Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752864AbcJKLPg (ORCPT ); Tue, 11 Oct 2016 07:15:36 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:46968 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751995AbcJKLPf (ORCPT ); Tue, 11 Oct 2016 07:15:35 -0400 From: Mark Brown To: Thor Thayer Cc: Mark Brown , broonie@kernel.org, andriy.shevchenko@linux.intel.com, jarkko.nikula@linux.intel.com, jszhang@marvell.com, michael@smart-africa.com, kernel@mseidel.net, linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org, tthayer@opensource.altera.com, linux-spi@vger.kernel.org In-Reply-To: <1476109525-21213-2-git-send-email-tthayer@opensource.altera.com> Message-Id: Date: Tue, 11 Oct 2016 12:30:41 +0200 X-SA-Exim-Connect-IP: 94.186.205.99 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "spi: dw: Set GPIO_SS flag to toggle Slave Select on GPIO CS" to the spi tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: No (on mezzanine.sirena.org.uk); Unknown failure Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2171 Lines: 64 The patch spi: dw: Set GPIO_SS flag to toggle Slave Select on GPIO CS has been applied to the spi tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 80b444e57948ea4bd5a89fb1f8c404ddab6c1973 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Mon, 10 Oct 2016 09:25:25 -0500 Subject: [PATCH] spi: dw: Set GPIO_SS flag to toggle Slave Select on GPIO CS The Designware SPI master requires slave selection before the transfer can begin [1]. This patch uses the new master flag to indicate both the GPIO CS and the internal chip select should be used. Tested On: Altera CycloneV development kit Compile tested for build errors on x86_64 (allyesconfigs) [1] DesignWare dw_apb_ssi Databook, Version 3.20a (page 39) Signed-off-by: Thor Thayer Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 27960e46135d..b715a26a9148 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -502,6 +502,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) master->handle_err = dw_spi_handle_err; master->max_speed_hz = dws->max_freq; master->dev.of_node = dev->of_node; + master->flags = SPI_MASTER_GPIO_SS; /* Basic HW init */ spi_hw_init(dev, dws); -- 2.9.3