Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965746AbcJXWTH (ORCPT ); Mon, 24 Oct 2016 18:19:07 -0400 Received: from mail-pf0-f178.google.com ([209.85.192.178]:34285 "EHLO mail-pf0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965620AbcJXWSM (ORCPT ); Mon, 24 Oct 2016 18:18:12 -0400 From: Ray Jui To: Bjorn Helgaas , Bjorn Helgaas Cc: linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-pci@vger.kernel.org, Alex Barba , Oza Oza , Ray Jui , Ray Jui Subject: [PATCH 10/12] PCI: iproc: Add inbound DMA mapping support Date: Mon, 24 Oct 2016 15:17:10 -0700 Message-Id: <1477347432-17656-11-git-send-email-ray.jui@broadcom.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1477347432-17656-1-git-send-email-ray.jui@broadcom.com> References: <1477347432-17656-1-git-send-email-ray.jui@broadcom.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9548 Lines: 333 This patch adds the support of inbound mapping to the iProc PCIe driver. The range of the inbound mapping is configured by the optional device tree property 'dma-ranges'. While inbound mapping is done automatically in the ASIC on most iProc based SoCs, newer ASIC (e.g., Stingray) requires inbound mapping to be configured explcitly in software Signed-off-by: Oza Oza Signed-off-by: Ray Jui Reviewed-by: Scott Branden --- drivers/pci/host/pcie-iproc.c | 235 ++++++++++++++++++++++++++++++++++++++++++ drivers/pci/host/pcie-iproc.h | 15 +++ 2 files changed, 250 insertions(+) diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c index b466ba6..c4e2211 100644 --- a/drivers/pci/host/pcie-iproc.c +++ b/drivers/pci/host/pcie-iproc.c @@ -81,6 +81,15 @@ #define OARR_VALID BIT(OARR_VALID_SHIFT) #define OARR_SIZE_CFG_SHIFT 1 +/* + * Maximum number of inbound mapping region sizes that can be supported by an + * IARR + */ +#define MAX_NUM_IB_REGION_SIZES 9 + +#define IMAP_VALID_SHIFT 0 +#define IMAP_VALID BIT(IMAP_VALID_SHIFT) + #define PCI_EXP_CAP 0xac #define IPROC_PCIE_REG_INVALID 0xffff @@ -109,6 +118,44 @@ static const struct iproc_pcie_ob_map paxb_ob_map[] = { }, }; +/** + * iProc PCIe inbound mapping type + */ +enum iproc_pcie_ib_map_type { + /* for DDR memory */ + IPROC_PCIE_IB_MAP_MEM = 0, + + /* for device I/O memory */ + IPROC_PCIE_IB_MAP_IO, + + /* invalid or unused */ + IPROC_PCIE_IB_MAP_INVALID +}; + +/** + * iProc PCIe inbound mapping controller specific parameters + * + * @type: inbound mapping region type + * @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or + * SZ_1G + * @region_sizes: list of supported inbound mapping region sizes in KB, MB, or + * GB, depedning on the size unit + * @nr_sizes: number of supported inbound mapping region sizes + * @nr_windows: number of supported inbound mapping windows for the region + * @imap_addr_offset: register offset between the upper and lower 32-bit + * IMAP address registers + * @imap_window_offset: register offset between each IMAP window + */ +struct iproc_pcie_ib_map { + enum iproc_pcie_ib_map_type type; + unsigned int size_unit; + resource_size_t region_sizes[MAX_NUM_IB_REGION_SIZES]; + unsigned int nr_sizes; + unsigned int nr_windows; + u16 imap_addr_offset; + u16 imap_window_offset; +}; + /* * iProc PCIe host registers */ @@ -162,6 +209,18 @@ enum iproc_pcie_reg { IPROC_PCIE_OARR3, IPROC_PCIE_OMAP3, + /* inbound address mapping */ + IPROC_PCIE_IARR0, + IPROC_PCIE_IMAP0, + IPROC_PCIE_IARR1, + IPROC_PCIE_IMAP1, + IPROC_PCIE_IARR2, + IPROC_PCIE_IMAP2, + IPROC_PCIE_IARR3, + IPROC_PCIE_IMAP3, + IPROC_PCIE_IARR4, + IPROC_PCIE_IMAP4, + /* link status */ IPROC_PCIE_LINK_STATUS, @@ -653,6 +712,178 @@ static int iproc_pcie_map_ranges(struct iproc_pcie *pcie, return 0; } +static inline bool iproc_pcie_ib_is_in_use(struct iproc_pcie *pcie, + int region_idx) +{ + const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx]; + u32 val; + + val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_IARR0, region_idx)); + + return !!(val & (BIT(ib_map->nr_sizes) - 1)); +} + +static inline bool iproc_pcie_ib_check_type(const struct iproc_pcie_ib_map *ib_map, + enum iproc_pcie_ib_map_type type) +{ + return !!(ib_map->type == type); +} + +static int iproc_pcie_ib_write(struct iproc_pcie *pcie, int region_idx, + int size_idx, int nr_windows, u64 axi_addr, + u64 pci_addr, resource_size_t size) +{ + struct device *dev = pcie->dev; + const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx]; + u16 iarr_offset, imap_offset; + u32 val; + int window_idx; + + iarr_offset = iproc_pcie_reg_offset(pcie, + MAP_REG(IPROC_PCIE_IARR0, region_idx)); + imap_offset = iproc_pcie_reg_offset(pcie, + MAP_REG(IPROC_PCIE_IMAP0, region_idx)); + if (iproc_pcie_reg_is_invalid(iarr_offset) || + iproc_pcie_reg_is_invalid(imap_offset)) + return -EINVAL; + + dev_info(dev, "ib region [%d]: offset 0x%x axi %pap pci %pap\n", + region_idx, iarr_offset, &axi_addr, &pci_addr); + + /* + * Program the IARR registers. The upper 32-bit IARR register is + * always right after the lower 32-bit IARR register + */ + writel(lower_32_bits(pci_addr) | BIT(size_idx), + pcie->base + iarr_offset); + writel(upper_32_bits(pci_addr), pcie->base + iarr_offset + 4); + + dev_info(dev, "iarr lo 0x%x iarr hi 0x%x\n", + readl(pcie->base + iarr_offset), + readl(pcie->base + iarr_offset + 4)); + + /* + * Now program the IMAP registers. Each IARR region may have one or + * more IMAP windows + */ + size /= nr_windows; + for (window_idx = 0; window_idx < nr_windows; window_idx++) { + val = readl(pcie->base + imap_offset); + val |= lower_32_bits(axi_addr) | IMAP_VALID; + writel(val, pcie->base + imap_offset); + writel(upper_32_bits(axi_addr), + pcie->base + imap_offset + ib_map->imap_addr_offset); + + dev_info(dev, "imap window [%d] lo 0x%x hi 0x%x\n", + window_idx, readl(pcie->base + imap_offset), + readl(pcie->base + imap_offset + + ib_map->imap_addr_offset)); + + imap_offset += ib_map->imap_window_offset; + axi_addr += size; + } + + return 0; +} + +static int iproc_pcie_setup_ib(struct iproc_pcie *pcie, + struct of_pci_range *range, + enum iproc_pcie_ib_map_type type) +{ + struct device *dev = pcie->dev; + struct iproc_pcie_ib *ib = &pcie->ib; + int ret; + unsigned int region_idx, size_idx; + u64 axi_addr = range->cpu_addr, pci_addr = range->pci_addr; + resource_size_t size = range->size; + + /* iterate through all IARR mapping regions */ + for (region_idx = 0; region_idx < ib->nr_regions; region_idx++) { + const struct iproc_pcie_ib_map *ib_map = + &pcie->ib_map[region_idx]; + + /* + * If current inbound region is already in use or not a + * compatible type, move on to the next + */ + if (iproc_pcie_ib_is_in_use(pcie, region_idx) || + !iproc_pcie_ib_check_type(ib_map, type)) + continue; + + /* iterate through all supported region sizes to find a match */ + for (size_idx = 0; size_idx < ib_map->nr_sizes; size_idx++) { + resource_size_t region_size = + ib_map->region_sizes[size_idx] * ib_map->size_unit; + + if (size != region_size) + continue; + + if (!IS_ALIGNED(axi_addr, region_size) || + !IS_ALIGNED(pci_addr, region_size)) { + dev_err(dev, + "axi %pap or pci %pap not aligned\n", + &axi_addr, &pci_addr); + return -EINVAL; + } + + /* match found! program IARR and all IMAP windows */ + ret = iproc_pcie_ib_write(pcie, region_idx, size_idx, + ib_map->nr_windows, axi_addr, + pci_addr, size); + if (ret) + goto err_ib; + else + return 0; + + } + } +err_ib: + dev_err(dev, "unable to configure inbound mapping\n"); + dev_err(dev, "axi %pap, pci %pap, res size %pap\n", + &axi_addr, &pci_addr, &size); + + return ret; +} + +static int pci_dma_range_parser_init(struct of_pci_range_parser *parser, + struct device_node *node) +{ + const int na = 3, ns = 2; + int rlen; + + parser->node = node; + parser->pna = of_n_addr_cells(node); + parser->np = parser->pna + na + ns; + + parser->range = of_get_property(node, "dma-ranges", &rlen); + if (!parser->range) + return -ENOENT; + + parser->end = parser->range + rlen / sizeof(__be32); + return 0; +} + +static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie) +{ + struct of_pci_range range; + struct of_pci_range_parser parser; + int ret; + + /* get the dma-ranges from DT */ + ret = pci_dma_range_parser_init(&parser, pcie->dev->of_node); + if (ret) + return ret; + + for_each_of_pci_range(&parser, &range) { + /* each range entry corresponds to an inbound mapping region */ + ret = iproc_pcie_setup_ib(pcie, &range, IPROC_PCIE_IB_MAP_MEM); + if (ret) + return ret; + } + + return 0; +} + static int iproce_pcie_get_msi(struct iproc_pcie *pcie, struct device_node *msi_node, u64 *msi_addr) @@ -880,6 +1111,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) } } + ret = iproc_pcie_map_dma_ranges(pcie); + if (ret && ret != -ENOENT) + goto err_power_off_phy; + #ifdef CONFIG_ARM pcie->sysdata.private_data = pcie; sysdata = &pcie->sysdata; diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h index 861b526..3f2709a 100644 --- a/drivers/pci/host/pcie-iproc.h +++ b/drivers/pci/host/pcie-iproc.h @@ -41,7 +41,16 @@ struct iproc_pcie_ob { unsigned int nr_windows; }; +/** + * iProc PCIe inbound mapping + * @nr_regions: total number of supported inbound mapping regions + */ +struct iproc_pcie_ib { + unsigned int nr_regions; +}; + struct iproc_pcie_ob_map; +struct iproc_pcie_ib_map; struct iproc_msi; /** @@ -64,6 +73,9 @@ struct iproc_msi; * @ob: outbound mapping related parameters * @ob_map: outbound mapping related parameters specific to the controller * + * @ib: inbound mapping related parameters + * @ib_map: outbound mapping region related parameters + * * @need_msi_steer: indicates additional configuration of the iProc PCIe * controller is required to steer MSI writes to external interrupt controller * @msi: MSI data @@ -87,6 +99,9 @@ struct iproc_pcie { struct iproc_pcie_ob ob; const struct iproc_pcie_ob_map *ob_map; + struct iproc_pcie_ib ib; + const struct iproc_pcie_ib_map *ib_map; + bool need_msi_steer; struct iproc_msi *msi; }; -- 2.1.4