regulator */ + struct regulator *vbus; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; -- 2.8.1