Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753262AbcD0Nsl (ORCPT ); Wed, 27 Apr 2016 09:48:41 -0400 Received: from mga03.intel.com ([134.134.136.65]:38646 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753243AbcD0Nsj (ORCPT ); Wed, 27 Apr 2016 09:48:39 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.24,541,1455004800"; d="scan'208";a="941324327" From: Andy Shevchenko To: "Bryan O'Donoghue" , Peter Hurley , linux-serial@vger.kernel.org, Vinod Koul , linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org, Greg Kroah-Hartman , ismo.puustinen@intel.com, Heikki Krogerus Cc: Andy Shevchenko Subject: [PATCH v3 07/11] serial: 8250: enable AFE on ports where FIFO is 16 bytes Date: Wed, 27 Apr 2016 16:48:10 +0300 Message-Id: <1461764894-14891-8-git-send-email-andriy.shevchenko@linux.intel.com> X-Mailer: git-send-email 2.8.0.rc3 In-Reply-To: <1461764894-14891-1-git-send-email-andriy.shevchenko@linux.intel.com> References: <1461764894-14891-1-git-send-email-andriy.shevchenko@linux.intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2020 Lines: 47 Intel Quark has 16550A compatible UART with autoflow feature enabled. It has only 16 bytes of FIFO. Currently serial8250_do_set_termios() prevents to enable autoflow since the minimum requirement of 32 bytes of FIFO size. Drop a FIFO size limitation to allow autoflow control be enabled on such UARTs. While here, comment out UART_CAP_AFE for PORT_AR7 since it wasn't working and it will be not a good idea to use it in conjunction with trigger level of 1 byte. Suggested-by: Peter Hurley Reviewed-by: Peter Hurley Signed-off-by: Andy Shevchenko --- drivers/tty/serial/8250/8250_port.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 00ad263..719a561 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -178,7 +178,7 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 16, .tx_loadsz = 16, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, - .flags = UART_CAP_FIFO | UART_CAP_AFE, + .flags = UART_CAP_FIFO /* | UART_CAP_AFE */, }, [PORT_U6_16550A] = { .name = "U6_16550A", @@ -2528,12 +2528,9 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, /* * MCR-based auto flow control. When AFE is enabled, RTS will be * deasserted when the receive FIFO contains more characters than - * the trigger, or the MCR RTS bit is cleared. In the case where - * the remote UART is not using CTS auto flow control, we must - * have sufficient FIFO entries for the latency of the remote - * UART to respond. IOW, at least 32 bytes of FIFO. + * the trigger, or the MCR RTS bit is cleared. */ - if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { + if (up->capabilities & UART_CAP_AFE) { up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE; -- 2.8.0.rc3