Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030375AbcJRQGs (ORCPT ); Tue, 18 Oct 2016 12:06:48 -0400 Received: from foss.arm.com ([217.140.101.70]:35292 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030487AbcJRQEL (ORCPT ); Tue, 18 Oct 2016 12:04:11 -0400 From: Lorenzo Pieralisi To: iommu@lists.linux-foundation.org Cc: Lorenzo Pieralisi , Bjorn Helgaas , Robin Murphy , Tomasz Nowicki , Joerg Roedel , "Rafael J. Wysocki" , Will Deacon , Marc Zyngier , Hanjun Guo , Jon Masters , Eric Auger , Sinan Kaya , Nate Watterson , Prem Mallappa , Dennis Chen , linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 07/16] drivers: acpi: implement acpi_dma_configure Date: Tue, 18 Oct 2016 17:04:05 +0100 Message-Id: <20161018160414.1228-8-lorenzo.pieralisi@arm.com> X-Mailer: git-send-email 2.10.0 In-Reply-To: <20161018160414.1228-1-lorenzo.pieralisi@arm.com> References: <20161018160414.1228-1-lorenzo.pieralisi@arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5667 Lines: 158 On DT based systems, the of_dma_configure() API implements DMA configuration for a given device. On ACPI systems an API equivalent to of_dma_configure() is missing which implies that it is currently not possible to set-up DMA operations for devices through the ACPI generic kernel layer. This patch fills the gap by introducing acpi_dma_configure/deconfigure() calls that for now are just wrappers around arch_setup_dma_ops() and arch_teardown_dma_ops() and also updates ACPI and PCI core code to use the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions. Since acpi_dma_configure() is used to configure DMA operations, the function initializes the dma/coherent_dma masks to sane default values if the current masks are uninitialized (also to keep the default values consistent with DT systems) to make sure the device has a complete default DMA set-up. The DMA range size passed to arch_setup_dma_ops() is sized according to the device coherent_dma_mask (starting at address 0x0), mirroring the DT probing path behaviour when a dma-ranges property is not provided for the device being probed; this changes the current arch_setup_dma_ops() call parameters in the ACPI probing case, but since arch_setup_dma_ops() is a NOP on all architectures but ARM/ARM64 this patch does not change the current kernel behaviour on them. Signed-off-by: Lorenzo Pieralisi Acked-by: Bjorn Helgaas [pci] Cc: Bjorn Helgaas Cc: Robin Murphy Cc: Tomasz Nowicki Cc: Joerg Roedel Cc: "Rafael J. Wysocki" --- drivers/acpi/glue.c | 4 ++-- drivers/acpi/scan.c | 40 ++++++++++++++++++++++++++++++++++++++++ drivers/pci/probe.c | 3 +-- include/acpi/acpi_bus.h | 2 ++ include/linux/acpi.h | 5 +++++ 5 files changed, 50 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 5ea5dc2..f8d6564 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -227,8 +227,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) attr = acpi_get_dma_attr(acpi_dev); if (attr != DEV_DMA_NOT_SUPPORTED) - arch_setup_dma_ops(dev, 0, 0, NULL, - attr == DEV_DMA_COHERENT); + acpi_dma_configure(dev, attr); acpi_physnode_link_name(physical_node_name, node_id); retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, @@ -251,6 +250,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) return 0; err: + acpi_dma_deconfigure(dev); ACPI_COMPANION_SET(dev, NULL); put_device(dev); put_device(&acpi_dev->dev); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 035ac64..694e0b6 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1370,6 +1370,46 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) return DEV_DMA_NON_COHERENT; } +/** + * acpi_dma_configure - Set-up DMA configuration for the device. + * @dev: The pointer to the device + * @attr: device dma attributes + */ +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) +{ + /* + * Set default coherent_dma_mask to 32 bit. Drivers are expected to + * setup the correct supported mask. + */ + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); + + /* + * Set it to coherent_dma_mask by default if the architecture + * code has not set it. + */ + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + + /* + * Assume dma valid range starts at 0 and covers the whole + * coherent_dma_mask. + */ + arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, NULL, + attr == DEV_DMA_COHERENT); +} +EXPORT_SYMBOL_GPL(acpi_dma_configure); + +/** + * acpi_dma_deconfigure - Tear-down DMA configuration for the device. + * @dev: The pointer to the device + */ +void acpi_dma_deconfigure(struct device *dev) +{ + arch_teardown_dma_ops(dev); +} +EXPORT_SYMBOL_GPL(acpi_dma_deconfigure); + static void acpi_init_coherency(struct acpi_device *adev) { unsigned long long cca = 0; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index ab00267..c29e07a 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1738,8 +1738,7 @@ static void pci_dma_configure(struct pci_dev *dev) if (attr == DEV_DMA_NOT_SUPPORTED) dev_warn(&dev->dev, "DMA not supported.\n"); else - arch_setup_dma_ops(&dev->dev, 0, 0, NULL, - attr == DEV_DMA_COHERENT); + acpi_dma_configure(&dev->dev, attr); } pci_put_host_bridge_device(bridge); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index c1a524d..4242c31 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -573,6 +573,8 @@ struct acpi_pci_root { bool acpi_dma_supported(struct acpi_device *adev); enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev); +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr); +void acpi_dma_deconfigure(struct device *dev); struct acpi_device *acpi_find_child_device(struct acpi_device *parent, u64 address, bool check_children); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index a284273..3abbf2b 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -763,6 +763,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) return DEV_DMA_NOT_SUPPORTED; } +static inline void acpi_dma_configure(struct device *dev, + enum dev_dma_attr attr) { } + +static inline void acpi_dma_deconfigure(struct device *dev) { } + #define ACPI_PTR(_ptr) (NULL) static inline void acpi_device_set_enumerated(struct acpi_device *adev) -- 2.10.0