Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S942783AbcJ1G7q (ORCPT ); Fri, 28 Oct 2016 02:59:46 -0400 Received: from mail-pf0-f196.google.com ([209.85.192.196]:36143 "EHLO mail-pf0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S942284AbcJ1G7m (ORCPT ); Fri, 28 Oct 2016 02:59:42 -0400 From: Milo Kim To: Maxime Ripard , Chen-Yu Tsai Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, James Pettigrew , Milo Kim Subject: [PATCH v2 3/3] ARM: dts: sun8i: Add dts file for NanoPi M1 SBC Date: Fri, 28 Oct 2016 15:59:03 +0900 Message-Id: <20161028065903.23298-4-woogyom.kim@gmail.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20161028065903.23298-1-woogyom.kim@gmail.com> References: <20161028065903.23298-1-woogyom.kim@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3028 Lines: 84 NanoPi M1 is the Allwinner H3 based board. This patch enables UART for debug console, LEDs, GPIO key switch, 3 USB host ports, a micro SD slot and related power and pin controls by using NanoPi common dtsi file. Cc: James Pettigrew Signed-off-by: Milo Kim --- arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 64 ++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts new file mode 100644 index 0000000..ec63d10 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2016 Milo Kim + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyArm NanoPi M1"; + compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; -- 2.9.3