From: Don Brace <don.brace@microsemi.com>
To: Masanari Iida <standby24x7@gmail.com>,
        "corbet@lwn.net" <corbet@lwn.net>,
        "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt
Thread-Topic: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt
Thread-Index: AQHSKwyQ7Qb9acHpdk2PPry1n4fhYqCxzcaQ
Date: Thu, 20 Oct 2016 20:38:57 +0000
Message-ID: <4993A297653ECB4581FA5C3C31323D193B07DAEB@avsrvexchmbx1.microsemi.net>
References: <20161020195932.9287-1-standby24x7@gmail.com>
In-Reply-To: <20161020195932.9287-1-standby24x7@gmail.com>
Accept-Language: en-US
Content-Language: en-US
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
SpamDiagnosticOutput: 1:99
SpamDiagnosticMetadata: NSPM
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 20 Oct 2016 20:39:00.4051
 (UTC)
X-MS-Exchange-CrossTenant-Id: f267a5c8-86d8-4cc9-af71-1fd2c67c8fad
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=f267a5c8-86d8-4cc9-af71-1fd2c67c8fad;Ip=[208.19.100.21];Helo=[avsrvexchhts1.microsemi.net]
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BLUPR0201MB1905
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from quoted-printable to 8bit by mail.home.local id u9KLBYSi029299
Content-Length: 1496
Lines: 39

> -----Original Message-----
> From: Masanari Iida [mailto:standby24x7@gmail.com]
> Sent: Thursday, October 20, 2016 3:00 PM
> To: Don Brace; corbet@lwn.net; linux-doc@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Cc: Masanari Iida
> Subject: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt
> 
> EXTERNAL EMAIL
> 
> 
> This patch fix a spelling typo in cciss.txt
> 
> Signed-off-by: Masanari Iida <standby24x7@gmail.com>
> ---
>  Documentation/blockdev/cciss.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/blockdev/cciss.txt
> b/Documentation/blockdev/cciss.txt
> index b79d0a13e7cd..3a5477cc456e 100644
> --- a/Documentation/blockdev/cciss.txt
> +++ b/Documentation/blockdev/cciss.txt
> @@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart
> Array controllers is to
>  act as a RAID controller for disk drives, so the vast majority of commands
>  are allocated for disk devices.  However, if you have more than a few tape
>  drives attached to a smart array, the default number of commands may not
> be
> -enought (for example, if you have 8 tape drives, you could only rewind 6
> +enough (for example, if you have 8 tape drives, you could only rewind 6
>  at one time with the default number of commands.)  The cciss_tape_cmds
> module
>  parameter allows more commands (up to 16 more) to be allocated for use by
>  tape drives.  For example:
> --
> 2.10.1.502.g6598894

Acked-by: Don Brace <don.brace@microsemi.com>