Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753102AbcDZWR4 (ORCPT ); Tue, 26 Apr 2016 18:17:56 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:40146 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752658AbcDZWRx (ORCPT ); Tue, 26 Apr 2016 18:17:53 -0400 From: Andreas Dannenberg To: , CC: Andreas Dannenberg , Liam Girdwood , Mark Brown , Jaroslav Kysela , Takashi Iwai , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Subject: [PATCH v4 1/2] ASoC: codecs: add TA5720 digital amplifier DT bindings Date: Tue, 26 Apr 2016 17:15:56 -0500 Message-ID: <1461708957-7616-2-git-send-email-dannenberg@ti.com> X-Mailer: git-send-email 2.7.2 In-Reply-To: <1461708957-7616-1-git-send-email-dannenberg@ti.com> References: <1461708957-7616-1-git-send-email-dannenberg@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1563 Lines: 45 The Texas Instruments TAS5720L/M device is a high-efficiency mono Class-D audio power amplifier optimized for high transient power capability to use the dynamic power headroom of small loudspeakers. Its digital time division multiplexed (TDM) interface enables up to 16 devices to share the same bus. Signed-off-by: Andreas Dannenberg --- .../devicetree/bindings/sound/tas5720.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas5720.txt diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt new file mode 100644 index 0000000..806ea73 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -0,0 +1,25 @@ +Texas Instruments TAS5720 Mono Audio amplifier + +The TAS5720 serial control bus communicates through the I2C protocol only. The +serial bus is also used for periodic codec fault checking/reporting during +audio playback. For more product information please see the links below: + +http://www.ti.com/product/TAS5720L +http://www.ti.com/product/TAS5720M + +Required properties: + +- compatible : "ti,tas5720" +- reg : I2C slave address +- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry +- pvdd-supply : phandle to a supply used for the Class-D amp and the analog + +Example: + +tas5720: tas5720@6c { + status = "okay"; + compatible = "ti,tas5720"; + reg = <0x6c>; + dvdd-supply = <&vdd_3v3_reg>; + pvdd-supply = <&_supply_reg>; +}; -- 2.6.4