Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754061AbcJUDdU (ORCPT ); Thu, 20 Oct 2016 23:33:20 -0400 Received: from mailgw02.mediatek.com ([210.61.82.184]:49407 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752810AbcJUDdP (ORCPT ); Thu, 20 Oct 2016 23:33:15 -0400 From: Erin Lo To: Matthias Brugger , Mike Turquette , Stephen Boyd , Rob Herring CC: Arnd Bergmann , Sascha Hauer , Daniel Kurtz , Philipp Zabel , , , , , , , , , Erin Lo Subject: [PATCH v14 4/4] arm: dts: mt2701: Use real clock for UARTs Date: Fri, 21 Oct 2016 11:32:22 +0800 Message-ID: <1477020742-13889-5-git-send-email-erin.lo@mediatek.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1477020742-13889-1-git-send-email-erin.lo@mediatek.com> References: <1477020742-13889-1-git-send-email-erin.lo@mediatek.com> MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1934 Lines: 68 We used to use a fixed rate clock for the UARTs. Now that we have clock support we can associate the correct clocks to the UARTs and drop the 26MHz fixed rate UART clock. Signed-off-by: Erin Lo --- arch/arm/boot/dts/mt2701.dtsi | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index c9a8dbf..7eab6f4 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -73,12 +73,6 @@ #clock-cells = <0>; }; - uart_clk: dummy26m { - compatible = "fixed-clock"; - clock-frequency = <26000000>; - #clock-cells = <0>; - }; - clk26m: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -186,7 +180,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -195,7 +190,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -204,7 +200,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -213,7 +210,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = ; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; status = "disabled"; }; }; -- 1.9.1