From: Kedareswara rao Appana <appana.durga.rao@xilinx.com>
To: <robh+dt@kernel.org>, <pawel.moll@arm.com>, <mark.rutland@arm.com>,
        <ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
        <michal.simek@xilinx.com>, <soren.brinkmann@xilinx.com>,
        <vinod.koul@intel.com>, <dan.j.williams@intel.com>,
        <appanad@xilinx.com>, <moritz.fischer@ettus.com>,
        <laurent.pinchart@ideasonboard.com>, <luis@debethencourt.com>,
        <anirudh@xilinx.com>, <punnaia@xilinx.com>
CC: <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <dmaengine@vger.kernel.org>
Subject: [PATCH v7 1/2] Documentation: DT: dma: Add Xilinx zynqmp dma device tree binding documentation
Date: Wed, 27 Apr 2016 12:35:28 +0530
Message-ID: <1461740729-30715-1-git-send-email-appanad@xilinx.com>
MIME-Version: 1.0
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 27 Apr 2016 07:05:37.4094
 (UTC)
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.60.83];Helo=[xsj-pvapsmtpgw01]
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BL2NAM02HT011
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 2866
Lines: 80

Device-tree binding documentation for Xilinx zynqmp dma engine used in
Zynq UltraScale+ MPSoC.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes in v7:
- None.
Changes in v6:
- Removed desc-axi-cache/dst-axi-cache/src-axi-cache properties
  from the binding doc as it allow broken combinations when dma-coherent
  is set as suggested by Rob.
- Fixed minor comments given by Rob related coding(lower case DT node name).
Changes in v5:
- Use dma-coherent flag for coherent transfers as suggested by rob.
- Removed unnecessary properties from binding doc as suggested by Rob.
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None.


 .../devicetree/bindings/dma/xilinx/zynqmp_dma.txt  | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt

diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
new file mode 100644
index 0000000..f0f0b54
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
@@ -0,0 +1,44 @@
+Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
+memory to device and device to memory transfers. It also has flow
+control and rate control support for slave/peripheral dma access.
+
+Required properties:
+- compatible		: Should be "xlnx,zynqmp-dma-1.0"
+- reg			: Memory map for gdma/adma module access.
+- interrupt-parent	: Interrupt controller the interrupt is routed through
+- interrupts		: Should contain DMA channel interrupt.
+- xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
+- clock-names		: List of input clocks "clk_main", "clk_apb"
+			  (see clock bindings for details)
+
+Optional properties:
+- xlnx,include-sg	: Indicates the controller to operate in simple or
+			  scatter gather dma mode
+- xlnx,ratectrl		: Scheduling interval in terms of clock cycles for
+			  source AXI transaction
+- xlnx,overfetch	: Tells whether the channel is allowed to over
+			  fetch the data
+- xlnx,src-issue	: Number of AXI outstanding transactions on source side
+- xlnx,src-burst-len	: AXI length for data read. Support only power of
+			  2 byte values.
+- xlnx,dst-burst-len	: AXI length for data write. Support only power of
+			  2 byte values.
+- dma-coherent		: Present if dma operations are coherent.
+
+Example:
+++++++++
+fpd_dma_chan1: dma@fd500000 {
+	compatible = "xlnx,zynqmp-dma-1.0";
+	reg = <0x0 0xFD500000 0x1000>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 117 4>;
+	clock-names = "clk_main", "clk_apb";
+	xlnx,bus-width = <128>;
+	xlnx,include-sg;
+	xlnx,overfetch;
+	dma-coherent;
+	xlnx,ratectrl = <0>;
+	xlnx,src-issue = <16>;
+	xlnx,src-burst-len = <4>;
+	xlnx,dst-burst-len = <4>;
+};
-- 
2.1.2