Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030434AbcJQQyz (ORCPT ); Mon, 17 Oct 2016 12:54:55 -0400 Received: from mailapp02.imgtec.com ([217.156.133.132]:3864 "EHLO mailapp01.imgtec.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1030284AbcJQQxN (ORCPT ); Mon, 17 Oct 2016 12:53:13 -0400 From: Zubair Lutfullah Kakakhel To: , , , , , , CC: , , , , , , , Subject: [Patch v5 10/12] MIPS: xilfpga: Add DT node for AXI I2C Date: Mon, 17 Oct 2016 17:52:54 +0100 Message-ID: <1476723176-39891-11-git-send-email-Zubair.Kakakhel@imgtec.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1476723176-39891-1-git-send-email-Zubair.Kakakhel@imgtec.com> References: <1476723176-39891-1-git-send-email-Zubair.Kakakhel@imgtec.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [192.168.154.45] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1312 Lines: 56 The xilfpga platform has an AXI I2C Bus master with a temperature sensor connected to it. Add the device tree node to use them. Signed-off-by: Zubair Lutfullah Kakakhel --- V3 -> V4 changed compatible string from "adt7420" to "adi,adt7420" V2 -> V3 No change V1 -> V2 No change --- arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts index d285c8d..f5ebab8 100644 --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts @@ -54,6 +54,28 @@ interrupt-parent = <&axi_intc>; interrupts = <0>; }; + + axi_i2c: i2c@10A00000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&axi_intc>; + interrupts = <4>; + reg = < 0x10A00000 0x10000 >; + clocks = <&ext>; + xlnx,clk-freq = <0x5f5e100>; + xlnx,family = "Artix7"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x0>; + xlnx,sda-inertial-delay = <0x0>; + xlnx,ten-bit-adr = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + ad7420@4B { + compatible = "adi,adt7420"; + reg = <0x4B>; + }; + } ; }; &ext { -- 1.9.1