Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1762072AbcJaILX (ORCPT ); Mon, 31 Oct 2016 04:11:23 -0400 Received: from smtp-1b.atlantis.sk ([80.94.52.26]:40489 "EHLO smtp-1b.atlantis.sk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758550AbcJaILU (ORCPT ); Mon, 31 Oct 2016 04:11:20 -0400 From: Ondrej Zary To: Finn Thain Subject: Re: [PATCH 1/3] NCR5380: Use probe_irq_*() for IRQ probing Date: Mon, 31 Oct 2016 09:11:14 +0100 User-Agent: KMail/1.9.10 (enterprise35 0.20100827.1168748) Cc: Christoph Hellwig , linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org References: <1477867203-7480-1-git-send-email-linux@rainbow-software.org> In-Reply-To: X-KMail-QuotePrefix: > MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <201610310911.14684.linux@rainbow-software.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6450 Lines: 194 On Monday 31 October 2016, Finn Thain wrote: > On Sun, 30 Oct 2016, Ondrej Zary wrote: > > Use standard probe_irq_on() and probe_irq_off() functions instead of own > > implementation. > > Thanks for doing this. > > > This prevents warning messages like this in the kernel log: > > genirq: Flags mismatch irq 1. 00000000 (NCR-probe) vs. 00000080 (i8042) > > > > Move the IRQ trigger code to a separate function so it can be used for > > other purposes (testing if the IRQ works). > > > > Also add missing IRQ reset after probe. > > > > Signed-off-by: Ondrej Zary > > --- > > drivers/scsi/NCR5380.c | 72 > > +++++++++++++++++----------------------------- drivers/scsi/NCR5380.h | > > 3 +- > > drivers/scsi/g_NCR5380.c | 2 +- > > 3 files changed, 29 insertions(+), 48 deletions(-) > > > > diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c > > index d849ffa..01c0027 100644 > > --- a/drivers/scsi/NCR5380.c > > +++ b/drivers/scsi/NCR5380.c > > @@ -351,50 +351,13 @@ static void NCR5380_print_phase(struct Scsi_Host > > *instance) } > > #endif > > > > - > > -static int probe_irq; > > - > > -/** > > - * probe_intr - helper for IRQ autoprobe > > - * @irq: interrupt number > > - * @dev_id: unused > > - * @regs: unused > > - * > > - * Set a flag to indicate the IRQ in question was received. This is > > - * used by the IRQ probe code. > > - */ > > - > > -static irqreturn_t probe_intr(int irq, void *dev_id) > > -{ > > - probe_irq = irq; > > - return IRQ_HANDLED; > > -} > > - > > -/** > > - * NCR5380_probe_irq - find the IRQ of an NCR5380 > > - * @instance: NCR5380 controller > > - * @possible: bitmask of ISA IRQ lines > > - * > > - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ > > - * and then looking to see what interrupt actually turned up. > > - */ > > - > > -static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance, > > - int possible) > > +static void NCR5380_trigger_irq(struct Scsi_Host *instance) > > { > > struct NCR5380_hostdata *hostdata = shost_priv(instance); > > - unsigned long timeout; > > - int trying_irqs, i, mask; > > - > > - for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1) > > - if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", > > NULL) == 0)) - trying_irqs |= mask; > > - > > - timeout = jiffies + msecs_to_jiffies(250); > > - probe_irq = NO_IRQ; > > + unsigned long timeout = jiffies + msecs_to_jiffies(2500); > > > > /* > > - * A interrupt is triggered whenever BSY = false, SEL = true > > + * An interrupt is triggered whenever BSY = false, SEL = true > > * and a bit set in the SELECT_ENABLE_REG is asserted on the > > * SCSI bus. > > * > > @@ -402,23 +365,40 @@ static int __maybe_unused NCR5380_probe_irq(struct > > Scsi_Host *instance, * (I/O, C/D, and MSG) match those in the TCR, so we > > must reset that * to zero. > > */ > > - > > NCR5380_write(TARGET_COMMAND_REG, 0); > > NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); > > NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask); > > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | > > ICR_ASSERT_SEL); > > > > - while (probe_irq == NO_IRQ && time_before(jiffies, timeout)) > > + while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) && > > + time_before(jiffies, timeout)) > > schedule_timeout_uninterruptible(1); > > You don't need a 2.5 second timeout here. To raise the interrupt the chip > should not need more than a bus settle delay (400ns). Calling msleep(1) > should be plenty. Yes, 2.5s is a mistake (leftover from testing), sorry. > Better still, please drop the loop, the delay and the BASR_IRQ test here, > and if need be, put the delay in the caller. This routine discards the > result of that sequence anyway. Will if work if the following lines are executed before the delay? > > > NCR5380_write(SELECT_ENABLE_REG, 0); > > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); > > +} > > > > - for (i = 1, mask = 2; i < 16; ++i, mask <<= 1) > > - if (trying_irqs & mask) > > - free_irq(i, NULL); > > +/** > > + * NCR5380_probe_irq - find the IRQ of an NCR5380 > > + * @instance: NCR5380 controller > > + * > > + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ > > + * and then looking to see what interrupt actually turned up. > > + */ > > + > > +static int NCR5380_probe_irq(struct Scsi_Host *instance) > > +{ > > + struct NCR5380_hostdata *hostdata = shost_priv(instance); > > + int irqs, irq; > > + > > Please rename irqs to irq_mask. > > Other drivers like tty/cyclades.c begin with, > > /* forget possible initially masked and pending IRQ */ > irq = probe_irq_off(probe_irq_on()); > > Perhaps we need that here too? Only cyclades and 8250_port do that, other drivers don't. Don't know what exact problem should that solve. > > > + irqs = probe_irq_on(); > > You should clear any pending interrupt on the chip before you try to > trigger another one. > > > + NCR5380_trigger_irq(instance); > > Please do the msleep(1) here. > > > + irq = probe_irq_off(irqs); > > + NCR5380_read(RESET_PARITY_INTERRUPT_REG); > > + if (irq < 0) > > + irq = 0; > > Please use NO_IRQ instead of 0. > > > - return probe_irq; > > + return irq; > > } > > > > /** > > diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h > > index 3c6ce54..b2fca52 100644 > > --- a/drivers/scsi/NCR5380.h > > +++ b/drivers/scsi/NCR5380.h > > @@ -290,7 +290,8 @@ static inline struct scsi_cmnd > > *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr) #define > > NCR5380_dprint_phase(flg, arg) do {} while (0) > > #endif > > > > -static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible); > > +static void NCR5380_trigger_irq(struct Scsi_Host *instance); > > +static int NCR5380_probe_irq(struct Scsi_Host *instance); > > static int NCR5380_init(struct Scsi_Host *instance, int flags); > > static int NCR5380_maybe_reset_bus(struct Scsi_Host *); > > static void NCR5380_exit(struct Scsi_Host *instance); > > Please move NCR5380_probe_irq and NCR5380_trigger_irq implementations and > prototypes out of the core driver and into g_NCR5380.c. The reason is, ISA > cards are probably the only 5380 cards ever likely to need manual IRQ > configuration. It would better to have g_NCR5380 support more ISA cards > than to add more ISA drivers, therefore this code isn't likely to be > needed in the core driver. > > Thanks. -- Ondrej Zary