Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753884AbcD2M7c (ORCPT ); Fri, 29 Apr 2016 08:59:32 -0400 Received: from michel.telenet-ops.be ([195.130.137.88]:36082 "EHLO michel.telenet-ops.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753864AbcD2M6x (ORCPT ); Fri, 29 Apr 2016 08:58:53 -0400 From: Geert Uytterhoeven To: Greg Kroah-Hartman , Jiri Slaby , Peter Hurley Cc: Magnus Damm , Laurent Pinchart , Yoshinori Sato , linux-serial@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org, Geert Uytterhoeven Subject: [PATCH v2 04/11] serial: sh-sci: Add support for GPIO-controlled modem lines Date: Fri, 29 Apr 2016 14:58:27 +0200 Message-Id: <1461934714-18681-5-git-send-email-geert+renesas@glider.be> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1461934714-18681-1-git-send-email-geert+renesas@glider.be> References: <1461934714-18681-1-git-send-email-geert+renesas@glider.be> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4814 Lines: 155 Enhance the Renesas SCI UART driver to add support for GPIO-controlled modem lines (CTS, DSR, DCD, RNG, RTS, DTR), using the serial_mctrl_gpio helpers. GPIO-controlled modem lines can be used when dedicated modem lines are not available. Invalid configurations specifying both GPIO RTS/CTS and dedicated RTS/CTS are rejected. Signed-off-by: Geert Uytterhoeven --- Testing for regressions on platforms without DT and/or GPIOLIB support (SuperH) would be appreciated. Compile-tested on ecovec24_defconfig(GPIOLIB=y) and se7780_defconfig (GPIOLIB=n). v2: - Drop RFC status. - Fix typo s/UART_GPIO_CAR/UART_GPIO_DCD/ (too many different names for the same thing: CAR, DCD, CD), - Drop OUT[12] from the patch description, - Use intermediate variables to avoid breaking long lines, - Reject combining GPIO and dedicated RTS/CTS. --- drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/sh-sci.c | 46 ++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 46 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 13d4ed6caac4a78b..ebf91bbfdf0f999d 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -735,6 +735,7 @@ config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" depends on SUPERH || ARCH_RENESAS || H8300 || COMPILE_TEST select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB config SERIAL_SH_SCI_NR_UARTS int "Maximum number of SCI(F) serial ports" diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 135f836642ab1c5a..bf3780a7f700cad8 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -57,6 +57,7 @@ #include #endif +#include "serial_mctrl_gpio.h" #include "sh-sci.h" /* Offsets into the sci_port->irqs array */ @@ -111,6 +112,7 @@ struct sci_port { unsigned int error_clear; unsigned int sampling_rate_mask; resource_size_t reg_size; + struct mctrl_gpios *gpios; /* Break timer */ struct timer_list break_timer; @@ -1817,6 +1819,8 @@ static unsigned int sci_tx_empty(struct uart_port *port) */ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) { + struct sci_port *s = to_sci_port(port); + if (mctrl & TIOCM_LOOP) { const struct plat_sci_reg *reg; @@ -1829,15 +1833,35 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) serial_port_in(port, SCFCR) | SCFCR_LOOP); } + + mctrl_gpio_set(s->gpios, mctrl); } static unsigned int sci_get_mctrl(struct uart_port *port) { + struct sci_port *s = to_sci_port(port); + struct mctrl_gpios *gpios = s->gpios; + unsigned int mctrl = 0; + + mctrl_gpio_get(gpios, &mctrl); + /* * CTS/RTS is handled in hardware when supported, while nothing * else is wired up. Keep it simple and simply assert CTS/DSR/CAR. */ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS))) + mctrl |= TIOCM_CTS; + if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_DSR))) + mctrl |= TIOCM_DSR; + if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_DCD))) + mctrl |= TIOCM_CAR; + + return mctrl; +} + +static void sci_enable_ms(struct uart_port *port) +{ + mctrl_gpio_enable_ms(to_sci_port(port)->gpios); } static void sci_break_ctl(struct uart_port *port, int break_state) @@ -1899,6 +1923,8 @@ static void sci_shutdown(struct uart_port *port) dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + mctrl_gpio_disable_ms(to_sci_port(port)->gpios); + spin_lock_irqsave(&port->lock, flags); sci_stop_rx(port); sci_stop_tx(port); @@ -2300,6 +2326,9 @@ done: sci_start_rx(port); sci_port_disable(s); + + if (UART_ENABLE_MS(port, termios->c_cflag)) + sci_enable_ms(port); } static void sci_pm(struct uart_port *port, unsigned int state, @@ -2425,6 +2454,7 @@ static struct uart_ops sci_uart_ops = { .start_tx = sci_start_tx, .stop_tx = sci_stop_tx, .stop_rx = sci_stop_rx, + .enable_ms = sci_enable_ms, .break_ctl = sci_break_ctl, .startup = sci_startup, .shutdown = sci_shutdown, @@ -2912,6 +2942,20 @@ static int sci_probe_single(struct platform_device *dev, if (ret) return ret; + sciport->gpios = mctrl_gpio_init(&sciport->port, 0); + if (IS_ERR(sciport->gpios) && PTR_ERR(sciport->gpios) != -ENOSYS) + return PTR_ERR(sciport->gpios); + + if (p->capabilities & SCIx_HAVE_RTSCTS) { + if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(sciport->gpios, + UART_GPIO_CTS)) || + !IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(sciport->gpios, + UART_GPIO_RTS))) { + dev_err(&dev->dev, "Conflicting RTS/CTS config\n"); + return -EINVAL; + } + } + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) { sci_cleanup_single(sciport); -- 1.9.1