Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752060AbcJIPMo (ORCPT ); Sun, 9 Oct 2016 11:12:44 -0400 Received: from mail-lf0-f68.google.com ([209.85.215.68]:36405 "EHLO mail-lf0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751033AbcJIPMH (ORCPT ); Sun, 9 Oct 2016 11:12:07 -0400 From: Sergio Paracuellos To: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org Subject: [PATCH 02/15] staging: wlan-ng: fix block comment warnings in hfa384x_usb.c Date: Sun, 9 Oct 2016 17:10:19 +0200 Message-Id: <1476025832-15174-3-git-send-email-sergio.paracuellos@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1476025832-15174-1-git-send-email-sergio.paracuellos@gmail.com> References: <20161009143102.GA4231@kroah.com> <1476025832-15174-1-git-send-email-sergio.paracuellos@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 81580 Lines: 2780 This patch fix the following checkpatch.pl warnings in hfa384x_usb.c: WARNING: Block comments should align the * on each line WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Sergio Paracuellos --- drivers/staging/wlan-ng/hfa384x_usb.c | 2370 +++++++++++++++++---------------- 1 file changed, 1213 insertions(+), 1157 deletions(-) diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c index 395690f..1bfea8d 100644 --- a/drivers/staging/wlan-ng/hfa384x_usb.c +++ b/drivers/staging/wlan-ng/hfa384x_usb.c @@ -1,114 +1,114 @@ /* src/prism2/driver/hfa384x_usb.c -* -* Functions that talk to the USB variantof the Intersil hfa384x MAC -* -* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -* -------------------------------------------------------------------- -* -* linux-wlan -* -* The contents of this file are subject to the Mozilla Public -* License Version 1.1 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.mozilla.org/MPL/ -* -* Software distributed under the License is distributed on an "AS -* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* Alternatively, the contents of this file may be used under the -* terms of the GNU Public License version 2 (the "GPL"), in which -* case the provisions of the GPL are applicable instead of the -* above. If you wish to allow the use of your version of this file -* only under the terms of the GPL and not to allow others to use -* your version of this file under the MPL, indicate your decision -* by deleting the provisions above and replace them with the notice -* and other provisions required by the GPL. If you do not delete -* the provisions above, a recipient may use your version of this -* file under either the MPL or the GPL. -* -* -------------------------------------------------------------------- -* -* Inquiries regarding the linux-wlan Open Source project can be -* made directly to: -* -* AbsoluteValue Systems Inc. -* info@linux-wlan.com -* http://www.linux-wlan.com -* -* -------------------------------------------------------------------- -* -* Portions of the development of this software were funded by -* Intersil Corporation as part of PRISM(R) chipset product development. -* -* -------------------------------------------------------------------- -* -* This file implements functions that correspond to the prism2/hfa384x -* 802.11 MAC hardware and firmware host interface. -* -* The functions can be considered to represent several levels of -* abstraction. The lowest level functions are simply C-callable wrappers -* around the register accesses. The next higher level represents C-callable -* prism2 API functions that match the Intersil documentation as closely -* as is reasonable. The next higher layer implements common sequences -* of invocations of the API layer (e.g. write to bap, followed by cmd). -* -* Common sequences: -* hfa384x_drvr_xxx Highest level abstractions provided by the -* hfa384x code. They are driver defined wrappers -* for common sequences. These functions generally -* use the services of the lower levels. -* -* hfa384x_drvr_xxxconfig An example of the drvr level abstraction. These -* functions are wrappers for the RID get/set -* sequence. They call copy_[to|from]_bap() and -* cmd_access(). These functions operate on the -* RIDs and buffers without validation. The caller -* is responsible for that. -* -* API wrapper functions: -* hfa384x_cmd_xxx functions that provide access to the f/w commands. -* The function arguments correspond to each command -* argument, even command arguments that get packed -* into single registers. These functions _just_ -* issue the command by setting the cmd/parm regs -* & reading the status/resp regs. Additional -* activities required to fully use a command -* (read/write from/to bap, get/set int status etc.) -* are implemented separately. Think of these as -* C-callable prism2 commands. -* -* Lowest Layer Functions: -* hfa384x_docmd_xxx These functions implement the sequence required -* to issue any prism2 command. Primarily used by the -* hfa384x_cmd_xxx functions. -* -* hfa384x_bap_xxx BAP read/write access functions. -* Note: we usually use BAP0 for non-interrupt context -* and BAP1 for interrupt context. -* -* hfa384x_dl_xxx download related functions. -* -* Driver State Issues: -* Note that there are two pairs of functions that manage the -* 'initialized' and 'running' states of the hw/MAC combo. The four -* functions are create(), destroy(), start(), and stop(). create() -* sets up the data structures required to support the hfa384x_* -* functions and destroy() cleans them up. The start() function gets -* the actual hardware running and enables the interrupts. The stop() -* function shuts the hardware down. The sequence should be: -* create() -* start() -* . -* . Do interesting things w/ the hardware -* . -* stop() -* destroy() -* -* Note that destroy() can be called without calling stop() first. -* -------------------------------------------------------------------- -*/ + * + * Functions that talk to the USB variantof the Intersil hfa384x MAC + * + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * -------------------------------------------------------------------- + * + * linux-wlan + * + * The contents of this file are subject to the Mozilla Public + * License Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU Public License version 2 (the "GPL"), in which + * case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision + * by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL. If you do not delete + * the provisions above, a recipient may use your version of this + * file under either the MPL or the GPL. + * + * -------------------------------------------------------------------- + * + * Inquiries regarding the linux-wlan Open Source project can be + * made directly to: + * + * AbsoluteValue Systems Inc. + * info@linux-wlan.com + * http://www.linux-wlan.com + * + * -------------------------------------------------------------------- + * + * Portions of the development of this software were funded by + * Intersil Corporation as part of PRISM(R) chipset product development. + * + * -------------------------------------------------------------------- + * + * This file implements functions that correspond to the prism2/hfa384x + * 802.11 MAC hardware and firmware host interface. + * + * The functions can be considered to represent several levels of + * abstraction. The lowest level functions are simply C-callable wrappers + * around the register accesses. The next higher level represents C-callable + * prism2 API functions that match the Intersil documentation as closely + * as is reasonable. The next higher layer implements common sequences + * of invocations of the API layer (e.g. write to bap, followed by cmd). + * + * Common sequences: + * hfa384x_drvr_xxx Highest level abstractions provided by the + * hfa384x code. They are driver defined wrappers + * for common sequences. These functions generally + * use the services of the lower levels. + * + * hfa384x_drvr_xxxconfig An example of the drvr level abstraction. These + * functions are wrappers for the RID get/set + * sequence. They call copy_[to|from]_bap() and + * cmd_access(). These functions operate on the + * RIDs and buffers without validation. The caller + * is responsible for that. + * + * API wrapper functions: + * hfa384x_cmd_xxx functions that provide access to the f/w commands. + * The function arguments correspond to each command + * argument, even command arguments that get packed + * into single registers. These functions _just_ + * issue the command by setting the cmd/parm regs + * & reading the status/resp regs. Additional + * activities required to fully use a command + * (read/write from/to bap, get/set int status etc.) + * are implemented separately. Think of these as + * C-callable prism2 commands. + * + * Lowest Layer Functions: + * hfa384x_docmd_xxx These functions implement the sequence required + * to issue any prism2 command. Primarily used by the + * hfa384x_cmd_xxx functions. + * + * hfa384x_bap_xxx BAP read/write access functions. + * Note: we usually use BAP0 for non-interrupt context + * and BAP1 for interrupt context. + * + * hfa384x_dl_xxx download related functions. + * + * Driver State Issues: + * Note that there are two pairs of functions that manage the + * 'initialized' and 'running' states of the hw/MAC combo. The four + * functions are create(), destroy(), start(), and stop(). create() + * sets up the data structures required to support the hfa384x_* + * functions and destroy() cleans them up. The start() function gets + * the actual hardware running and enables the interrupts. The stop() + * function shuts the hardware down. The sequence should be: + * create() + * start() + * . + * . Do interesting things w/ the hardware + * . + * stop() + * destroy() + * + * Note that destroy() can be called without calling stop() first. + * -------------------------------------------------------------------- + */ #include #include @@ -311,21 +311,22 @@ void dbprint_urb(struct urb *urb) #endif /*---------------------------------------------------------------- -* submit_rx_urb -* -* Listen for input data on the BULK-IN pipe. If the pipe has -* stalled then schedule it to be reset. -* -* Arguments: -* hw device struct -* memflags memory allocation flags -* -* Returns: -* error code from submission -* -* Call context: -* Any -----------------------------------------------------------------*/ + * submit_rx_urb + * + * Listen for input data on the BULK-IN pipe. If the pipe has + * stalled then schedule it to be reset. + * + * Arguments: + * hw device struct + * memflags memory allocation flags + * + * Returns: + * error code from submission + * + * Call context: + * Any + *---------------------------------------------------------------- + */ static int submit_rx_urb(struct hfa384x *hw, gfp_t memflags) { struct sk_buff *skb; @@ -371,23 +372,24 @@ static int submit_rx_urb(struct hfa384x *hw, gfp_t memflags) } /*---------------------------------------------------------------- -* submit_tx_urb -* -* Prepares and submits the URB of transmitted data. If the -* submission fails then it will schedule the output pipe to -* be reset. -* -* Arguments: -* hw device struct -* tx_urb URB of data for transmission -* memflags memory allocation flags -* -* Returns: -* error code from submission -* -* Call context: -* Any -----------------------------------------------------------------*/ + * submit_tx_urb + * + * Prepares and submits the URB of transmitted data. If the + * submission fails then it will schedule the output pipe to + * be reset. + * + * Arguments: + * hw device struct + * tx_urb URB of data for transmission + * memflags memory allocation flags + * + * Returns: + * error code from submission + * + * Call context: + * Any + *---------------------------------------------------------------- + */ static int submit_tx_urb(struct hfa384x *hw, struct urb *tx_urb, gfp_t memflags) { struct net_device *netdev = hw->wlandev->netdev; @@ -416,21 +418,22 @@ static int submit_tx_urb(struct hfa384x *hw, struct urb *tx_urb, gfp_t memflags) } /*---------------------------------------------------------------- -* hfa394x_usb_defer -* -* There are some things that the USB stack cannot do while -* in interrupt context, so we arrange this function to run -* in process context. -* -* Arguments: -* hw device structure -* -* Returns: -* nothing -* -* Call context: -* process (by design) -----------------------------------------------------------------*/ + * hfa394x_usb_defer + * + * There are some things that the USB stack cannot do while + * in interrupt context, so we arrange this function to run + * in process context. + * + * Arguments: + * hw device structure + * + * Returns: + * nothing + * + * Call context: + * process (by design) + *---------------------------------------------------------------- + */ static void hfa384x_usb_defer(struct work_struct *data) { struct hfa384x *hw = container_of(data, struct hfa384x, usb_work); @@ -505,26 +508,27 @@ static void hfa384x_usb_defer(struct work_struct *data) } /*---------------------------------------------------------------- -* hfa384x_create -* -* Sets up the struct hfa384x data structure for use. Note this -* does _not_ initialize the actual hardware, just the data structures -* we use to keep track of its state. -* -* Arguments: -* hw device structure -* irq device irq number -* iobase i/o base address for register access -* membase memory base address for register access -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_create + * + * Sets up the struct hfa384x data structure for use. Note this + * does _not_ initialize the actual hardware, just the data structures + * we use to keep track of its state. + * + * Arguments: + * hw device structure + * irq device irq number + * iobase i/o base address for register access + * membase memory base address for register access + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ void hfa384x_create(struct hfa384x *hw, struct usb_device *usb) { memset(hw, 0, sizeof(struct hfa384x)); @@ -575,27 +579,28 @@ void hfa384x_create(struct hfa384x *hw, struct usb_device *usb) } /*---------------------------------------------------------------- -* hfa384x_destroy -* -* Partner to hfa384x_create(). This function cleans up the hw -* structure so that it can be freed by the caller using a simple -* kfree. Currently, this function is just a placeholder. If, at some -* point in the future, an hw in the 'shutdown' state requires a 'deep' -* kfree, this is where it should be done. Note that if this function -* is called on a _running_ hw structure, the drvr_stop() function is -* called. -* -* Arguments: -* hw device structure -* -* Returns: -* nothing, this function is not allowed to fail. -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_destroy + * + * Partner to hfa384x_create(). This function cleans up the hw + * structure so that it can be freed by the caller using a simple + * kfree. Currently, this function is just a placeholder. If, at some + * point in the future, an hw in the 'shutdown' state requires a 'deep' + * kfree, this is where it should be done. Note that if this function + * is called on a _running_ hw structure, the drvr_stop() function is + * called. + * + * Arguments: + * hw device structure + * + * Returns: + * nothing, this function is not allowed to fail. + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ void hfa384x_destroy(struct hfa384x *hw) { struct sk_buff *skb; @@ -649,10 +654,11 @@ static struct hfa384x_usbctlx *usbctlx_alloc(void) } /*---------------------------------------------------------------- -* Completor object: -* This completor must be passed to hfa384x_usbctlx_complete_sync() -* when processing a CTLX that returns a struct hfa384x_cmdresult structure. -----------------------------------------------------------------*/ + * Completor object: + * This completor must be passed to hfa384x_usbctlx_complete_sync() + * when processing a CTLX that returns a struct hfa384x_cmdresult structure. + *---------------------------------------------------------------- + */ struct usbctlx_cmd_completor { struct usbctlx_completor head; @@ -680,10 +686,11 @@ static inline int usbctlx_cmd_completor_fn(struct usbctlx_completor *head) } /*---------------------------------------------------------------- -* Completor object: -* This completor must be passed to hfa384x_usbctlx_complete_sync() -* when processing a CTLX that reads a RID. -----------------------------------------------------------------*/ + * Completor object: + * This completor must be passed to hfa384x_usbctlx_complete_sync() + * when processing a CTLX that reads a RID. + *---------------------------------------------------------------- + */ struct usbctlx_rrid_completor { struct usbctlx_completor head; @@ -726,21 +733,24 @@ static int usbctlx_rrid_completor_fn(struct usbctlx_completor *head) } /*---------------------------------------------------------------- -* Completor object: -* Interprets the results of a synchronous RID-write -----------------------------------------------------------------*/ + * Completor object: + * Interprets the results of a synchronous RID-write + *---------------------------------------------------------------- + */ #define init_wrid_completor init_cmd_completor /*---------------------------------------------------------------- -* Completor object: -* Interprets the results of a synchronous memory-write -----------------------------------------------------------------*/ + * Completor object: + * Interprets the results of a synchronous memory-write + *---------------------------------------------------------------- + */ #define init_wmem_completor init_cmd_completor /*---------------------------------------------------------------- -* Completor object: -* Interprets the results of a synchronous memory-read -----------------------------------------------------------------*/ + * Completor object: + * Interprets the results of a synchronous memory-read + *---------------------------------------------------------------- + */ struct usbctlx_rmem_completor { struct usbctlx_completor head; @@ -773,26 +783,27 @@ static int usbctlx_rmem_completor_fn(struct usbctlx_completor *head) } /*---------------------------------------------------------------- -* hfa384x_cb_status -* -* Ctlx_complete handler for async CMD type control exchanges. -* mark the hw struct as such. -* -* Note: If the handling is changed here, it should probably be -* changed in docmd as well. -* -* Arguments: -* hw hw struct -* ctlx completed CTLX -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_cb_status + * + * Ctlx_complete handler for async CMD type control exchanges. + * mark the hw struct as such. + * + * Note: If the handling is changed here, it should probably be + * changed in docmd as well. + * + * Arguments: + * hw hw struct + * ctlx completed CTLX + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_cb_status(struct hfa384x *hw, const struct hfa384x_usbctlx *ctlx) { @@ -905,24 +916,25 @@ static inline int hfa384x_docmd_wait(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_cmd_initialize -* -* Issues the initialize command and sets the hw->state based -* on the result. -* -* Arguments: -* hw device structure -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_cmd_initialize + * + * Issues the initialize command and sets the hw->state based + * on the result. + * + * Arguments: + * hw device structure + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_cmd_initialize(struct hfa384x *hw) { int result = 0; @@ -950,25 +962,26 @@ int hfa384x_cmd_initialize(struct hfa384x *hw) } /*---------------------------------------------------------------- -* hfa384x_cmd_disable -* -* Issues the disable command to stop communications on one of -* the MACs 'ports'. -* -* Arguments: -* hw device structure -* macport MAC port number (host order) -* -* Returns: -* 0 success -* >0 f/w reported failure - f/w status code -* <0 driver reported error (timeout|bad arg) -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_cmd_disable + * + * Issues the disable command to stop communications on one of + * the MACs 'ports'. + * + * Arguments: + * hw device structure + * macport MAC port number (host order) + * + * Returns: + * 0 success + * >0 f/w reported failure - f/w status code + * <0 driver reported error (timeout|bad arg) + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_cmd_disable(struct hfa384x *hw, u16 macport) { struct hfa384x_metacmd cmd; @@ -983,25 +996,26 @@ int hfa384x_cmd_disable(struct hfa384x *hw, u16 macport) } /*---------------------------------------------------------------- -* hfa384x_cmd_enable -* -* Issues the enable command to enable communications on one of -* the MACs 'ports'. -* -* Arguments: -* hw device structure -* macport MAC port number -* -* Returns: -* 0 success -* >0 f/w reported failure - f/w status code -* <0 driver reported error (timeout|bad arg) -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_cmd_enable + * + * Issues the enable command to enable communications on one of + * the MACs 'ports'. + * + * Arguments: + * hw device structure + * macport MAC port number + * + * Returns: + * 0 success + * >0 f/w reported failure - f/w status code + * <0 driver reported error (timeout|bad arg) + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_cmd_enable(struct hfa384x *hw, u16 macport) { struct hfa384x_metacmd cmd; @@ -1016,34 +1030,35 @@ int hfa384x_cmd_enable(struct hfa384x *hw, u16 macport) } /*---------------------------------------------------------------- -* hfa384x_cmd_monitor -* -* Enables the 'monitor mode' of the MAC. Here's the description of -* monitor mode that I've received thus far: -* -* "The "monitor mode" of operation is that the MAC passes all -* frames for which the PLCP checks are correct. All received -* MPDUs are passed to the host with MAC Port = 7, with a -* receive status of good, FCS error, or undecryptable. Passing -* certain MPDUs is a violation of the 802.11 standard, but useful -* for a debugging tool." Normal communication is not possible -* while monitor mode is enabled. -* -* Arguments: -* hw device structure -* enable a code (0x0b|0x0f) that enables/disables -* monitor mode. (host order) -* -* Returns: -* 0 success -* >0 f/w reported failure - f/w status code -* <0 driver reported error (timeout|bad arg) -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_cmd_monitor + * + * Enables the 'monitor mode' of the MAC. Here's the description of + * monitor mode that I've received thus far: + * + * "The "monitor mode" of operation is that the MAC passes all + * frames for which the PLCP checks are correct. All received + * MPDUs are passed to the host with MAC Port = 7, with a + * receive status of good, FCS error, or undecryptable. Passing + * certain MPDUs is a violation of the 802.11 standard, but useful + * for a debugging tool." Normal communication is not possible + * while monitor mode is enabled. + * + * Arguments: + * hw device structure + * enable a code (0x0b|0x0f) that enables/disables + * monitor mode. (host order) + * + * Returns: + * 0 success + * >0 f/w reported failure - f/w status code + * <0 driver reported error (timeout|bad arg) + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_cmd_monitor(struct hfa384x *hw, u16 enable) { struct hfa384x_metacmd cmd; @@ -1058,43 +1073,44 @@ int hfa384x_cmd_monitor(struct hfa384x *hw, u16 enable) } /*---------------------------------------------------------------- -* hfa384x_cmd_download -* -* Sets the controls for the MAC controller code/data download -* process. The arguments set the mode and address associated -* with a download. Note that the aux registers should be enabled -* prior to setting one of the download enable modes. -* -* Arguments: -* hw device structure -* mode 0 - Disable programming and begin code exec -* 1 - Enable volatile mem programming -* 2 - Enable non-volatile mem programming -* 3 - Program non-volatile section from NV download -* buffer. -* (host order) -* lowaddr -* highaddr For mode 1, sets the high & low order bits of -* the "destination address". This address will be -* the execution start address when download is -* subsequently disabled. -* For mode 2, sets the high & low order bits of -* the destination in NV ram. -* For modes 0 & 3, should be zero. (host order) -* NOTE: these are CMD format. -* codelen Length of the data to write in mode 2, -* zero otherwise. (host order) -* -* Returns: -* 0 success -* >0 f/w reported failure - f/w status code -* <0 driver reported error (timeout|bad arg) -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_cmd_download + * + * Sets the controls for the MAC controller code/data download + * process. The arguments set the mode and address associated + * with a download. Note that the aux registers should be enabled + * prior to setting one of the download enable modes. + * + * Arguments: + * hw device structure + * mode 0 - Disable programming and begin code exec + * 1 - Enable volatile mem programming + * 2 - Enable non-volatile mem programming + * 3 - Program non-volatile section from NV download + * buffer. + * (host order) + * lowaddr + * highaddr For mode 1, sets the high & low order bits of + * the "destination address". This address will be + * the execution start address when download is + * subsequently disabled. + * For mode 2, sets the high & low order bits of + * the destination in NV ram. + * For modes 0 & 3, should be zero. (host order) + * NOTE: these are CMD format. + * codelen Length of the data to write in mode 2, + * zero otherwise. (host order) + * + * Returns: + * 0 success + * >0 f/w reported failure - f/w status code + * <0 driver reported error (timeout|bad arg) + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_cmd_download(struct hfa384x *hw, u16 mode, u16 lowaddr, u16 highaddr, u16 codelen) { @@ -1114,28 +1130,29 @@ int hfa384x_cmd_download(struct hfa384x *hw, u16 mode, u16 lowaddr, } /*---------------------------------------------------------------- -* hfa384x_corereset -* -* Perform a reset of the hfa38xx MAC core. We assume that the hw -* structure is in its "created" state. That is, it is initialized -* with proper values. Note that if a reset is done after the -* device has been active for awhile, the caller might have to clean -* up some leftover cruft in the hw structure. -* -* Arguments: -* hw device structure -* holdtime how long (in ms) to hold the reset -* settletime how long (in ms) to wait after releasing -* the reset -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_corereset + * + * Perform a reset of the hfa38xx MAC core. We assume that the hw + * structure is in its "created" state. That is, it is initialized + * with proper values. Note that if a reset is done after the + * device has been active for awhile, the caller might have to clean + * up some leftover cruft in the hw structure. + * + * Arguments: + * hw device structure + * holdtime how long (in ms) to hold the reset + * settletime how long (in ms) to wait after releasing + * the reset + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_corereset(struct hfa384x *hw, int holdtime, int settletime, int genesis) { @@ -1151,29 +1168,30 @@ int hfa384x_corereset(struct hfa384x *hw, int holdtime, } /*---------------------------------------------------------------- -* hfa384x_usbctlx_complete_sync -* -* Waits for a synchronous CTLX object to complete, -* and then handles the response. -* -* Arguments: -* hw device structure -* ctlx CTLX ptr -* completor functor object to decide what to -* do with the CTLX's result. -* -* Returns: -* 0 Success -* -ERESTARTSYS Interrupted by a signal -* -EIO CTLX failed -* -ENODEV Adapter was unplugged -* ??? Result from completor -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_usbctlx_complete_sync + * + * Waits for a synchronous CTLX object to complete, + * and then handles the response. + * + * Arguments: + * hw device structure + * ctlx CTLX ptr + * completor functor object to decide what to + * do with the CTLX's result. + * + * Returns: + * 0 Success + * -ERESTARTSYS Interrupted by a signal + * -EIO CTLX failed + * -ENODEV Adapter was unplugged + * ??? Result from completor + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, struct hfa384x_usbctlx *ctlx, struct usbctlx_completor *completor) @@ -1258,37 +1276,38 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_docmd -* -* Constructs a command CTLX and submits it. -* -* NOTE: Any changes to the 'post-submit' code in this function -* need to be carried over to hfa384x_cbcmd() since the handling -* is virtually identical. -* -* Arguments: -* hw device structure -* mode DOWAIT or DOASYNC -* cmd cmd structure. Includes all arguments and result -* data points. All in host order. in host order -* cmdcb command-specific callback -* usercb user callback for async calls, NULL for DOWAIT calls -* usercb_data user supplied data pointer for async calls, NULL -* for DOASYNC calls -* -* Returns: -* 0 success -* -EIO CTLX failure -* -ERESTARTSYS Awakened on signal -* >0 command indicated error, Status and Resp0-2 are -* in hw structure. -* -* Side effects: -* -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_docmd + * + * Constructs a command CTLX and submits it. + * + * NOTE: Any changes to the 'post-submit' code in this function + * need to be carried over to hfa384x_cbcmd() since the handling + * is virtually identical. + * + * Arguments: + * hw device structure + * mode DOWAIT or DOASYNC + * cmd cmd structure. Includes all arguments and result + * data points. All in host order. in host order + * cmdcb command-specific callback + * usercb user callback for async calls, NULL for DOWAIT calls + * usercb_data user supplied data pointer for async calls, NULL + * for DOASYNC calls + * + * Returns: + * 0 success + * -EIO CTLX failure + * -ERESTARTSYS Awakened on signal + * >0 command indicated error, Status and Resp0-2 are + * in hw structure. + * + * Side effects: + * + * + * Call context: + * process + *---------------------------------------------------------------- + */ static int hfa384x_docmd(struct hfa384x *hw, enum cmd_mode mode, @@ -1342,41 +1361,42 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_dorrid -* -* Constructs a read rid CTLX and issues it. -* -* NOTE: Any changes to the 'post-submit' code in this function -* need to be carried over to hfa384x_cbrrid() since the handling -* is virtually identical. -* -* Arguments: -* hw device structure -* mode DOWAIT or DOASYNC -* rid Read RID number (host order) -* riddata Caller supplied buffer that MAC formatted RID.data -* record will be written to for DOWAIT calls. Should -* be NULL for DOASYNC calls. -* riddatalen Buffer length for DOWAIT calls. Zero for DOASYNC calls. -* cmdcb command callback for async calls, NULL for DOWAIT calls -* usercb user callback for async calls, NULL for DOWAIT calls -* usercb_data user supplied data pointer for async calls, NULL -* for DOWAIT calls -* -* Returns: -* 0 success -* -EIO CTLX failure -* -ERESTARTSYS Awakened on signal -* -ENODATA riddatalen != macdatalen -* >0 command indicated error, Status and Resp0-2 are -* in hw structure. -* -* Side effects: -* -* Call context: -* interrupt (DOASYNC) -* process (DOWAIT or DOASYNC) -----------------------------------------------------------------*/ + * hfa384x_dorrid + * + * Constructs a read rid CTLX and issues it. + * + * NOTE: Any changes to the 'post-submit' code in this function + * need to be carried over to hfa384x_cbrrid() since the handling + * is virtually identical. + * + * Arguments: + * hw device structure + * mode DOWAIT or DOASYNC + * rid Read RID number (host order) + * riddata Caller supplied buffer that MAC formatted RID.data + * record will be written to for DOWAIT calls. Should + * be NULL for DOASYNC calls. + * riddatalen Buffer length for DOWAIT calls. Zero for DOASYNC calls. + * cmdcb command callback for async calls, NULL for DOWAIT calls + * usercb user callback for async calls, NULL for DOWAIT calls + * usercb_data user supplied data pointer for async calls, NULL + * for DOWAIT calls + * + * Returns: + * 0 success + * -EIO CTLX failure + * -ERESTARTSYS Awakened on signal + * -ENODATA riddatalen != macdatalen + * >0 command indicated error, Status and Resp0-2 are + * in hw structure. + * + * Side effects: + * + * Call context: + * interrupt (DOASYNC) + * process (DOWAIT or DOASYNC) + *---------------------------------------------------------------- + */ static int hfa384x_dorrid(struct hfa384x *hw, enum cmd_mode mode, @@ -1427,37 +1447,38 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_dowrid -* -* Constructs a write rid CTLX and issues it. -* -* NOTE: Any changes to the 'post-submit' code in this function -* need to be carried over to hfa384x_cbwrid() since the handling -* is virtually identical. -* -* Arguments: -* hw device structure -* enum cmd_mode DOWAIT or DOASYNC -* rid RID code -* riddata Data portion of RID formatted for MAC -* riddatalen Length of the data portion in bytes -* cmdcb command callback for async calls, NULL for DOWAIT calls -* usercb user callback for async calls, NULL for DOWAIT calls -* usercb_data user supplied data pointer for async calls -* -* Returns: -* 0 success -* -ETIMEDOUT timed out waiting for register ready or -* command completion -* >0 command indicated error, Status and Resp0-2 are -* in hw structure. -* -* Side effects: -* -* Call context: -* interrupt (DOASYNC) -* process (DOWAIT or DOASYNC) -----------------------------------------------------------------*/ + * hfa384x_dowrid + * + * Constructs a write rid CTLX and issues it. + * + * NOTE: Any changes to the 'post-submit' code in this function + * need to be carried over to hfa384x_cbwrid() since the handling + * is virtually identical. + * + * Arguments: + * hw device structure + * enum cmd_mode DOWAIT or DOASYNC + * rid RID code + * riddata Data portion of RID formatted for MAC + * riddatalen Length of the data portion in bytes + * cmdcb command callback for async calls, NULL for DOWAIT calls + * usercb user callback for async calls, NULL for DOWAIT calls + * usercb_data user supplied data pointer for async calls + * + * Returns: + * 0 success + * -ETIMEDOUT timed out waiting for register ready or + * command completion + * >0 command indicated error, Status and Resp0-2 are + * in hw structure. + * + * Side effects: + * + * Call context: + * interrupt (DOASYNC) + * process (DOWAIT or DOASYNC) + *---------------------------------------------------------------- + */ static int hfa384x_dowrid(struct hfa384x *hw, enum cmd_mode mode, @@ -1513,38 +1534,39 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_dormem -* -* Constructs a readmem CTLX and issues it. -* -* NOTE: Any changes to the 'post-submit' code in this function -* need to be carried over to hfa384x_cbrmem() since the handling -* is virtually identical. -* -* Arguments: -* hw device structure -* mode DOWAIT or DOASYNC -* page MAC address space page (CMD format) -* offset MAC address space offset -* data Ptr to data buffer to receive read -* len Length of the data to read (max == 2048) -* cmdcb command callback for async calls, NULL for DOWAIT calls -* usercb user callback for async calls, NULL for DOWAIT calls -* usercb_data user supplied data pointer for async calls -* -* Returns: -* 0 success -* -ETIMEDOUT timed out waiting for register ready or -* command completion -* >0 command indicated error, Status and Resp0-2 are -* in hw structure. -* -* Side effects: -* -* Call context: -* interrupt (DOASYNC) -* process (DOWAIT or DOASYNC) -----------------------------------------------------------------*/ + * hfa384x_dormem + * + * Constructs a readmem CTLX and issues it. + * + * NOTE: Any changes to the 'post-submit' code in this function + * need to be carried over to hfa384x_cbrmem() since the handling + * is virtually identical. + * + * Arguments: + * hw device structure + * mode DOWAIT or DOASYNC + * page MAC address space page (CMD format) + * offset MAC address space offset + * data Ptr to data buffer to receive read + * len Length of the data to read (max == 2048) + * cmdcb command callback for async calls, NULL for DOWAIT calls + * usercb user callback for async calls, NULL for DOWAIT calls + * usercb_data user supplied data pointer for async calls + * + * Returns: + * 0 success + * -ETIMEDOUT timed out waiting for register ready or + * command completion + * >0 command indicated error, Status and Resp0-2 are + * in hw structure. + * + * Side effects: + * + * Call context: + * interrupt (DOASYNC) + * process (DOWAIT or DOASYNC) + *---------------------------------------------------------------- + */ static int hfa384x_dormem(struct hfa384x *hw, enum cmd_mode mode, @@ -1604,38 +1626,39 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_dowmem -* -* Constructs a writemem CTLX and issues it. -* -* NOTE: Any changes to the 'post-submit' code in this function -* need to be carried over to hfa384x_cbwmem() since the handling -* is virtually identical. -* -* Arguments: -* hw device structure -* mode DOWAIT or DOASYNC -* page MAC address space page (CMD format) -* offset MAC address space offset -* data Ptr to data buffer containing write data -* len Length of the data to read (max == 2048) -* cmdcb command callback for async calls, NULL for DOWAIT calls -* usercb user callback for async calls, NULL for DOWAIT calls -* usercb_data user supplied data pointer for async calls. -* -* Returns: -* 0 success -* -ETIMEDOUT timed out waiting for register ready or -* command completion -* >0 command indicated error, Status and Resp0-2 are -* in hw structure. -* -* Side effects: -* -* Call context: -* interrupt (DOWAIT) -* process (DOWAIT or DOASYNC) -----------------------------------------------------------------*/ + * hfa384x_dowmem + * + * Constructs a writemem CTLX and issues it. + * + * NOTE: Any changes to the 'post-submit' code in this function + * need to be carried over to hfa384x_cbwmem() since the handling + * is virtually identical. + * + * Arguments: + * hw device structure + * mode DOWAIT or DOASYNC + * page MAC address space page (CMD format) + * offset MAC address space offset + * data Ptr to data buffer containing write data + * len Length of the data to read (max == 2048) + * cmdcb command callback for async calls, NULL for DOWAIT calls + * usercb user callback for async calls, NULL for DOWAIT calls + * usercb_data user supplied data pointer for async calls. + * + * Returns: + * 0 success + * -ETIMEDOUT timed out waiting for register ready or + * command completion + * >0 command indicated error, Status and Resp0-2 are + * in hw structure. + * + * Side effects: + * + * Call context: + * interrupt (DOWAIT) + * process (DOWAIT or DOASYNC) + *---------------------------------------------------------------- + */ static int hfa384x_dowmem(struct hfa384x *hw, enum cmd_mode mode, @@ -1695,27 +1718,28 @@ static int hfa384x_usbctlx_complete_sync(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_drvr_disable -* -* Issues the disable command to stop communications on one of -* the MACs 'ports'. Only macport 0 is valid for stations. -* APs may also disable macports 1-6. Only ports that have been -* previously enabled may be disabled. -* -* Arguments: -* hw device structure -* macport MAC port number (host order) -* -* Returns: -* 0 success -* >0 f/w reported failure - f/w status code -* <0 driver reported error (timeout|bad arg) -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_disable + * + * Issues the disable command to stop communications on one of + * the MACs 'ports'. Only macport 0 is valid for stations. + * APs may also disable macports 1-6. Only ports that have been + * previously enabled may be disabled. + * + * Arguments: + * hw device structure + * macport MAC port number (host order) + * + * Returns: + * 0 success + * >0 f/w reported failure - f/w status code + * <0 driver reported error (timeout|bad arg) + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_disable(struct hfa384x *hw, u16 macport) { int result = 0; @@ -1733,27 +1757,28 @@ int hfa384x_drvr_disable(struct hfa384x *hw, u16 macport) } /*---------------------------------------------------------------- -* hfa384x_drvr_enable -* -* Issues the enable command to enable communications on one of -* the MACs 'ports'. Only macport 0 is valid for stations. -* APs may also enable macports 1-6. Only ports that are currently -* disabled may be enabled. -* -* Arguments: -* hw device structure -* macport MAC port number -* -* Returns: -* 0 success -* >0 f/w reported failure - f/w status code -* <0 driver reported error (timeout|bad arg) -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_enable + * + * Issues the enable command to enable communications on one of + * the MACs 'ports'. Only macport 0 is valid for stations. + * APs may also enable macports 1-6. Only ports that are currently + * disabled may be enabled. + * + * Arguments: + * hw device structure + * macport MAC port number + * + * Returns: + * 0 success + * >0 f/w reported failure - f/w status code + * <0 driver reported error (timeout|bad arg) + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_enable(struct hfa384x *hw, u16 macport) { int result = 0; @@ -1771,26 +1796,27 @@ int hfa384x_drvr_enable(struct hfa384x *hw, u16 macport) } /*---------------------------------------------------------------- -* hfa384x_drvr_flashdl_enable -* -* Begins the flash download state. Checks to see that we're not -* already in a download state and that a port isn't enabled. -* Sets the download state and retrieves the flash download -* buffer location, buffer size, and timeout length. -* -* Arguments: -* hw device structure -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_flashdl_enable + * + * Begins the flash download state. Checks to see that we're not + * already in a download state and that a port isn't enabled. + * Sets the download state and retrieves the flash download + * buffer location, buffer size, and timeout length. + * + * Arguments: + * hw device structure + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_flashdl_enable(struct hfa384x *hw) { int result = 0; @@ -1832,24 +1858,25 @@ int hfa384x_drvr_flashdl_enable(struct hfa384x *hw) } /*---------------------------------------------------------------- -* hfa384x_drvr_flashdl_disable -* -* Ends the flash download state. Note that this will cause the MAC -* firmware to restart. -* -* Arguments: -* hw device structure -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_flashdl_disable + * + * Ends the flash download state. Note that this will cause the MAC + * firmware to restart. + * + * Arguments: + * hw device structure + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_flashdl_disable(struct hfa384x *hw) { /* Check that we're already in the download state */ @@ -1867,34 +1894,35 @@ int hfa384x_drvr_flashdl_disable(struct hfa384x *hw) } /*---------------------------------------------------------------- -* hfa384x_drvr_flashdl_write -* -* Performs a FLASH download of a chunk of data. First checks to see -* that we're in the FLASH download state, then sets the download -* mode, uses the aux functions to 1) copy the data to the flash -* buffer, 2) sets the download 'write flash' mode, 3) readback and -* compare. Lather rinse, repeat as many times an necessary to get -* all the given data into flash. -* When all data has been written using this function (possibly -* repeatedly), call drvr_flashdl_disable() to end the download state -* and restart the MAC. -* -* Arguments: -* hw device structure -* daddr Card address to write to. (host order) -* buf Ptr to data to write. -* len Length of data (host order). -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_flashdl_write + * + * Performs a FLASH download of a chunk of data. First checks to see + * that we're in the FLASH download state, then sets the download + * mode, uses the aux functions to 1) copy the data to the flash + * buffer, 2) sets the download 'write flash' mode, 3) readback and + * compare. Lather rinse, repeat as many times an necessary to get + * all the given data into flash. + * When all data has been written using this function (possibly + * repeatedly), call drvr_flashdl_disable() to end the download state + * and restart the MAC. + * + * Arguments: + * hw device structure + * daddr Card address to write to. (host order) + * buf Ptr to data to write. + * len Length of data (host order). + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_flashdl_write(struct hfa384x *hw, u32 daddr, void *buf, u32 len) { @@ -2010,30 +2038,31 @@ int hfa384x_drvr_flashdl_write(struct hfa384x *hw, u32 daddr, } /*---------------------------------------------------------------- -* hfa384x_drvr_getconfig -* -* Performs the sequence necessary to read a config/info item. -* -* Arguments: -* hw device structure -* rid config/info record id (host order) -* buf host side record buffer. Upon return it will -* contain the body portion of the record (minus the -* RID and len). -* len buffer length (in bytes, should match record length) -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -ENODATA length mismatch between argument and retrieved -* record. -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_getconfig + * + * Performs the sequence necessary to read a config/info item. + * + * Arguments: + * hw device structure + * rid config/info record id (host order) + * buf host side record buffer. Upon return it will + * contain the body portion of the record (minus the + * RID and len). + * len buffer length (in bytes, should match record length) + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * -ENODATA length mismatch between argument and retrieved + * record. + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_getconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len) { return hfa384x_dorrid_wait(hw, rid, buf, len); @@ -2061,7 +2090,8 @@ int hfa384x_drvr_getconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len) * * Call context: * process - ----------------------------------------------------------------*/ + *---------------------------------------------------------------- + */ int hfa384x_drvr_setconfig_async(struct hfa384x *hw, u16 rid, @@ -2073,23 +2103,24 @@ int hfa384x_drvr_getconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len) } /*---------------------------------------------------------------- -* hfa384x_drvr_ramdl_disable -* -* Ends the ram download state. -* -* Arguments: -* hw device structure -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_ramdl_disable + * + * Ends the ram download state. + * + * Arguments: + * hw device structure + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_ramdl_disable(struct hfa384x *hw) { /* Check that we're already in the download state */ @@ -2107,29 +2138,30 @@ int hfa384x_drvr_ramdl_disable(struct hfa384x *hw) } /*---------------------------------------------------------------- -* hfa384x_drvr_ramdl_enable -* -* Begins the ram download state. Checks to see that we're not -* already in a download state and that a port isn't enabled. -* Sets the download state and calls cmd_download with the -* ENABLE_VOLATILE subcommand and the exeaddr argument. -* -* Arguments: -* hw device structure -* exeaddr the card execution address that will be -* jumped to when ramdl_disable() is called -* (host order). -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_ramdl_enable + * + * Begins the ram download state. Checks to see that we're not + * already in a download state and that a port isn't enabled. + * Sets the download state and calls cmd_download with the + * ENABLE_VOLATILE subcommand and the exeaddr argument. + * + * Arguments: + * hw device structure + * exeaddr the card execution address that will be + * jumped to when ramdl_disable() is called + * (host order). + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_ramdl_enable(struct hfa384x *hw, u32 exeaddr) { int result = 0; @@ -2174,31 +2206,32 @@ int hfa384x_drvr_ramdl_enable(struct hfa384x *hw, u32 exeaddr) } /*---------------------------------------------------------------- -* hfa384x_drvr_ramdl_write -* -* Performs a RAM download of a chunk of data. First checks to see -* that we're in the RAM download state, then uses the [read|write]mem USB -* commands to 1) copy the data, 2) readback and compare. The download -* state is unaffected. When all data has been written using -* this function, call drvr_ramdl_disable() to end the download state -* and restart the MAC. -* -* Arguments: -* hw device structure -* daddr Card address to write to. (host order) -* buf Ptr to data to write. -* len Length of data (host order). -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_ramdl_write + * + * Performs a RAM download of a chunk of data. First checks to see + * that we're in the RAM download state, then uses the [read|write]mem USB + * commands to 1) copy the data, 2) readback and compare. The download + * state is unaffected. When all data has been written using + * this function, call drvr_ramdl_disable() to end the download state + * and restart the MAC. + * + * Arguments: + * hw device structure + * daddr Card address to write to. (host order) + * buf Ptr to data to write. + * len Length of data (host order). + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_ramdl_write(struct hfa384x *hw, u32 daddr, void *buf, u32 len) { int result = 0; @@ -2249,36 +2282,37 @@ int hfa384x_drvr_ramdl_write(struct hfa384x *hw, u32 daddr, void *buf, u32 len) } /*---------------------------------------------------------------- -* hfa384x_drvr_readpda -* -* Performs the sequence to read the PDA space. Note there is no -* drvr_writepda() function. Writing a PDA is -* generally implemented by a calling component via calls to -* cmd_download and writing to the flash download buffer via the -* aux regs. -* -* Arguments: -* hw device structure -* buf buffer to store PDA in -* len buffer length -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -ETIMEDOUT timeout waiting for the cmd regs to become -* available, or waiting for the control reg -* to indicate the Aux port is enabled. -* -ENODATA the buffer does NOT contain a valid PDA. -* Either the card PDA is bad, or the auxdata -* reads are giving us garbage. - -* -* Side effects: -* -* Call context: -* process or non-card interrupt. -----------------------------------------------------------------*/ + * hfa384x_drvr_readpda + * + * Performs the sequence to read the PDA space. Note there is no + * drvr_writepda() function. Writing a PDA is + * generally implemented by a calling component via calls to + * cmd_download and writing to the flash download buffer via the + * aux regs. + * + * Arguments: + * hw device structure + * buf buffer to store PDA in + * len buffer length + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * -ETIMEDOUT timeout waiting for the cmd regs to become + * available, or waiting for the control reg + * to indicate the Aux port is enabled. + * -ENODATA the buffer does NOT contain a valid PDA. + * Either the card PDA is bad, or the auxdata + * reads are giving us garbage. + * + * + * Side effects: + * + * Call context: + * process or non-card interrupt. + *---------------------------------------------------------------- + */ int hfa384x_drvr_readpda(struct hfa384x *hw, void *buf, unsigned int len) { int result = 0; @@ -2369,51 +2403,52 @@ int hfa384x_drvr_readpda(struct hfa384x *hw, void *buf, unsigned int len) } /*---------------------------------------------------------------- -* hfa384x_drvr_setconfig -* -* Performs the sequence necessary to write a config/info item. -* -* Arguments: -* hw device structure -* rid config/info record id (in host order) -* buf host side record buffer -* len buffer length (in bytes) -* -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_setconfig + * + * Performs the sequence necessary to write a config/info item. + * + * Arguments: + * hw device structure + * rid config/info record id (in host order) + * buf host side record buffer + * len buffer length (in bytes) + * + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_setconfig(struct hfa384x *hw, u16 rid, void *buf, u16 len) { return hfa384x_dowrid_wait(hw, rid, buf, len); } /*---------------------------------------------------------------- -* hfa384x_drvr_start -* -* Issues the MAC initialize command, sets up some data structures, -* and enables the interrupts. After this function completes, the -* low-level stuff should be ready for any/all commands. -* -* Arguments: -* hw device structure -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ - + * hfa384x_drvr_start + * + * Issues the MAC initialize command, sets up some data structures, + * and enables the interrupts. After this function completes, the + * low-level stuff should be ready for any/all commands. + * + * Arguments: + * hw device structure + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_start(struct hfa384x *hw) { int result, result1, result2; @@ -2497,24 +2532,25 @@ int hfa384x_drvr_start(struct hfa384x *hw) } /*---------------------------------------------------------------- -* hfa384x_drvr_stop -* -* Shuts down the MAC to the point where it is safe to unload the -* driver. Any subsystem that may be holding a data or function -* ptr into the driver must be cleared/deinitialized. -* -* Arguments: -* hw device structure -* Returns: -* 0 success -* >0 f/w reported error - f/w status code -* <0 driver reported error -* -* Side effects: -* -* Call context: -* process -----------------------------------------------------------------*/ + * hfa384x_drvr_stop + * + * Shuts down the MAC to the point where it is safe to unload the + * driver. Any subsystem that may be holding a data or function + * ptr into the driver must be cleared/deinitialized. + * + * Arguments: + * hw device structure + * Returns: + * 0 success + * >0 f/w reported error - f/w status code + * <0 driver reported error + * + * Side effects: + * + * Call context: + * process + *---------------------------------------------------------------- + */ int hfa384x_drvr_stop(struct hfa384x *hw) { int i; @@ -2545,26 +2581,27 @@ int hfa384x_drvr_stop(struct hfa384x *hw) } /*---------------------------------------------------------------- -* hfa384x_drvr_txframe -* -* Takes a frame from prism2sta and queues it for transmission. -* -* Arguments: -* hw device structure -* skb packet buffer struct. Contains an 802.11 -* data frame. -* p80211_hdr points to the 802.11 header for the packet. -* Returns: -* 0 Success and more buffs available -* 1 Success but no more buffs -* 2 Allocation failure -* 4 Buffer full or queue busy -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_drvr_txframe + * + * Takes a frame from prism2sta and queues it for transmission. + * + * Arguments: + * hw device structure + * skb packet buffer struct. Contains an 802.11 + * data frame. + * p80211_hdr points to the 802.11 header for the packet. + * Returns: + * 0 Success and more buffs available + * 1 Success but no more buffs + * 2 Allocation failure + * 4 Buffer full or queue busy + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ int hfa384x_drvr_txframe(struct hfa384x *hw, struct sk_buff *skb, union p80211_hdr *p80211_hdr, struct p80211_metawep *p80211_wep) @@ -2679,18 +2716,19 @@ void hfa384x_tx_timeout(struct wlandevice *wlandev) } /*---------------------------------------------------------------- -* hfa384x_usbctlx_reaper_task -* -* Tasklet to delete dead CTLX objects -* -* Arguments: -* data ptr to a struct hfa384x -* -* Returns: -* -* Call context: -* Interrupt -----------------------------------------------------------------*/ + * hfa384x_usbctlx_reaper_task + * + * Tasklet to delete dead CTLX objects + * + * Arguments: + * data ptr to a struct hfa384x + * + * Returns: + * + * Call context: + * Interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbctlx_reaper_task(unsigned long data) { struct hfa384x *hw = (struct hfa384x *)data; @@ -2711,19 +2749,20 @@ static void hfa384x_usbctlx_reaper_task(unsigned long data) } /*---------------------------------------------------------------- -* hfa384x_usbctlx_completion_task -* -* Tasklet to call completion handlers for returned CTLXs -* -* Arguments: -* data ptr to struct hfa384x -* -* Returns: -* Nothing -* -* Call context: -* Interrupt -----------------------------------------------------------------*/ + * hfa384x_usbctlx_completion_task + * + * Tasklet to call completion handlers for returned CTLXs + * + * Arguments: + * data ptr to struct hfa384x + * + * Returns: + * Nothing + * + * Call context: + * Interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbctlx_completion_task(unsigned long data) { struct hfa384x *hw = (struct hfa384x *)data; @@ -2784,22 +2823,23 @@ static void hfa384x_usbctlx_completion_task(unsigned long data) } /*---------------------------------------------------------------- -* unlocked_usbctlx_cancel_async -* -* Mark the CTLX dead asynchronously, and ensure that the -* next command on the queue is run afterwards. -* -* Arguments: -* hw ptr to the struct hfa384x structure -* ctlx ptr to a CTLX structure -* -* Returns: -* 0 the CTLX's URB is inactive -* -EINPROGRESS the URB is currently being unlinked -* -* Call context: -* Either process or interrupt, but presumably interrupt -----------------------------------------------------------------*/ + * unlocked_usbctlx_cancel_async + * + * Mark the CTLX dead asynchronously, and ensure that the + * next command on the queue is run afterwards. + * + * Arguments: + * hw ptr to the struct hfa384x structure + * ctlx ptr to a CTLX structure + * + * Returns: + * 0 the CTLX's URB is inactive + * -EINPROGRESS the URB is currently being unlinked + * + * Call context: + * Either process or interrupt, but presumably interrupt + *---------------------------------------------------------------- + */ static int unlocked_usbctlx_cancel_async(struct hfa384x *hw, struct hfa384x_usbctlx *ctlx) { @@ -2829,27 +2869,28 @@ static int unlocked_usbctlx_cancel_async(struct hfa384x *hw, } /*---------------------------------------------------------------- -* unlocked_usbctlx_complete -* -* A CTLX has completed. It may have been successful, it may not -* have been. At this point, the CTLX should be quiescent. The URBs -* aren't active and the timers should have been stopped. -* -* The CTLX is migrated to the "completing" queue, and the completing -* tasklet is scheduled. -* -* Arguments: -* hw ptr to a struct hfa384x structure -* ctlx ptr to a ctlx structure -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* Either, assume interrupt -----------------------------------------------------------------*/ + * unlocked_usbctlx_complete + * + * A CTLX has completed. It may have been successful, it may not + * have been. At this point, the CTLX should be quiescent. The URBs + * aren't active and the timers should have been stopped. + * + * The CTLX is migrated to the "completing" queue, and the completing + * tasklet is scheduled. + * + * Arguments: + * hw ptr to a struct hfa384x structure + * ctlx ptr to a ctlx structure + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * Either, assume interrupt + *---------------------------------------------------------------- + */ static void unlocked_usbctlx_complete(struct hfa384x *hw, struct hfa384x_usbctlx *ctlx) { @@ -2875,21 +2916,22 @@ static void unlocked_usbctlx_complete(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_usbctlxq_run -* -* Checks to see if the head item is running. If not, starts it. -* -* Arguments: -* hw ptr to struct hfa384x -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* any -----------------------------------------------------------------*/ + * hfa384x_usbctlxq_run + * + * Checks to see if the head item is running. If not, starts it. + * + * Arguments: + * hw ptr to struct hfa384x + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * any + *---------------------------------------------------------------- + */ static void hfa384x_usbctlxq_run(struct hfa384x *hw) { unsigned long flags; @@ -2975,21 +3017,22 @@ static void hfa384x_usbctlxq_run(struct hfa384x *hw) } /*---------------------------------------------------------------- -* hfa384x_usbin_callback -* -* Callback for URBs on the BULKIN endpoint. -* -* Arguments: -* urb ptr to the completed urb -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbin_callback + * + * Callback for URBs on the BULKIN endpoint. + * + * Arguments: + * urb ptr to the completed urb + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbin_callback(struct urb *urb) { struct wlandevice *wlandev = urb->context; @@ -3151,25 +3194,26 @@ static void hfa384x_usbin_callback(struct urb *urb) } /*---------------------------------------------------------------- -* hfa384x_usbin_ctlx -* -* We've received a URB containing a Prism2 "response" message. -* This message needs to be matched up with a CTLX on the active -* queue and our state updated accordingly. -* -* Arguments: -* hw ptr to struct hfa384x -* usbin ptr to USB IN packet -* urb_status status of this Bulk-In URB -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbin_ctlx + * + * We've received a URB containing a Prism2 "response" message. + * This message needs to be matched up with a CTLX on the active + * queue and our state updated accordingly. + * + * Arguments: + * hw ptr to struct hfa384x + * usbin ptr to USB IN packet + * urb_status status of this Bulk-In URB + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbin_ctlx(struct hfa384x *hw, union hfa384x_usbin *usbin, int urb_status) { @@ -3273,22 +3317,23 @@ static void hfa384x_usbin_ctlx(struct hfa384x *hw, union hfa384x_usbin *usbin, } /*---------------------------------------------------------------- -* hfa384x_usbin_txcompl -* -* At this point we have the results of a previous transmit. -* -* Arguments: -* wlandev wlan device -* usbin ptr to the usb transfer buffer -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbin_txcompl + * + * At this point we have the results of a previous transmit. + * + * Arguments: + * wlandev wlan device + * usbin ptr to the usb transfer buffer + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbin_txcompl(struct wlandevice *wlandev, union hfa384x_usbin *usbin) { @@ -3304,22 +3349,23 @@ static void hfa384x_usbin_txcompl(struct wlandevice *wlandev, } /*---------------------------------------------------------------- -* hfa384x_usbin_rx -* -* At this point we have a successful received a rx frame packet. -* -* Arguments: -* wlandev wlan device -* usbin ptr to the usb transfer buffer -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbin_rx + * + * At this point we have a successful received a rx frame packet. + * + * Arguments: + * wlandev wlan device + * usbin ptr to the usb transfer buffer + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbin_rx(struct wlandevice *wlandev, struct sk_buff *skb) { union hfa384x_usbin *usbin = (union hfa384x_usbin *)skb->data; @@ -3400,26 +3446,27 @@ static void hfa384x_usbin_rx(struct wlandevice *wlandev, struct sk_buff *skb) } /*---------------------------------------------------------------- -* hfa384x_int_rxmonitor -* -* Helper function for int_rx. Handles monitor frames. -* Note that this function allocates space for the FCS and sets it -* to 0xffffffff. The hfa384x doesn't give us the FCS value but the -* higher layers expect it. 0xffffffff is used as a flag to indicate -* the FCS is bogus. -* -* Arguments: -* wlandev wlan device structure -* rxfrm rx descriptor read from card in int_rx -* -* Returns: -* nothing -* -* Side effects: -* Allocates an skb and passes it up via the PF_PACKET interface. -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_int_rxmonitor + * + * Helper function for int_rx. Handles monitor frames. + * Note that this function allocates space for the FCS and sets it + * to 0xffffffff. The hfa384x doesn't give us the FCS value but the + * higher layers expect it. 0xffffffff is used as a flag to indicate + * the FCS is bogus. + * + * Arguments: + * wlandev wlan device structure + * rxfrm rx descriptor read from card in int_rx + * + * Returns: + * nothing + * + * Side effects: + * Allocates an skb and passes it up via the PF_PACKET interface. + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev, struct hfa384x_usb_rxfrm *rxfrm) { @@ -3478,7 +3525,8 @@ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev, } /* Copy the 802.11 header to the skb - (ctl frames may be less than a full header) */ + * (ctl frames may be less than a full header) + */ datap = skb_put(skb, hdrlen); memcpy(datap, &(rxdesc->frame_control), hdrlen); @@ -3505,22 +3553,23 @@ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev, } /*---------------------------------------------------------------- -* hfa384x_usbin_info -* -* At this point we have a successful received a Prism2 info frame. -* -* Arguments: -* wlandev wlan device -* usbin ptr to the usb transfer buffer -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbin_info + * + * At this point we have a successful received a Prism2 info frame. + * + * Arguments: + * wlandev wlan device + * usbin ptr to the usb transfer buffer + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbin_info(struct wlandevice *wlandev, union hfa384x_usbin *usbin) { @@ -3530,21 +3579,22 @@ static void hfa384x_usbin_info(struct wlandevice *wlandev, } /*---------------------------------------------------------------- -* hfa384x_usbout_callback -* -* Callback for URBs on the BULKOUT endpoint. -* -* Arguments: -* urb ptr to the completed urb -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbout_callback + * + * Callback for URBs on the BULKOUT endpoint. + * + * Arguments: + * urb ptr to the completed urb + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbout_callback(struct urb *urb) { struct wlandevice *wlandev = urb->context; @@ -3605,21 +3655,22 @@ static void hfa384x_usbout_callback(struct urb *urb) } /*---------------------------------------------------------------- -* hfa384x_ctlxout_callback -* -* Callback for control data on the BULKOUT endpoint. -* -* Arguments: -* urb ptr to the completed urb -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_ctlxout_callback + * + * Callback for control data on the BULKOUT endpoint. + * + * Arguments: + * urb ptr to the completed urb + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_ctlxout_callback(struct urb *urb) { struct hfa384x *hw = urb->context; @@ -3734,23 +3785,24 @@ static void hfa384x_ctlxout_callback(struct urb *urb) } /*---------------------------------------------------------------- -* hfa384x_usbctlx_reqtimerfn -* -* Timer response function for CTLX request timeouts. If this -* function is called, it means that the callback for the OUT -* URB containing a Prism2.x XXX_Request was never called. -* -* Arguments: -* data a ptr to the struct hfa384x -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbctlx_reqtimerfn + * + * Timer response function for CTLX request timeouts. If this + * function is called, it means that the callback for the OUT + * URB containing a Prism2.x XXX_Request was never called. + * + * Arguments: + * data a ptr to the struct hfa384x + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbctlx_reqtimerfn(unsigned long data) { struct hfa384x *hw = (struct hfa384x *)data; @@ -3792,23 +3844,24 @@ static void hfa384x_usbctlx_reqtimerfn(unsigned long data) } /*---------------------------------------------------------------- -* hfa384x_usbctlx_resptimerfn -* -* Timer response function for CTLX response timeouts. If this -* function is called, it means that the callback for the IN -* URB containing a Prism2.x XXX_Response was never called. -* -* Arguments: -* data a ptr to the struct hfa384x -* -* Returns: -* nothing -* -* Side effects: -* -* Call context: -* interrupt -----------------------------------------------------------------*/ + * hfa384x_usbctlx_resptimerfn + * + * Timer response function for CTLX response timeouts. If this + * function is called, it means that the callback for the IN + * URB containing a Prism2.x XXX_Response was never called. + * + * Arguments: + * data a ptr to the struct hfa384x + * + * Returns: + * nothing + * + * Side effects: + * + * Call context: + * interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usbctlx_resptimerfn(unsigned long data) { struct hfa384x *hw = (struct hfa384x *)data; @@ -3834,20 +3887,21 @@ static void hfa384x_usbctlx_resptimerfn(unsigned long data) } /*---------------------------------------------------------------- -* hfa384x_usb_throttlefn -* -* -* Arguments: -* data ptr to hw -* -* Returns: -* Nothing -* -* Side effects: -* -* Call context: -* Interrupt -----------------------------------------------------------------*/ + * hfa384x_usb_throttlefn + * + * + * Arguments: + * data ptr to hw + * + * Returns: + * Nothing + * + * Side effects: + * + * Call context: + * Interrupt + *---------------------------------------------------------------- + */ static void hfa384x_usb_throttlefn(unsigned long data) { struct hfa384x *hw = (struct hfa384x *)data; @@ -3873,23 +3927,24 @@ static void hfa384x_usb_throttlefn(unsigned long data) } /*---------------------------------------------------------------- -* hfa384x_usbctlx_submit -* -* Called from the doxxx functions to submit a CTLX to the queue -* -* Arguments: -* hw ptr to the hw struct -* ctlx ctlx structure to enqueue -* -* Returns: -* -ENODEV if the adapter is unplugged -* 0 -* -* Side effects: -* -* Call context: -* process or interrupt -----------------------------------------------------------------*/ + * hfa384x_usbctlx_submit + * + * Called from the doxxx functions to submit a CTLX to the queue + * + * Arguments: + * hw ptr to the hw struct + * ctlx ctlx structure to enqueue + * + * Returns: + * -ENODEV if the adapter is unplugged + * 0 + * + * Side effects: + * + * Call context: + * process or interrupt + *---------------------------------------------------------------- + */ static int hfa384x_usbctlx_submit(struct hfa384x *hw, struct hfa384x_usbctlx *ctlx) { @@ -3911,21 +3966,22 @@ static int hfa384x_usbctlx_submit(struct hfa384x *hw, } /*---------------------------------------------------------------- -* hfa384x_isgood_pdrcore -* -* Quick check of PDR codes. -* -* Arguments: -* pdrcode PDR code number (host order) -* -* Returns: -* zero not good. -* one is good. -* -* Side effects: -* -* Call context: -----------------------------------------------------------------*/ + * hfa384x_isgood_pdrcore + * + * Quick check of PDR codes. + * + * Arguments: + * pdrcode PDR code number (host order) + * + * Returns: + * zero not good. + * one is good. + * + * Side effects: + * + * Call context: + *---------------------------------------------------------------- + */ static int hfa384x_isgood_pdrcode(u16 pdrcode) { switch (pdrcode) { -- 1.9.1