Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753749AbcD0Qgo (ORCPT ); Wed, 27 Apr 2016 12:36:44 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:50438 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753729AbcD0Qgn (ORCPT ); Wed, 27 Apr 2016 12:36:43 -0400 From: Mark Brown To: Matthias Reichl Cc: Martin Sperl , Mark Brown , Liam Girdwood , Mark Brown , Jaroslav Kysela , Takashi Iwai , Stephen Warren , Lee Jones , Eric Anholt , Martin Sperl , Luis de Bethencourt , alsa-devel@alsa-project.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org In-Reply-To: <1461763613-28714-2-git-send-email-hias@horus.com> Message-Id: Date: Wed, 27 Apr 2016 17:36:13 +0100 X-SA-Exim-Connect-IP: 2a01:348:6:8808:fab::3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "ASoC: bcm2835: Add S16_LE support via packed DMA transfers" to the asoc tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on mezzanine.sirena.org.uk) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3080 Lines: 82 The patch ASoC: bcm2835: Add S16_LE support via packed DMA transfers has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From beff053c0ef6983897e3481169292e6435ef0a2d Mon Sep 17 00:00:00 2001 From: Matthias Reichl Date: Wed, 27 Apr 2016 15:26:52 +0200 Subject: [PATCH] ASoC: bcm2835: Add S16_LE support via packed DMA transfers The bcm2835-i2s driver already has support for the S16_LE format but that format hasn't been made available because dmaengine_pcm didn't support packed data transfers. bcm2835-i2s needs 16-bit left+right channel data to be packed into a 32-bit word, the FIFO register is 32-bit only and doesn't support 16-bit access. Now that dmaengine_pcm supports packed transfers the format can be made available by setting the SND_DMAENGINE_PCM_DAI_FLAG_PACK flag. No further configuration is necessary: - snd_dmaengine_dai_dma_data.addr_width is already set to DMA_SLAVE_BUSWIDTH_4_BYTES to force 32-bit DMA transfers - dmaengine_pcm will pick up the S16_LE format from the DAI configuration and make it available since it's no longer masked out due to the PACK flag. - there are no further corner cases to catch in hw_params, since the channel count is fixed at 2 we always have two 16-bit stereo samples that can be transferred via 32-bit DMA Signed-off-by: Matthias Reichl Tested-by: Martin Sperl Signed-off-by: Mark Brown --- sound/soc/bcm/bcm2835-i2s.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c index a0026e2d2f0a..6ba20498202e 100644 --- a/sound/soc/bcm/bcm2835-i2s.c +++ b/sound/soc/bcm/bcm2835-i2s.c @@ -690,6 +690,15 @@ static int bcm2835_i2s_probe(struct platform_device *pdev) dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].maxburst = 2; dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].maxburst = 2; + /* + * Set the PACK flag to enable S16_LE support (2 S16_LE values + * packed into 32-bit transfers). + */ + dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].flags = + SND_DMAENGINE_PCM_DAI_FLAG_PACK; + dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].flags = + SND_DMAENGINE_PCM_DAI_FLAG_PACK; + /* BCLK ratio - use default */ dev->bclk_ratio = 0; -- 2.8.0.rc3