Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S943450AbcJaOUJ (ORCPT ); Mon, 31 Oct 2016 10:20:09 -0400 Received: from mail-wm0-f47.google.com ([74.125.82.47]:35412 "EHLO mail-wm0-f47.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S943370AbcJaOUF (ORCPT ); Mon, 31 Oct 2016 10:20:05 -0400 From: Bartosz Golaszewski To: Jyri Sarha , Tomi Valkeinen , David Airlie , Kevin Hilman , Michael Turquette , Sekhar Nori Cc: LKML , linux-drm , Peter Ujfalusi , arm-soc , Bartosz Golaszewski Subject: [PATCH v5 1/2] drm: tilcdc: implement palette loading for rev1 Date: Mon, 31 Oct 2016 15:19:26 +0100 Message-Id: <1477923567-1610-2-git-send-email-bgolaszewski@baylibre.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1477923567-1610-1-git-send-email-bgolaszewski@baylibre.com> References: <1477923567-1610-1-git-send-email-bgolaszewski@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5327 Lines: 165 Revision 1 of the IP doesn't work if we don't load the palette (even if it's not used, which is the case for the RGB565 format). Add a function called from tilcdc_crtc_enable() which performs all required actions if we're dealing with a rev1 chip. Signed-off-by: Bartosz Golaszewski --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 88 +++++++++++++++++++++++++++++++++++- 1 file changed, 87 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index db2f538..937697d 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -21,11 +21,15 @@ #include #include #include +#include +#include #include "tilcdc_drv.h" #include "tilcdc_regs.h" -#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000 +#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000 +#define TILCDC_REV1_PALETTE_SIZE 32 +#define TILCDC_REV1_PALETTE_FIRST_ENTRY 0x4000 struct tilcdc_crtc { struct drm_crtc base; @@ -53,6 +57,10 @@ struct tilcdc_crtc { int sync_lost_count; bool frame_intact; + + dma_addr_t palette_dma_handle; + void *palette_base; + struct completion palette_loaded; }; #define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base) @@ -98,6 +106,55 @@ static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb) tilcdc_crtc->curr_fb = fb; } +/* + * The driver currently only supports the RGB565 format for revision 1. For + * 16 bits-per-pixel the palette block is bypassed, but the first 32 bytes of + * the framebuffer are still considered palette. The first 16-bit entry must + * be 0x4000 while all other entries must be zeroed. + */ +static void tilcdc_crtc_load_palette(struct drm_crtc *crtc) +{ + u32 dma_fb_base, dma_fb_ceiling, raster_ctl; + struct tilcdc_crtc *tilcdc_crtc; + struct drm_device *dev; + u16 *first_entry; + + dev = crtc->dev; + tilcdc_crtc = to_tilcdc_crtc(crtc); + first_entry = tilcdc_crtc->palette_base; + + *first_entry = TILCDC_REV1_PALETTE_FIRST_ENTRY; + + dma_fb_base = tilcdc_read(dev, LCDC_DMA_FB_BASE_ADDR_0_REG); + dma_fb_ceiling = tilcdc_read(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG); + raster_ctl = tilcdc_read(dev, LCDC_RASTER_CTRL_REG); + + /* Tell the LCDC where the palette is located. */ + tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, + tilcdc_crtc->palette_dma_handle); + tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG, + (u32)tilcdc_crtc->palette_dma_handle + + TILCDC_REV1_PALETTE_SIZE - 1); + + /* Load it. */ + tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, + LCDC_PALETTE_LOAD_MODE(DATA_ONLY)); + tilcdc_set(dev, LCDC_RASTER_CTRL_REG, + LCDC_PALETTE_LOAD_MODE(PALETTE_ONLY)); + + /* Enable the LCDC and wait for palette to be loaded. */ + tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA); + tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); + + wait_for_completion(&tilcdc_crtc->palette_loaded); + + /* Restore the registers. */ + tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); + tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_fb_base); + tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG, dma_fb_ceiling); + tilcdc_write(dev, LCDC_RASTER_CTRL_REG, raster_ctl); +} + static void tilcdc_crtc_enable_irqs(struct drm_device *dev) { struct tilcdc_drm_private *priv = dev->dev_private; @@ -152,6 +209,7 @@ static void tilcdc_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); + struct tilcdc_drm_private *priv = dev->dev_private; WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); @@ -162,6 +220,9 @@ static void tilcdc_crtc_enable(struct drm_crtc *crtc) reset(crtc); + if (priv->rev == 1 && !completion_done(&tilcdc_crtc->palette_loaded)) + tilcdc_crtc_load_palette(crtc); + tilcdc_crtc_enable_irqs(dev); tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); @@ -200,6 +261,13 @@ void tilcdc_crtc_disable(struct drm_crtc *crtc) __func__); } + /* + * LCDC will not retain the palette when reset. Make sure it gets + * reloaded on tilcdc_crtc_enable(). + */ + if (priv->rev == 1) + reinit_completion(&tilcdc_crtc->palette_loaded); + drm_crtc_vblank_off(crtc); tilcdc_crtc_disable_irqs(dev); @@ -802,6 +870,14 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow", __func__, stat); + if (priv->rev == 1) { + if (stat & LCDC_PL_LOAD_DONE) { + complete(&tilcdc_crtc->palette_loaded); + tilcdc_clear(dev, + LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA); + } + } + /* For revision 2 only */ if (priv->rev == 2) { if (stat & LCDC_FRAME_DONE) { @@ -843,6 +919,16 @@ struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) return NULL; } + if (priv->rev == 1) { + init_completion(&tilcdc_crtc->palette_loaded); + tilcdc_crtc->palette_base = dmam_alloc_coherent(dev->dev, + TILCDC_REV1_PALETTE_SIZE, + &tilcdc_crtc->palette_dma_handle, + GFP_KERNEL | __GFP_ZERO); + if (!tilcdc_crtc->palette_base) + return ERR_PTR(-ENOMEM); + } + crtc = &tilcdc_crtc->base; ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary); -- 2.9.3