Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751530AbcJIOoR (ORCPT ); Sun, 9 Oct 2016 10:44:17 -0400 Received: from mail-pa0-f66.google.com ([209.85.220.66]:33829 "EHLO mail-pa0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750869AbcJIOoQ (ORCPT ); Sun, 9 Oct 2016 10:44:16 -0400 From: Harman Kalra To: thomas.petazzoni@free-electrons.com, noralf@tronnes.org Cc: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, Harman Kalra Subject: [PATCH] Staging: fbtft: Fixed open parenthesis alignment check Date: Sun, 9 Oct 2016 20:14:05 +0530 Message-Id: <1476024245-9005-1-git-send-email-harman4linux@gmail.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1434 Lines: 36 This patch resolves all the following CHECKs caught by checkpatch.pl CHECK: Alignment should match open parenthesis Signed-off-by: Harman Kalra --- drivers/staging/fbtft/fb_ili9325.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c index c31e2e0..4ab4479 100644 --- a/drivers/staging/fbtft/fb_ili9325.c +++ b/drivers/staging/fbtft/fb_ili9325.c @@ -38,18 +38,15 @@ static unsigned int vc = 0x03; /* Vci1=Vci*0.80 */ module_param(vc, uint, 0); -MODULE_PARM_DESC(vc, -"Sets the ratio factor of Vci to generate the reference voltages Vci1"); +MODULE_PARM_DESC(vc, "Sets the ratio factor of Vci to generate the reference voltages Vci1"); static unsigned int vrh = 0x0d; /* VREG1OUT=Vci*1.85 */ module_param(vrh, uint, 0); -MODULE_PARM_DESC(vrh, -"Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT"); +MODULE_PARM_DESC(vrh, "Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT"); static unsigned int vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */ module_param(vdv, uint, 0); -MODULE_PARM_DESC(vdv, -"Select the factor of VREG1OUT to set the amplitude of Vcom"); +MODULE_PARM_DESC(vdv, "Select the factor of VREG1OUT to set the amplitude of Vcom"); static unsigned int vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */ module_param(vcm, uint, 0); -- 1.7.9.5