Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754843AbcJ3KUy (ORCPT ); Sun, 30 Oct 2016 06:20:54 -0400 Received: from mail-pf0-f193.google.com ([209.85.192.193]:34635 "EHLO mail-pf0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754724AbcJ3KUx (ORCPT ); Sun, 30 Oct 2016 06:20:53 -0400 Date: Sun, 30 Oct 2016 20:20:46 +1000 From: John Heenan To: Jes Sorensen , Kalle Valo , linux-wireless@vger.kernel.org, netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Subject: [PATCH 1/2] rtl8xxxu: Fix for authentication failure Message-ID: <20161030102046.GA5784@cube> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.7.1 (2016-10-04) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1536 Lines: 47 This fix enables the same sequence of init behaviour as the alternative working driver for the wireless rtl8723bu IC at https://github.com/lwfinger/rtl8723bu For exampe rtl8xxxu_init_device is now called each time userspace wpa_supplicant is executed instead of just once when modprobe is executed. Along with 'Fix for bogus data used to determine macpower', wpa_supplicant now reliably and successfully authenticates. For rtl8xxxu-devel branch of git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git Signed-off-by: John Heenan --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 04141e5..f25b4df 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -5779,6 +5779,11 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw) ret = 0; + ret = rtl8xxxu_init_device(hw); + if (ret) + goto error_out; + + init_usb_anchor(&priv->rx_anchor); init_usb_anchor(&priv->tx_anchor); init_usb_anchor(&priv->int_anchor); @@ -6080,10 +6085,6 @@ static int rtl8xxxu_probe(struct usb_interface *interface, goto exit; } - ret = rtl8xxxu_init_device(hw); - if (ret) - goto exit; - hw->wiphy->max_scan_ssids = 1; hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); -- 2.10.1