Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S938570AbcJTUAY (ORCPT ); Thu, 20 Oct 2016 16:00:24 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:43940 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S936553AbcJTUAN (ORCPT ); Thu, 20 Oct 2016 16:00:13 -0400 From: Franklin S Cooper Jr To: , , , , , , , , , , CC: Franklin S Cooper Jr Subject: [PATCH 2/4] Input: goodix - Allow tweaking of configuration file dynamically Date: Thu, 20 Oct 2016 14:59:15 -0500 Message-ID: <20161020195917.20051-3-fcooper@ti.com> X-Mailer: git-send-email 2.10.0 In-Reply-To: <20161020195917.20051-1-fcooper@ti.com> References: <20161020195917.20051-1-fcooper@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1744 Lines: 57 Some goodix touchscreen controllers don't have the correct configuration firmware for the display panel it is attached to. Therefore, settings such as touchscreen x and y size may need to be passed in via DT and have the panel reprogrammed for the updated touchscreen resolution. This patchset adds support for reading the current configuration firmware on the panel and allowing it to be modified and rewritten back to the device. Currently this function is unused but later patches will make use of it. Signed-off-by: Franklin S Cooper Jr --- drivers/input/touchscreen/goodix.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index a43c8ca..01e12f8 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -478,6 +478,34 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return 0; } +static void goodix_tweak_config(struct goodix_ts_data *ts) +{ + u8 config[GOODIX_CONFIG_MAX_LENGTH]; + int error; + int raw_cfg_len; + u8 check_sum = 0; + + raw_cfg_len = ts->cfg_len - 2; + + error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA, + config, ts->cfg_len); + if (error) { + dev_warn(&ts->client->dev, + "Error reading config (%d), avoid tweaking config\n", + error); + return; + } + + check_sum = goodix_calculate_checksum(ts->cfg_len, config); + + config[raw_cfg_len] = check_sum; + config[raw_cfg_len + 1] = 1; + + error = goodix_send_cfg(ts, ts->cfg_len, config); + if (error) + dev_warn(&ts->client->dev, + "Error writing config (%d)\n", error); +} /** * goodix_read_config - Read the embedded configuration of the panel * -- 2.10.0