Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752368AbcD1M67 (ORCPT ); Thu, 28 Apr 2016 08:58:59 -0400 Received: from eusmtp01.atmel.com ([212.144.249.243]:40114 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751094AbcD1M65 (ORCPT ); Thu, 28 Apr 2016 08:58:57 -0400 From: Ludovic Desroches To: , CC: , , , Ludovic Desroches Subject: [PATCH v2] mmc: sdhci-of-at91: add presets setup Date: Thu, 28 Apr 2016 14:59:26 +0200 Message-ID: <1461848366-32562-1-git-send-email-ludovic.desroches@atmel.com> X-Mailer: git-send-email 2.5.0 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2725 Lines: 76 The controller claims to support SDR104. In fact, it only supports a degraded SDR104 since the maximum frequency of the SD clock is 120 MHz instead of 208 MHz. The sdhci core is unaware of it and will compute a wrong clock divider. We can deal with this specific case by using presets. Signed-off-by: Ludovic Desroches --- Changes: - v2: - use a define for preset_common since it's a constant drivers/mmc/host/sdhci-of-at91.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index c1923c0..25f779e 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -32,6 +33,8 @@ #define SDMMC_CACR_CAPWREN BIT(0) #define SDMMC_CACR_KEY (0x46 << 8) +#define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */ + struct sdhci_at91_priv { struct clk *hclock; struct clk *gck; @@ -163,6 +166,7 @@ static int sdhci_at91_probe(struct platform_device *pdev) unsigned int clk_base, clk_mul; unsigned int gck_rate, real_gck_rate; int ret; + unsigned int preset_div; match = of_match_device(sdhci_at91_dt_match, &pdev->dev); if (!match) @@ -230,6 +234,28 @@ static int sdhci_at91_probe(struct platform_device *pdev) clk_mul, real_gck_rate); } + /* + * We have to set preset values because it depends on the clk_mul + * value. Moreover, SDR104 is supported in a degraded mode since the + * maximum sd clock value is 120 MHz instead of 208 MHz. For that + * reason, we need to use presets to support SDR104. + */ + preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR12); + preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR25); + preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR50); + preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR104); + preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_DDR50); + clk_prepare_enable(priv->mainck); clk_prepare_enable(priv->gck); -- 2.5.0