Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754854AbcJLQDI (ORCPT ); Wed, 12 Oct 2016 12:03:08 -0400 Received: from us01smtprelay-2.synopsys.com ([198.182.60.111]:38944 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753673AbcJLQCx (ORCPT ); Wed, 12 Oct 2016 12:02:53 -0400 From: Ramiro Oliveira To: linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, mark.rutland@arm.com, mchehab@kernel.org, davem@davemloft.net, geert@linux-m68k.org, akpm@linux-foundation.org, kvalo@codeaurora.org, linux@roeck-us.net, hverkuil@xs4all.nl, lars@metafoo.de, pavel@ucw.cz, robert.jarzmik@free.fr, slongerbeam@gmail.com, dheitmueller@kernellabs.com, pali.rohar@gmail.com, CARLOS.PALMINHA@synopsys.com, Ramiro Oliveira Subject: [PATCH v3 1/2] Add OV5647 device tree documentation Date: Wed, 12 Oct 2016 17:02:21 +0100 Message-Id: <0f85bdabe4951533e6fe7a842cc5dfa0f2cd8a6c.1476286687.git.roliveir@synopsys.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1225 Lines: 34 Signed-off-by: Ramiro Oliveira --- .../devicetree/bindings/media/i2c/ov5647.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt new file mode 100644 index 0000000..4c91b3b --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt @@ -0,0 +1,19 @@ +Omnivision OV5647 raw image sensor +--------------------------------- + +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "ovti,ov5647"; +- reg : I2C slave address of the sensor; + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The OV5647 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Following properties are valid for the endpoint node: + +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in + video-interfaces.txt. The sensor supports only two data lanes. -- 2.9.3