Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754791AbcJEHfE (ORCPT ); Wed, 5 Oct 2016 03:35:04 -0400 Received: from mail-wm0-f50.google.com ([74.125.82.50]:34389 "EHLO mail-wm0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754661AbcJEHdt (ORCPT ); Wed, 5 Oct 2016 03:33:49 -0400 From: Neil Armstrong To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, sudeep.holla@arm.com, devicetree@vger.kernel.org Cc: Neil Armstrong , linux-amlogic@lists.infradead.org, khilman@baylibre.com, heiko@sntech.de, wxt@rock-chips.com, frank.wang@rock-chips.com Subject: [PATCH v4 6/8] dt-bindings: Add support for Amlogic GXBB SCPI Interface Date: Wed, 5 Oct 2016 09:33:32 +0200 Message-Id: <1475652814-30619-7-git-send-email-narmstrong@baylibre.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1475652814-30619-1-git-send-email-narmstrong@baylibre.com> References: <1475652814-30619-1-git-send-email-narmstrong@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1847 Lines: 41 Acked-by: Rob Herring Signed-off-by: Neil Armstrong --- Documentation/devicetree/bindings/arm/arm,scpi.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index faa4b44..04bc171 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -7,7 +7,7 @@ by Linux to initiate various system control and power operations. Required properties: -- compatible : should be "arm,scpi" +- compatible : should be "arm,scpi" or "amlogic,meson-gxbb-scpi" - mboxes: List of phandle and mailbox channel specifiers All the channels reserved by remote SCP firmware for use by SCPI message protocol should be specified in any order @@ -60,7 +60,8 @@ A small area of SRAM is reserved for SCPI communication between application processors and SCP. Required properties: -- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno +- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno, + or "amlogic,meson-gxbb-sram" for Amlogic GXBB SoC. The rest of the properties should follow the generic mmio-sram description found in ../../sram/sram.txt @@ -70,7 +71,8 @@ Each sub-node represents the reserved area for SCPI. Required sub-node properties: - reg : The base offset and size of the reserved area with the SRAM - compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based - shared memory on Juno platforms + shared memory on Juno platforms or + "amlogic,meson-gxbb-scp-shmem" for Amlogic GXBB SoC. Sensor bindings for the sensors based on SCPI Message Protocol -------------------------------------------------------------- -- 1.9.1