Subject: Re: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings
Mime-Version: 1.0 (Mac OS X Mail 9.3 \(3124\))
Content-Type: text/plain; charset=windows-1252
From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
In-Reply-To: <83dc46b5-9c37-2813-0eca-267250e7cf2e@axentia.se>
Date: Mon, 17 Oct 2016 22:11:33 +0300
Cc: Lee Jones <lee.jones@linaro.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Alexandre Courbot <gnurou@gmail.com>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Frank Rowand <frowand.list@gmail.com>,
        Wolfram Sang <wsa@the-dreams.de>, Richard Purdie <rpurdie@rpsys.net>,
        Jacek Anaszewski <j.anaszewski@samsung.com>,
        Jean Delvare <jdelvare@suse.com>,
        Avirup Banerjee <abanerjee@juniper.net>,
        Georgi Vlaev <gvlaev@juniper.net>, Guenter Roeck <linux@roeck-us.net>,
        JawaharBalaji Thirumalaisamy <jawaharb@juniper.net>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org,
        linux-leds@vger.kernel.org, linux-hwmon@vger.kernel.org
Message-Id: <504DF5C6-3C55-4E65-A855-8C2C0F32F2C3@konsulko.com>
References: <1475853669-22480-1-git-send-email-pantelis.antoniou@konsulko.com> <1475853669-22480-5-git-send-email-pantelis.antoniou@konsulko.com> <83dc46b5-9c37-2813-0eca-267250e7cf2e@axentia.se>
To: Peter Rosin <peda@axentia.se>
Sender: linux-kernel-owner@vger.kernel.org
Content-Transfer-Encoding: 8bit
Content-Length: 2069
Lines: 88

Hi Rob,

> On Oct 10, 2016, at 18:48 , Peter Rosin <peda@axentia.se> wrote:
> 
> On 2016-10-07 17:21, Pantelis Antoniou wrote:
>> From: Georgi Vlaev <gvlaev@juniper.net>
>> 
>> Add binding document for the i2c mux driver of Juniper's I2CS FPGA.
>> 
>> Signed-off-by: Georgi Vlaev <gvlaev@juniper.net>
>> [Ported from Juniper kernel]
>> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
>> ---
>> .../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt   | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
>> 
>> diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
>> new file mode 100644
>> index 0000000..03d917f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
>> @@ -0,0 +1,27 @@
>> +* Juniper I2C Mux on I2CS
>> +
>> +	I2C mux driver for switching the RE access to the FPC i2c bus.
>> +	Compatible with the FPC variant of the I2CS.
>> +
>> +Required properties:
>> +
>> +  - compatible: "jnx,i2cs-mux-i2cs".
> 
> jnx,i2c-mux-i2cs
> 

OK.

>> +
>> +The following required properties are defined externally:
>> +
>> +  - Standard I2C mux properties. See i2c-mux.txt in this directory.
> 
> To accommodate changes pending for 4.9, change "mux" to "gate" in
> this line?
> 

OK, interesting.


>> +  - I2C child bus nodes. See i2c-mux.txt in this directory.
> 
> This line is wrong since the child nodes themselves are optional in
> i2c-gate.txt (and i2c-mux.txt). I guess you can just drop it since
> the child nodes are mentioned in i2c-gate.txt (and i2c-mux.txt).
> 

OK then.

>> +
>> +Example:
>> +
>> +fpc0_mux {
>> +	compatible = "jnx,i2c-mux-i2cs";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
> 
> ...drop these two...
> 
>> +
>> +	fpc0i2c0: i2c@0 {
> 
> ...change i2c@0 to i2c-gate...
> 
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		reg = <0>;
> 
> ...and drop reg.
> 
> Cheers,
> Peter
> 

OK on all.

>> +	};
>> +};