Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932417AbcJNSKl (ORCPT ); Fri, 14 Oct 2016 14:10:41 -0400 Received: from userp1040.oracle.com ([156.151.31.81]:44185 "EHLO userp1040.oracle.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754157AbcJNSKZ (ORCPT ); Fri, 14 Oct 2016 14:10:25 -0400 From: Boris Ostrovsky To: david.vrabel@citrix.com, JGross@suse.com Cc: roger.pau@citrix.com, linux-kernel@vger.kernel.org, xen-devel@lists.xenproject.org, Boris Ostrovsky Subject: [PATCH 1/8] xen/x86: Remove PVH support Date: Fri, 14 Oct 2016 14:05:11 -0400 Message-Id: <1476468318-24422-2-git-send-email-boris.ostrovsky@oracle.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1476468318-24422-1-git-send-email-boris.ostrovsky@oracle.com> References: <1476468318-24422-1-git-send-email-boris.ostrovsky@oracle.com> X-Source-IP: userv0022.oracle.com [156.151.31.74] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18953 Lines: 574 We are replacing existing PVH guests with new implementation. Signed-off-by: Boris Ostrovsky --- arch/x86/xen/enlighten.c | 140 ++++++--------------------------------- arch/x86/xen/mmu.c | 21 +----- arch/x86/xen/setup.c | 37 +---------- arch/x86/xen/smp.c | 78 ++++++++-------------- arch/x86/xen/smp.h | 8 --- arch/x86/xen/xen-head.S | 62 ++--------------- arch/x86/xen/xen-ops.h | 1 - drivers/xen/events/events_base.c | 1 - include/xen/xen.h | 13 +--- 9 files changed, 54 insertions(+), 307 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c0fdd57..dc4ed0c 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1149,10 +1149,11 @@ void xen_setup_vcpu_info_placement(void) xen_vcpu_setup(cpu); } - /* xen_vcpu_setup managed to place the vcpu_info within the - * percpu area for all cpus, so make use of it. Note that for - * PVH we want to use native IRQ mechanism. */ - if (have_vcpu_info_placement && !xen_pvh_domain()) { + /* + * xen_vcpu_setup managed to place the vcpu_info within the + * percpu area for all cpus, so make use of it. + */ + if (have_vcpu_info_placement) { pv_irq_ops.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct); pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(xen_restore_fl_direct); pv_irq_ops.irq_disable = __PV_IS_CALLEE_SAVE(xen_irq_disable_direct); @@ -1426,49 +1427,9 @@ static void __init xen_boot_params_init_edd(void) * Set up the GDT and segment registers for -fstack-protector. Until * we do this, we have to be careful not to call any stack-protected * function, which is most of the kernel. - * - * Note, that it is __ref because the only caller of this after init - * is PVH which is not going to use xen_load_gdt_boot or other - * __init functions. */ -static void __ref xen_setup_gdt(int cpu) +static void xen_setup_gdt(int cpu) { - if (xen_feature(XENFEAT_auto_translated_physmap)) { -#ifdef CONFIG_X86_64 - unsigned long dummy; - - load_percpu_segment(cpu); /* We need to access per-cpu area */ - switch_to_new_gdt(cpu); /* GDT and GS set */ - - /* We are switching of the Xen provided GDT to our HVM mode - * GDT. The new GDT has __KERNEL_CS with CS.L = 1 - * and we are jumping to reload it. - */ - asm volatile ("pushq %0\n" - "leaq 1f(%%rip),%0\n" - "pushq %0\n" - "lretq\n" - "1:\n" - : "=&r" (dummy) : "0" (__KERNEL_CS)); - - /* - * While not needed, we also set the %es, %ds, and %fs - * to zero. We don't care about %ss as it is NULL. - * Strictly speaking this is not needed as Xen zeros those - * out (and also MSR_FS_BASE, MSR_GS_BASE, MSR_KERNEL_GS_BASE) - * - * Linux zeros them in cpu_init() and in secondary_startup_64 - * (for BSP). - */ - loadsegment(es, 0); - loadsegment(ds, 0); - loadsegment(fs, 0); -#else - /* PVH: TODO Implement. */ - BUG(); -#endif - return; /* PVH does not need any PV GDT ops. */ - } pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot; pv_cpu_ops.load_gdt = xen_load_gdt_boot; @@ -1479,59 +1440,6 @@ static void __ref xen_setup_gdt(int cpu) pv_cpu_ops.load_gdt = xen_load_gdt; } -#ifdef CONFIG_XEN_PVH -/* - * A PV guest starts with default flags that are not set for PVH, set them - * here asap. - */ -static void xen_pvh_set_cr_flags(int cpu) -{ - - /* Some of these are setup in 'secondary_startup_64'. The others: - * X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests - * (which PVH shared codepaths), while X86_CR0_PG is for PVH. */ - write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM); - - if (!cpu) - return; - /* - * For BSP, PSE PGE are set in probe_page_size_mask(), for APs - * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu__init_cpu(). - */ - if (boot_cpu_has(X86_FEATURE_PSE)) - cr4_set_bits_and_update_boot(X86_CR4_PSE); - - if (boot_cpu_has(X86_FEATURE_PGE)) - cr4_set_bits_and_update_boot(X86_CR4_PGE); -} - -/* - * Note, that it is ref - because the only caller of this after init - * is PVH which is not going to use xen_load_gdt_boot or other - * __init functions. - */ -void __ref xen_pvh_secondary_vcpu_init(int cpu) -{ - xen_setup_gdt(cpu); - xen_pvh_set_cr_flags(cpu); -} - -static void __init xen_pvh_early_guest_init(void) -{ - if (!xen_feature(XENFEAT_auto_translated_physmap)) - return; - - BUG_ON(!xen_feature(XENFEAT_hvm_callback_vector)); - - xen_pvh_early_cpu_init(0, false); - xen_pvh_set_cr_flags(0); - -#ifdef CONFIG_X86_32 - BUG(); /* PVH: Implement proper support. */ -#endif -} -#endif /* CONFIG_XEN_PVH */ - static void __init xen_dom0_set_legacy_features(void) { x86_platform.legacy.rtc = 1; @@ -1568,24 +1476,17 @@ asmlinkage __visible void __init xen_start_kernel(void) xen_domain_type = XEN_PV_DOMAIN; xen_setup_features(); -#ifdef CONFIG_XEN_PVH - xen_pvh_early_guest_init(); -#endif + xen_setup_machphys_mapping(); /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; - if (!xen_pvh_domain()) { - pv_cpu_ops = xen_cpu_ops; + pv_cpu_ops = xen_cpu_ops; - x86_platform.get_nmi_reason = xen_get_nmi_reason; - } + x86_platform.get_nmi_reason = xen_get_nmi_reason; - if (xen_feature(XENFEAT_auto_translated_physmap)) - x86_init.resources.memory_setup = xen_auto_xlated_memory_setup; - else - x86_init.resources.memory_setup = xen_memory_setup; + x86_init.resources.memory_setup = xen_memory_setup; x86_init.oem.arch_setup = xen_arch_setup; x86_init.oem.banner = xen_banner; @@ -1678,18 +1579,15 @@ asmlinkage __visible void __init xen_start_kernel(void) /* set the limit of our address space */ xen_reserve_top(); - /* PVH: runs at default kernel iopl of 0 */ - if (!xen_pvh_domain()) { - /* - * We used to do this in xen_arch_setup, but that is too late - * on AMD were early_cpu_init (run before ->arch_setup()) calls - * early_amd_init which pokes 0xcf8 port. - */ - set_iopl.iopl = 1; - rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); - if (rc != 0) - xen_raw_printk("physdev_op failed %d\n", rc); - } + /* + * We used to do this in xen_arch_setup, but that is too late + * on AMD were early_cpu_init (run before ->arch_setup()) calls + * early_amd_init which pokes 0xcf8 port. + */ + set_iopl.iopl = 1; + rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); + if (rc != 0) + xen_raw_printk("physdev_op failed %d\n", rc); #ifdef CONFIG_X86_32 /* set up basic CPUID stuff */ diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 7d5afdb..f6740b5 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1792,10 +1792,6 @@ static void __init set_page_prot_flags(void *addr, pgprot_t prot, unsigned long pfn = __pa(addr) >> PAGE_SHIFT; pte_t pte = pfn_pte(pfn, prot); - /* For PVH no need to set R/O or R/W to pin them or unpin them. */ - if (xen_feature(XENFEAT_auto_translated_physmap)) - return; - if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, flags)) BUG(); } @@ -1902,8 +1898,7 @@ static void __init check_pt_base(unsigned long *pt_base, unsigned long *pt_end, * level2_ident_pgt, and level2_kernel_pgt. This means that only the * kernel has a physical mapping to start with - but that's enough to * get __va working. We need to fill in the rest of the physical - * mapping once some sort of allocator has been set up. NOTE: for - * PVH, the page tables are native. + * mapping once some sort of allocator has been set up. */ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) { @@ -2812,16 +2807,6 @@ static int do_remap_gfn(struct vm_area_struct *vma, BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_IO)) == (VM_PFNMAP | VM_IO))); - if (xen_feature(XENFEAT_auto_translated_physmap)) { -#ifdef CONFIG_XEN_PVH - /* We need to update the local page tables and the xen HAP */ - return xen_xlate_remap_gfn_array(vma, addr, gfn, nr, err_ptr, - prot, domid, pages); -#else - return -EINVAL; -#endif - } - rmd.mfn = gfn; rmd.prot = prot; /* We use the err_ptr to indicate if there we are doing a contiguous @@ -2915,10 +2900,6 @@ int xen_unmap_domain_gfn_range(struct vm_area_struct *vma, if (!pages || !xen_feature(XENFEAT_auto_translated_physmap)) return 0; -#ifdef CONFIG_XEN_PVH - return xen_xlate_unmap_gfn_range(vma, numpgs, pages); -#else return -EINVAL; -#endif } EXPORT_SYMBOL_GPL(xen_unmap_domain_gfn_range); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index f8960fc..6999016 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -915,39 +915,6 @@ char * __init xen_memory_setup(void) } /* - * Machine specific memory setup for auto-translated guests. - */ -char * __init xen_auto_xlated_memory_setup(void) -{ - struct xen_memory_map memmap; - int i; - int rc; - - memmap.nr_entries = E820MAX; - set_xen_guest_handle(memmap.buffer, xen_e820_map); - - rc = HYPERVISOR_memory_op(XENMEM_memory_map, &memmap); - if (rc < 0) - panic("No memory map (%d)\n", rc); - - xen_e820_map_entries = memmap.nr_entries; - - sanitize_e820_map(xen_e820_map, ARRAY_SIZE(xen_e820_map), - &xen_e820_map_entries); - - for (i = 0; i < xen_e820_map_entries; i++) - e820_add_region(xen_e820_map[i].addr, xen_e820_map[i].size, - xen_e820_map[i].type); - - /* Remove p2m info, it is not needed. */ - xen_start_info->mfn_list = 0; - xen_start_info->first_p2m_pfn = 0; - xen_start_info->nr_p2m_frames = 0; - - return "Xen"; -} - -/* * Set the bit indicating "nosegneg" library variants should be used. * We only need to bother in pure 32-bit mode; compat 32-bit processes * can have un-truncated segments, so wrapping around is allowed. @@ -1032,8 +999,8 @@ void __init xen_pvmmu_arch_setup(void) void __init xen_arch_setup(void) { xen_panic_handler_init(); - if (!xen_feature(XENFEAT_auto_translated_physmap)) - xen_pvmmu_arch_setup(); + + xen_pvmmu_arch_setup(); #ifdef CONFIG_ACPI if (!(xen_start_info->flags & SIF_INITDOMAIN)) { diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 9fa27ce..914e320 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -105,18 +105,8 @@ static void cpu_bringup(void) local_irq_enable(); } -/* - * Note: cpu parameter is only relevant for PVH. The reason for passing it - * is we can't do smp_processor_id until the percpu segments are loaded, for - * which we need the cpu number! So we pass it in rdi as first parameter. - */ -asmlinkage __visible void cpu_bringup_and_idle(int cpu) +asmlinkage __visible void cpu_bringup_and_idle(void) { -#ifdef CONFIG_XEN_PVH - if (xen_feature(XENFEAT_auto_translated_physmap) && - xen_feature(XENFEAT_supervisor_mode_kernel)) - xen_pvh_secondary_vcpu_init(cpu); -#endif cpu_bringup(); cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); } @@ -410,61 +400,47 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) gdt = get_cpu_gdt_table(cpu); #ifdef CONFIG_X86_32 - /* Note: PVH is not yet supported on x86_32. */ ctxt->user_regs.fs = __KERNEL_PERCPU; ctxt->user_regs.gs = __KERNEL_STACK_CANARY; #endif memset(&ctxt->fpu_ctxt, 0, sizeof(ctxt->fpu_ctxt)); - if (!xen_feature(XENFEAT_auto_translated_physmap)) { - ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle; - ctxt->flags = VGCF_IN_KERNEL; - ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */ - ctxt->user_regs.ds = __USER_DS; - ctxt->user_regs.es = __USER_DS; - ctxt->user_regs.ss = __KERNEL_DS; + ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle; + ctxt->flags = VGCF_IN_KERNEL; + ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */ + ctxt->user_regs.ds = __USER_DS; + ctxt->user_regs.es = __USER_DS; + ctxt->user_regs.ss = __KERNEL_DS; - xen_copy_trap_info(ctxt->trap_ctxt); + xen_copy_trap_info(ctxt->trap_ctxt); - ctxt->ldt_ents = 0; + ctxt->ldt_ents = 0; - BUG_ON((unsigned long)gdt & ~PAGE_MASK); + BUG_ON((unsigned long)gdt & ~PAGE_MASK); - gdt_mfn = arbitrary_virt_to_mfn(gdt); - make_lowmem_page_readonly(gdt); - make_lowmem_page_readonly(mfn_to_virt(gdt_mfn)); + gdt_mfn = arbitrary_virt_to_mfn(gdt); + make_lowmem_page_readonly(gdt); + make_lowmem_page_readonly(mfn_to_virt(gdt_mfn)); - ctxt->gdt_frames[0] = gdt_mfn; - ctxt->gdt_ents = GDT_ENTRIES; + ctxt->gdt_frames[0] = gdt_mfn; + ctxt->gdt_ents = GDT_ENTRIES; - ctxt->kernel_ss = __KERNEL_DS; - ctxt->kernel_sp = idle->thread.sp0; + ctxt->kernel_ss = __KERNEL_DS; + ctxt->kernel_sp = idle->thread.sp0; #ifdef CONFIG_X86_32 - ctxt->event_callback_cs = __KERNEL_CS; - ctxt->failsafe_callback_cs = __KERNEL_CS; + ctxt->event_callback_cs = __KERNEL_CS; + ctxt->failsafe_callback_cs = __KERNEL_CS; #else - ctxt->gs_base_kernel = per_cpu_offset(cpu); -#endif - ctxt->event_callback_eip = - (unsigned long)xen_hypervisor_callback; - ctxt->failsafe_callback_eip = - (unsigned long)xen_failsafe_callback; - ctxt->user_regs.cs = __KERNEL_CS; - per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir); - } -#ifdef CONFIG_XEN_PVH - else { - /* - * The vcpu comes on kernel page tables which have the NX pte - * bit set. This means before DS/SS is touched, NX in - * EFER must be set. Hence the following assembly glue code. - */ - ctxt->user_regs.eip = (unsigned long)xen_pvh_early_cpu_init; - ctxt->user_regs.rdi = cpu; - ctxt->user_regs.rsi = true; /* entry == true */ - } + ctxt->gs_base_kernel = per_cpu_offset(cpu); #endif + ctxt->event_callback_eip = + (unsigned long)xen_hypervisor_callback; + ctxt->failsafe_callback_eip = + (unsigned long)xen_failsafe_callback; + ctxt->user_regs.cs = __KERNEL_CS; + per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir); + ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs); ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_gfn(swapper_pg_dir)); if (HYPERVISOR_vcpu_op(VCPUOP_initialise, xen_vcpu_nr(cpu), ctxt)) diff --git a/arch/x86/xen/smp.h b/arch/x86/xen/smp.h index c5c16dc..9beef33 100644 --- a/arch/x86/xen/smp.h +++ b/arch/x86/xen/smp.h @@ -21,12 +21,4 @@ static inline int xen_smp_intr_init(unsigned int cpu) static inline void xen_smp_intr_free(unsigned int cpu) {} #endif /* CONFIG_SMP */ -#ifdef CONFIG_XEN_PVH -extern void xen_pvh_early_cpu_init(int cpu, bool entry); -#else -static inline void xen_pvh_early_cpu_init(int cpu, bool entry) -{ -} -#endif - #endif diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 7f8d8ab..37794e4 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -16,25 +16,6 @@ #include #include -#ifdef CONFIG_XEN_PVH -#define PVH_FEATURES_STR "|writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel" -/* Note the lack of 'hvm_callback_vector'. Older hypervisor will - * balk at this being part of XEN_ELFNOTE_FEATURES, so we put it in - * XEN_ELFNOTE_SUPPORTED_FEATURES which older hypervisors will ignore. - */ -#define PVH_FEATURES ((1 << XENFEAT_writable_page_tables) | \ - (1 << XENFEAT_auto_translated_physmap) | \ - (1 << XENFEAT_supervisor_mode_kernel) | \ - (1 << XENFEAT_hvm_callback_vector)) -/* The XENFEAT_writable_page_tables is not stricly necessary as we set that - * up regardless whether this CONFIG option is enabled or not, but it - * clarifies what the right flags need to be. - */ -#else -#define PVH_FEATURES_STR "" -#define PVH_FEATURES (0) -#endif - __INIT ENTRY(startup_xen) cld @@ -54,41 +35,6 @@ ENTRY(startup_xen) __FINIT -#ifdef CONFIG_XEN_PVH -/* - * xen_pvh_early_cpu_init() - early PVH VCPU initialization - * @cpu: this cpu number (%rdi) - * @entry: true if this is a secondary vcpu coming up on this entry - * point, false if this is the boot CPU being initialized for - * the first time (%rsi) - * - * Note: This is called as a function on the boot CPU, and is the entry point - * on the secondary CPU. - */ -ENTRY(xen_pvh_early_cpu_init) - mov %rsi, %r11 - - /* Gather features to see if NX implemented. */ - mov $0x80000001, %eax - cpuid - mov %edx, %esi - - mov $MSR_EFER, %ecx - rdmsr - bts $_EFER_SCE, %eax - - bt $20, %esi - jnc 1f /* No NX, skip setting it */ - bts $_EFER_NX, %eax -1: wrmsr -#ifdef CONFIG_SMP - cmp $0, %r11b - jne cpu_bringup_and_idle -#endif - ret - -#endif /* CONFIG_XEN_PVH */ - .pushsection .text .balign PAGE_SIZE ENTRY(hypercall_page) @@ -114,10 +60,10 @@ ENTRY(hypercall_page) #endif ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, _ASM_PTR startup_xen) ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, _ASM_PTR hypercall_page) - ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .ascii "!writable_page_tables|pae_pgdir_above_4gb"; .asciz PVH_FEATURES_STR) - ELFNOTE(Xen, XEN_ELFNOTE_SUPPORTED_FEATURES, .long (PVH_FEATURES) | - (1 << XENFEAT_writable_page_tables) | - (1 << XENFEAT_dom0)) + ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, + .ascii "!writable_page_tables|pae_pgdir_above_4gb") + ELFNOTE(Xen, XEN_ELFNOTE_SUPPORTED_FEATURES, + .long (1 << XENFEAT_writable_page_tables) | (1 << XENFEAT_dom0)) ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID, diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 3cbce3b..3688ecc 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -146,5 +146,4 @@ static inline void __init xen_efi_init(void) extern int xen_panic_handler_init(void); -void xen_pvh_secondary_vcpu_init(int cpu); #endif /* XEN_OPS_H */ diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 9ecfcdc..6a0aa5c 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -1706,7 +1706,6 @@ void __init xen_init_IRQ(void) pirq_eoi_map = (void *)__get_free_page(GFP_KERNEL|__GFP_ZERO); eoi_gmfn.gmfn = virt_to_gfn(pirq_eoi_map); rc = HYPERVISOR_physdev_op(PHYSDEVOP_pirq_eoi_gmfn_v2, &eoi_gmfn); - /* TODO: No PVH support for PIRQ EOI */ if (rc != 0) { free_page((unsigned long) pirq_eoi_map); pirq_eoi_map = NULL; diff --git a/include/xen/xen.h b/include/xen/xen.h index f0f0252..d0f9684 100644 --- a/include/xen/xen.h +++ b/include/xen/xen.h @@ -29,17 +29,6 @@ enum xen_domain_type { #define xen_initial_domain() (0) #endif /* CONFIG_XEN_DOM0 */ -#ifdef CONFIG_XEN_PVH -/* This functionality exists only for x86. The XEN_PVHVM support exists - * only in x86 world - hence on ARM it will be always disabled. - * N.B. ARM guests are neither PV nor HVM nor PVHVM. - * It's a bit like PVH but is different also (it's further towards the H - * end of the spectrum than even PVH). - */ -#include -#define xen_pvh_domain() (xen_pv_domain() && \ - xen_feature(XENFEAT_auto_translated_physmap)) -#else #define xen_pvh_domain() (0) -#endif + #endif /* _XEN_XEN_H */ -- 1.8.3.1