Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753625AbcD1MOO (ORCPT ); Thu, 28 Apr 2016 08:14:14 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:17814 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752983AbcD1MOJ (ORCPT ); Thu, 28 Apr 2016 08:14:09 -0400 From: To: , , , , CC: , , , , , , , , , , Patrice Chotard , , , Subject: [PATCH v2 00/10] STMPE fixes/rework and add STMPE1600 support Date: Thu, 28 Apr 2016 14:12:59 +0200 Message-ID: <1461845589-4826-1-git-send-email-patrice.chotard@st.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.48.1.66] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2016-04-28_07:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2478 Lines: 69 From: Patrice Chotard This series cleans and fixes some bugs in MFD/GPIO STMPE drivers and prepare the ground to add new STMPE1600 support. STMPE1600 datasheet is available here : http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/ i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html Only STMPE1600 has been tested on STM32 platform. As i have no board with others STMPE variant(STMPE610/STMPE801/STMPE811/STMPE1601/STMPE1801/STMPE2401 and STMPE2403), i put in CC boards's maintainers which are using others STMPE variant. If they can kindly check that no regression has been introduce by this series : For ARM/FREESCALE IMX / MXC ARM ARCHITECTURE: _ Shawn Guo _ Sascha Hauer For ARM/SOCFPGA ARCHITECTURE _ Dinh Nguyen For SPEAR PLATFORM SUPPORT _ Viresh Kumar _ Shiraz Hashim For Apalis/Colibri board SUPPORT _ marcel.ziswiler@toradex.com _ stefan@agner.ch _ dev@lynxeye.de _ Thierry Reding _ Alexandre Courbot For ARM/Ux500 ARM ARCHITECTURE _ Linus Walleij v1 => v2: _ update Cc list _ fix kbuild test robot warnings on original patch 3 _ split patch 6 to extract usage of generic bitmask name _ split patch 6 and 7 and introduce a new way to access registers for both mfd/stmpe and gpio/gpio-stmpe drivers. _ remove patch 8 Patrice Chotard (10): mfd: stmpe: Add STMPE_IDX_SYS_CTRL/2 enum mfd: stmpe: Add reset support for all STMPE variant gpio: stmpe: fix edge and rising/falling edge detection gpio: stmpe: write int status register only when needed mfd: stmpe: use generic bit mask name mfd: stmpe: rework registers access gpio: stmpe: rework registers access Documentation: dt: add stmpe1600 compatible string to stmpe mfd mfd: Add STMPE1600 support gpio: stmpe: Add STMPE1600 support Documentation/devicetree/bindings/mfd/stmpe.txt | 2 +- drivers/gpio/gpio-stmpe.c | 167 +++++++++++++++++------- drivers/mfd/stmpe-i2c.c | 2 + drivers/mfd/stmpe.c | 161 +++++++++++++++++++---- drivers/mfd/stmpe.h | 85 ++++++++++-- include/linux/mfd/stmpe.h | 21 +++ 6 files changed, 352 insertions(+), 86 deletions(-) -- 1.9.1