Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S935985AbcJTT7p (ORCPT ); Thu, 20 Oct 2016 15:59:45 -0400 Received: from mail-pf0-f195.google.com ([209.85.192.195]:35729 "EHLO mail-pf0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932314AbcJTT7k (ORCPT ); Thu, 20 Oct 2016 15:59:40 -0400 From: Masanari Iida To: don.brace@microsemi.com, corbet@lwn.net, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Masanari Iida Subject: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt Date: Fri, 21 Oct 2016 04:59:32 +0900 Message-Id: <20161020195932.9287-1-standby24x7@gmail.com> X-Mailer: git-send-email 2.10.1.502.g6598894 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1067 Lines: 22 This patch fix a spelling typo in cciss.txt Signed-off-by: Masanari Iida --- Documentation/blockdev/cciss.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt index b79d0a13e7cd..3a5477cc456e 100644 --- a/Documentation/blockdev/cciss.txt +++ b/Documentation/blockdev/cciss.txt @@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart Array controllers is to act as a RAID controller for disk drives, so the vast majority of commands are allocated for disk devices. However, if you have more than a few tape drives attached to a smart array, the default number of commands may not be -enought (for example, if you have 8 tape drives, you could only rewind 6 +enough (for example, if you have 8 tape drives, you could only rewind 6 at one time with the default number of commands.) The cciss_tape_cmds module parameter allows more commands (up to 16 more) to be allocated for use by tape drives. For example: -- 2.10.1.502.g6598894