Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965079AbcJQQlu (ORCPT ); Mon, 17 Oct 2016 12:41:50 -0400 Received: from relay1.sgi.com ([192.48.180.66]:55121 "EHLO relay.sgi.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964878AbcJQQlm (ORCPT ); Mon, 17 Oct 2016 12:41:42 -0400 Date: Mon, 17 Oct 2016 11:41:40 -0500 From: Nathan Zimmer To: Sean Young Cc: Nathan Zimmer , linux-kernel@vger.kernel.org, linux-serial@vgr.kernel.org, gregkh@linuxfoundation.org, alan@linux.intel.com Subject: Re: console issue since 3.6, console=ttyS1 hangs Message-ID: <20161017164140.GA35950@stormcage.americas.sgi.com> References: <20161017144951.GA235535@stormcage.americas.sgi.com> <20161017151906.GA19082@gofer.mess.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20161017151906.GA19082@gofer.mess.org> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1341 Lines: 38 Ok I'll get that sometime tomorrow. Right now they pulled it down maintenance... On Mon, Oct 17, 2016 at 04:19:07PM +0100, Sean Young wrote: > On Mon, Oct 17, 2016 at 09:49:51AM -0500, Nathan Zimmer wrote: > > A cluster client recently tried to update from Sles11 to Sles12 and found in > > some cases the boxes would hang in early boot. It came down to console=ttyS1 > > on the command line. After a bisection I found it happended in here: > > > > commit 835d844d1a28efba81d5aca7385e24c29d3a6db2 > > Author: Sean Young > > Date: Fri Sep 7 19:06:23 2012 +0100 > > > > 8250_pnp: do pnp probe before legacy probe > > > > > > I found I can revert the part of the patch in 8250.c (now 8250_core.c) and > > the hangs do not happen. > > > > Bios of the offending box ( I don't know if there a bios update ) > > Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc. > > BIOS Date: 02/05/2014 13:45:09 > > Ver: ma2e2054.16I > > > > I don't have much more info but will collect anything that is asked. > > Any help would be appeciated. > > The console output would be helpful (both before 3.6 and with 3.6). It > could be that what the bios provides in pnp does not match the actual > config. > > The output of: > > cat /sys/bus/pnp/drivers/serial/*/resources > > Would be helpful, thanks. > > > Sean