Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966123AbcJ0OWb (ORCPT ); Thu, 27 Oct 2016 10:22:31 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:43547 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S941577AbcJ0OWK (ORCPT ); Thu, 27 Oct 2016 10:22:10 -0400 From: Peter Senna Tschudin To: airlied@linux.ie, architt@codeaurora.org, akpm@linux-foundation.org, daniel.vetter@ffwll.ch, davem@davemloft.net, devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, enric.balletbo@collabora.com, eballetbo@gmail.com, galak@codeaurora.org, gregkh@linuxfoundation.org, heiko@sntech.de, ijc+devicetree@hellion.org.uk, javier@dowhile0.org, jslaby@suse.cz, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, linux@armlinux.org.uk, linux-kernel@vger.kernel.org, linux@roeck-us.net, mark.rutland@arm.com, martin.donnelly@ge.com, martyn.welch@collabora.co.uk, mchehab@osg.samsung.com, pawel.moll@arm.com, peter.senna@collabora.com, peter.senna@gmail.com, p.zabel@pengutronix.de, thierry.reding@gmail.com, rmk+kernel@armlinux.org.uk, robh+dt@kernel.org, shawnguo@kernel.org, tiwai@suse.com, treding@nvidia.com, ykk@rock-chips.com Subject: [PATCH V6 0/4] Add driver for GE B850v3 LVDS/DP++ Bridge Date: Thu, 27 Oct 2016 15:01:52 +0200 Message-Id: X-Mailer: git-send-email 2.5.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2494 Lines: 61 The series adds a driver that creates a drm_bridge and a drm_connector for the LVDS to DP++ display bridge of the GE B850v3. There are two physical bridges on the video signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). The hardware and firmware made it complicated for this binding to comprise two device tree nodes, as the design goal is to configure both bridges based on the LVDS signal, which leave the driver powerless to control the video processing pipeline. The two bridges behaves as a single bridge, and the driver is only needed for telling the host about EDID / HPD, and for giving the host powers to ack interrupts. The video signal pipeline is as follows: Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output This series depends on commit dc80d7038883 ("drm/imx-ldb: Add support to drm-bridge") which is already on linux-next. The patches from the series: [1/4] Devicetree documentation for the GE B850v3 LVDS/DP++ Bridge [2/4] Update the MAINTAINERS file [3/4] Add the driver, make changes to Kconfig and Makefile [4/4] Make the changes to the B850v3 dts file to enable the GE B850v3 LVDS/DP++ Bridge. Tested on next20161027. Changes from V5: - Change to MAINTAINERS in a separate patch - Reworked interrupt handler initialization - Removed useless calls to: drm_connector_register(), drm_helper_hpd_irq_event(), and drm_bridge_enable() Changes from V4: - Renamed the i2c_driver.name from "ge,b850v3-lvds-dp" to "b850v3-lvds-dp" to remove the comma from the driver name Changes from V3: - Removed the patch that was configuring the mapping between IPUs and external displays on the dts file Peter Senna Tschudin (4): Documentation/devicetree/bindings: b850v3_lvds_dp MAINTAINERS: Add entry for GE B850v3 LVDS/DP++ Bridge drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge .../devicetree/bindings/ge/b850v3-lvds-dp.txt | 37 ++ MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-b850v3.dts | 30 ++ drivers/gpu/drm/bridge/Kconfig | 11 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c | 395 +++++++++++++++++++++ 6 files changed, 482 insertions(+) create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt create mode 100644 drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c -- 2.5.5