Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761384AbcJRNio (ORCPT ); Tue, 18 Oct 2016 09:38:44 -0400 Received: from us01smtprelay-2.synopsys.com ([198.182.47.9]:42056 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753969AbcJRNie (ORCPT ); Tue, 18 Oct 2016 09:38:34 -0400 Subject: Re: [PATCH v3 1/2] Add OV5647 device tree documentation To: Rob Herring References: <0f85bdabe4951533e6fe7a842cc5dfa0f2cd8a6c.1476286687.git.roliveir@synopsys.com> <20161018131434.2bbk2evxkv7mutfo@rob-hp-laptop> CC: , , , , , , , , , , , , , , , , , From: Ramiro Oliveira Message-ID: <7a228213-bbd1-8eb4-6d8b-123b3b6e215f@synopsys.com> Date: Tue, 18 Oct 2016 14:38:20 +0100 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:45.0) Gecko/20100101 Thunderbird/45.3.0 MIME-Version: 1.0 In-Reply-To: <20161018131434.2bbk2evxkv7mutfo@rob-hp-laptop> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit X-Originating-IP: [10.107.25.125] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1619 Lines: 43 On 10/18/2016 2:14 PM, Rob Herring wrote: > On Wed, Oct 12, 2016 at 05:02:21PM +0100, Ramiro Oliveira wrote: >> Signed-off-by: Ramiro Oliveira >> --- >> .../devicetree/bindings/media/i2c/ov5647.txt | 19 +++++++++++++++++++ >> 1 file changed, 19 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt >> new file mode 100644 >> index 0000000..4c91b3b >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt >> @@ -0,0 +1,19 @@ >> +Omnivision OV5647 raw image sensor >> +--------------------------------- >> + >> +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces >> +and CCI (I2C compatible) control bus. >> + >> +Required properties: >> + >> +- compatible : "ovti,ov5647"; >> +- reg : I2C slave address of the sensor; >> + >> +The common video interfaces bindings (see video-interfaces.txt) should be >> +used to specify link to the image data receiver. The OV5647 device >> +node should contain one 'port' child node with an 'endpoint' subnode. >> + >> +Following properties are valid for the endpoint node: >> + >> +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in >> + video-interfaces.txt. The sensor supports only two data lanes. > What's the default if not present? Since the sensor only supports 2 data lanes, this information will not be used, even if it is available in the DT. So the default will be 2. > >> -- >> 2.9.3 >> >>