Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754823AbcJEKVi convert rfc822-to-8bit (ORCPT ); Wed, 5 Oct 2016 06:21:38 -0400 Received: from smtp3-g21.free.fr ([212.27.42.3]:6420 "EHLO smtp3-g21.free.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752343AbcJEKVg (ORCPT ); Wed, 5 Oct 2016 06:21:36 -0400 X-Greylist: delayed 1106 seconds by postgrey-1.27 at vger.kernel.org; Wed, 05 Oct 2016 06:21:36 EDT Date: Wed, 5 Oct 2016 12:21:30 +0200 From: Jean-Francois Moine To: Corentin Labbe Cc: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, devicetree@vger.kernel.org, linux@armlinux.org.uk, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH] ARM: dt: sun8i-h3: Add sunxi-sid to dts for sun8i-h3 Message-Id: <20161005122130.8cc229ff5d4990149956b49c@free.fr> In-Reply-To: <1475660904-7959-1-git-send-email-clabbe.montjoie@gmail.com> References: <1475660904-7959-1-git-send-email-clabbe.montjoie@gmail.com> X-Mailer: Sylpheed 3.5.1 (GTK+ 2.24.31; armv7l-unknown-linux-gnueabihf) Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1016 Lines: 36 On Wed, 5 Oct 2016 11:48:24 +0200 Corentin Labbe wrote: > This patch add support for the sunxi-sid driver to the device tree for sun8i-h3. > > Signed-off-by: Corentin Labbe > --- > arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > index 9f58bb4..abfd29c 100644 > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > @@ -211,6 +211,11 @@ > #size-cells = <0>; > }; > > + sid: eeprom@01c14200 { > + compatible = "allwinner,sun7i-a20-sid"; > + reg = <0x01c14200 0x200>; The datasheet says 1Kb starting at 0x01c14000. Is there any reason to reduce the area and to shift the offset? > + }; > + > usbphy: phy@01c19400 { > compatible = "allwinner,sun8i-h3-usb-phy"; > reg = <0x01c19400 0x2c>, > -- > 2.7.3 -- Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/