Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756743AbcJWX7J (ORCPT ); Sun, 23 Oct 2016 19:59:09 -0400 Received: from foss.arm.com ([217.140.101.70]:40556 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755384AbcJWX7G (ORCPT ); Sun, 23 Oct 2016 19:59:06 -0400 Subject: Re: [PATCH v5 2/4] arm64: dts: add Allwinner A64 SoC .dtsi To: Maxime Ripard , Mike Turquette , Stephen Boyd , Chen-Yu Tsai References: Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-sunxi@googlegroups.com From: =?UTF-8?Q?Andr=c3=a9_Przywara?= Organization: ARM Ltd. Message-ID: Date: Mon, 24 Oct 2016 00:57:04 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.4.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10743 Lines: 330 On 20/10/16 19:00, Maxime Ripard wrote: Hi Maxime, > From: Andre Przywara > > The Allwinner A64 SoC is a low-cost chip with 4 ARM Cortex-A53 cores > and the typical tablet / TV box peripherals. > The SoC is based on the (32-bit) Allwinner H3 chip, sharing most of > the peripherals and the memory map. > Although the cores are proper 64-bit ones, the whole SoC is actually > limited to 4GB (including all the supported DRAM), so we use 32-bit > address and size cells. This has the nice feature of us being able to > reuse the DT for 32-bit kernels as well. > This .dtsi lists the hardware that we support so far. > > Signed-off-by: Andre Przywara > Acked-by: Rob Herring > Acked-by: Chen-Yu Tsai > [Maxime: Convert to CCU binding, drop the MMC support for now] > Signed-off-by: Maxime Ripard > --- > Documentation/devicetree/bindings/arm/sunxi.txt | 1 +- > MAINTAINERS | 1 +- > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 263 +++++++++++++++++- > 3 files changed, 265 insertions(+), 0 deletions(-) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > > diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt > index 3975d0a0e4c2..4d6467cc2aa2 100644 > --- a/Documentation/devicetree/bindings/arm/sunxi.txt > +++ b/Documentation/devicetree/bindings/arm/sunxi.txt > @@ -14,4 +14,5 @@ using one of the following compatible strings: > allwinner,sun8i-a83t > allwinner,sun8i-h3 > allwinner,sun9i-a80 > + allwinner,sun50i-a64 > nextthing,gr8 > diff --git a/MAINTAINERS b/MAINTAINERS > index 1cd38a7e0064..86488e92655f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1019,6 +1019,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) > S: Maintained > N: sun[x456789]i > F: arch/arm/boot/dts/ntc-gr8* > +F: arch/arm64/boot/dts/allwinner/ > > ARM/Allwinner SoC Clock Support > M: Emilio López > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > new file mode 100644 > index 000000000000..be51024743b4 > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > @@ -0,0 +1,263 @@ > +/* > + * Copyright (C) 2016 ARM Ltd. > + * based on the Allwinner H3 dtsi: > + * Copyright (C) 2015 Jens Kuske > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include > +#include > +#include > +#include > + > +/ { > + interrupt-parent = <&gic>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + reg = <0>; > + enable-method = "psci"; > + }; > + > + cpu1: cpu@1 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + reg = <1>; > + enable-method = "psci"; > + }; > + > + cpu2: cpu@2 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + reg = <2>; > + enable-method = "psci"; > + }; > + > + cpu3: cpu@3 { > + compatible = "arm,cortex-a53", "arm,armv8"; > + device_type = "cpu"; > + reg = <3>; > + enable-method = "psci"; > + }; > + }; > + > + osc24M: osc24M_clk { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + clock-output-names = "osc24M"; > + }; > + > + osc32k: osc32k_clk { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <32768>; > + clock-output-names = "osc32k"; > + }; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, > + + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + ccu: clock@01c20000 { > + compatible = "allwinner,sun50i-a64-ccu"; > + reg = <0x01c20000 0x400>; > + clocks = <&osc24M>, <&osc32k>; > + clock-names = "hosc", "losc"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + pio: pinctrl@1c20800 { > + compatible = "allwinner,sun50i-a64-pinctrl"; > + reg = <0x01c20800 0x400>; > + interrupts = , > + , > + ; > + clocks = <&ccu CLK_BUS_PIO>; > + gpio-controller; > + #gpio-cells = <3>; > + interrupt-controller; > + #interrupt-cells = <3>; > + > + i2c1_pins: i2c1_pins { > + allwinner,pins = "PH2", "PH3"; > + allwinner,function = "i2c1"; So as Icenowy pointed out, we are missing the drive and pull properties here, at least as long as we don't have your patch (series) in place to cope with that. But if we rely on this series (which seems OK to me), shouldn't we then use the generic properties for pins and function here as well? Cheers, Andre. > + }; > + > + uart0_pins_a: uart0@0 { > + allwinner,pins = "PB8", "PB9"; > + allwinner,function = "uart0"; > + }; > + }; > + > + uart0: serial@1c28000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x01c28000 0x400>; > + interrupts = ; > + reg-shift = <2>; > + reg-io-width = <4>; > + clocks = <&ccu CLK_BUS_UART0>; > + resets = <&ccu RST_BUS_UART0>; > + status = "disabled"; > + }; > + > + uart1: serial@1c28400 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x01c28400 0x400>; > + interrupts = ; > + reg-shift = <2>; > + reg-io-width = <4>; > + clocks = <&ccu CLK_BUS_UART1>; > + resets = <&ccu RST_BUS_UART1>; > + status = "disabled"; > + }; > + > + uart2: serial@1c28800 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x01c28800 0x400>; > + interrupts = ; > + reg-shift = <2>; > + reg-io-width = <4>; > + clocks = <&ccu CLK_BUS_UART2>; > + resets = <&ccu RST_BUS_UART2>; > + status = "disabled"; > + }; > + > + uart3: serial@1c28c00 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x01c28c00 0x400>; > + interrupts = ; > + reg-shift = <2>; > + reg-io-width = <4>; > + clocks = <&ccu CLK_BUS_UART3>; > + resets = <&ccu RST_BUS_UART3>; > + status = "disabled"; > + }; > + > + uart4: serial@1c29000 { > + compatible = "snps,dw-apb-uart"; > + reg = <0x01c29000 0x400>; > + interrupts = ; > + reg-shift = <2>; > + reg-io-width = <4>; > + clocks = <&ccu CLK_BUS_UART4>; > + resets = <&ccu RST_BUS_UART4>; > + status = "disabled"; > + }; > + > + i2c0: i2c@1c2ac00 { > + compatible = "allwinner,sun6i-a31-i2c"; > + reg = <0x01c2ac00 0x400>; > + interrupts = ; > + clocks = <&ccu CLK_BUS_I2C0>; > + resets = <&ccu RST_BUS_I2C0>; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + i2c1: i2c@1c2b000 { > + compatible = "allwinner,sun6i-a31-i2c"; > + reg = <0x01c2b000 0x400>; > + interrupts = ; > + clocks = <&ccu CLK_BUS_I2C1>; > + resets = <&ccu RST_BUS_I2C1>; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + i2c2: i2c@1c2b400 { > + compatible = "allwinner,sun6i-a31-i2c"; > + reg = <0x01c2b400 0x400>; > + interrupts = ; > + clocks = <&ccu CLK_BUS_I2C2>; > + resets = <&ccu RST_BUS_I2C2>; > + status = "disabled"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + gic: interrupt-controller@1c81000 { > + compatible = "arm,gic-400"; > + reg = <0x01c81000 0x1000>, > + <0x01c82000 0x2000>, > + <0x01c84000 0x2000>, > + <0x01c86000 0x2000>; > + interrupts = ; > + interrupt-controller; > + #interrupt-cells = <3>; > + }; > + > + rtc: rtc@1f00000 { > + compatible = "allwinner,sun6i-a31-rtc"; > + reg = <0x01f00000 0x54>; > + interrupts = , > + ; > + }; > + }; > +}; >