Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753276AbcKBHno (ORCPT ); Wed, 2 Nov 2016 03:43:44 -0400 Received: from regular1.263xmail.com ([211.150.99.140]:56034 "EHLO regular1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750935AbcKBHnj (ORCPT ); Wed, 2 Nov 2016 03:43:39 -0400 X-263anti-spam: KSV:0; X-MAIL-GRAY: 0 X-MAIL-DELIVERY: 1 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-ADDR-CHECKED4: 1 X-RL-SENDER: wulf@rock-chips.com X-FST-TO: kishon@ti.com X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: wulf@rock-chips.com X-UNIQUE-TAG: <717ea52e5b647f508fc8380251e627a8> X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 From: William Wu To: kishon@ti.com, heiko@sntech.de Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, robh+dt@kernel.org, frank.wang@rock-chips.com, huangtao@rock-chips.com, dianders@google.com, briannorris@google.com, groeck@google.com, wulf@rock-chips.com Subject: [PATCH 1/2] phy: rockchip-inno-usb2: support otg-port for rk3399 Date: Wed, 2 Nov 2016 15:42:17 +0800 Message-Id: <1478072538-32081-2-git-send-email-wulf@rock-chips.com> X-Mailer: git-send-email 2.0.0 In-Reply-To: <1478072538-32081-1-git-send-email-wulf@rock-chips.com> References: <1478072538-32081-1-git-send-email-wulf@rock-chips.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 26363 Lines: 838 The rk3399 SoC USB2 PHY is comprised of one Host port and one OTG port. And OTG port is for USB2.0 part of USB3.0 OTG controller, as a part to construct a fully feature Type-C subsystem. With this patch, we can support OTG port with the following functions: - Support BC1.2 charger detect, and use extcon notifier to send USB charger types to power driver. - Support PHY suspend for power management. - Support OTG Host only mode. - Hold a wakelock when work as SDP(e.g. connect to PC). Also, correct 480MHz output clock stable time. We found that the system crashed due to 480MHz output clock of USB2 PHY was unstable after clock had been enabled by gpu module. Theoretically, 1 millisecond is a critical value for 480 output clock stable time, so we try changing the delay time to 1.2 millisecond to avoid this issue. Signed-off-by: William Wu --- drivers/phy/phy-rockchip-inno-usb2.c | 609 +++++++++++++++++++++++++++++++++-- 1 file changed, 578 insertions(+), 31 deletions(-) diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c index ac20310..352cf87 100644 --- a/drivers/phy/phy-rockchip-inno-usb2.c +++ b/drivers/phy/phy-rockchip-inno-usb2.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -30,11 +31,16 @@ #include #include #include +#include #include #include +#include +#include +#include #define BIT_WRITEABLE_SHIFT 16 -#define SCHEDULE_DELAY (60 * HZ) +#define SCHEDULE_DELAY (60 * HZ) +#define OTG_SCHEDULE_DELAY (2 * HZ) enum rockchip_usb2phy_port_id { USB2PHY_PORT_OTG, @@ -49,6 +55,37 @@ enum rockchip_usb2phy_host_state { PHY_STATE_FS_LS_ONLINE = 4, }; +/** + * Different states involved in USB charger detection. + * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection + * process is not yet started. + * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. + * USB_CHG_STATE_DCD_DONE Data pin contact is detected. + * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects + * between SDP and DCP/CDP). + * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects + * between DCP and CDP). + * USB_CHG_STATE_DETECTED USB charger type is determined. + */ +enum usb_chg_state { + USB_CHG_STATE_UNDEFINED = 0, + USB_CHG_STATE_WAIT_FOR_DCD, + USB_CHG_STATE_DCD_DONE, + USB_CHG_STATE_PRIMARY_DONE, + USB_CHG_STATE_SECONDARY_DONE, + USB_CHG_STATE_DETECTED, +}; + +static const unsigned int rockchip_usb2phy_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_SLOW, + EXTCON_NONE, +}; + struct usb2phy_reg { unsigned int offset; unsigned int bitend; @@ -58,19 +95,55 @@ struct usb2phy_reg { }; /** + * struct rockchip_chg_det_reg: usb charger detect registers + * @cp_det: charging port detected successfully. + * @dcp_det: dedicated charging port detected successfully. + * @dp_det: assert data pin connect successfully. + * @idm_sink_en: open dm sink curren. + * @idp_sink_en: open dp sink current. + * @idp_src_en: open dm source current. + * @rdm_pdwn_en: open dm pull down resistor. + * @vdm_src_en: open dm voltage source. + * @vdp_src_en: open dp voltage source. + * @opmode: utmi operational mode. + */ +struct rockchip_chg_det_reg { + struct usb2phy_reg cp_det; + struct usb2phy_reg dcp_det; + struct usb2phy_reg dp_det; + struct usb2phy_reg idm_sink_en; + struct usb2phy_reg idp_sink_en; + struct usb2phy_reg idp_src_en; + struct usb2phy_reg rdm_pdwn_en; + struct usb2phy_reg vdm_src_en; + struct usb2phy_reg vdp_src_en; + struct usb2phy_reg opmode; +}; + +/** * struct rockchip_usb2phy_port_cfg: usb-phy port configuration. * @phy_sus: phy suspend register. + * @bvalid_det_en: vbus valid rise detection enable register. + * @bvalid_det_st: vbus valid rise detection status register. + * @bvalid_det_clr: vbus valid rise detection clear register. * @ls_det_en: linestate detection enable register. * @ls_det_st: linestate detection state register. * @ls_det_clr: linestate detection clear register. + * @utmi_avalid: utmi vbus avalid status register. + * @utmi_bvalid: utmi vbus bvalid status register. * @utmi_ls: utmi linestate state register. * @utmi_hstdet: utmi host disconnect register. */ struct rockchip_usb2phy_port_cfg { struct usb2phy_reg phy_sus; + struct usb2phy_reg bvalid_det_en; + struct usb2phy_reg bvalid_det_st; + struct usb2phy_reg bvalid_det_clr; struct usb2phy_reg ls_det_en; struct usb2phy_reg ls_det_st; struct usb2phy_reg ls_det_clr; + struct usb2phy_reg utmi_avalid; + struct usb2phy_reg utmi_bvalid; struct usb2phy_reg utmi_ls; struct usb2phy_reg utmi_hstdet; }; @@ -80,31 +153,54 @@ struct rockchip_usb2phy_port_cfg { * @reg: the address offset of grf for usb-phy config. * @num_ports: specify how many ports that the phy has. * @clkout_ctl: keep on/turn off output clk of phy. + * @chg_det: charger detection registers. */ struct rockchip_usb2phy_cfg { unsigned int reg; unsigned int num_ports; struct usb2phy_reg clkout_ctl; const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; + const struct rockchip_chg_det_reg chg_det; }; /** * struct rockchip_usb2phy_port: usb-phy port data. * @port_id: flag for otg port or host port. * @suspended: phy suspended flag. + * @utmi_avalid: utmi avalid status usage flag. + * true - use avalid to get vbus status + * flase - use bvalid to get vbus status + * @vbus_attached: otg device vbus status. + * @bvalid_irq: IRQ number assigned for vbus valid rise detection. * @ls_irq: IRQ number assigned for linestate detection. * @mutex: for register updating in sm_work. - * @sm_work: OTG state machine work. + * @chg_work: charge detect work. + * @otg_sm_work: OTG state machine work. + * @sm_work: HOST state machine work. * @phy_cfg: port register configuration, assigned by driver data. + * @event_nb: hold event notification callback. + * @wakelock: wake lock struct to prevent system suspend + * when USB is active. + * @state: define OTG enumeration states before device reset. + * @mode: the dr_mode of the controller. */ struct rockchip_usb2phy_port { struct phy *phy; unsigned int port_id; bool suspended; + bool utmi_avalid; + bool vbus_attached; + int bvalid_irq; int ls_irq; struct mutex mutex; + struct delayed_work chg_work; + struct delayed_work otg_sm_work; struct delayed_work sm_work; const struct rockchip_usb2phy_port_cfg *port_cfg; + struct notifier_block event_nb; + struct wake_lock wakelock; + enum usb_otg_state state; + enum usb_dr_mode mode; }; /** @@ -113,6 +209,11 @@ struct rockchip_usb2phy_port { * @clk: clock struct of phy input clk. * @clk480m: clock struct of phy output clk. * @clk_hw: clock struct of phy output clk management. + * @chg_state: states involved in USB charger detection. + * @chg_type: USB charger types. + * @dcd_retries: The retry count used to track Data contact + * detection process. + * @edev: extcon device for notification registration * @phy_cfg: phy register configuration, assigned by driver data. * @ports: phy port instance. */ @@ -122,6 +223,10 @@ struct rockchip_usb2phy { struct clk *clk; struct clk *clk480m; struct clk_hw clk480m_hw; + enum usb_chg_state chg_state; + enum power_supply_type chg_type; + u8 dcd_retries; + struct extcon_dev *edev; const struct rockchip_usb2phy_cfg *phy_cfg; struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS]; }; @@ -166,7 +271,7 @@ static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw) return ret; /* waitting for the clk become stable */ - mdelay(1); + udelay(1200); } return 0; @@ -263,33 +368,84 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy) return ret; } -static int rockchip_usb2phy_init(struct phy *phy) +static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy) { - struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); - struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); int ret; + struct device_node *node = rphy->dev->of_node; + struct extcon_dev *edev; + + if (of_property_read_bool(node, "extcon")) { + edev = extcon_get_edev_by_phandle(rphy->dev, 0); + if (IS_ERR(edev)) { + if (PTR_ERR(edev) != -EPROBE_DEFER) + dev_err(rphy->dev, "Invalid or missing extcon\n"); + return PTR_ERR(edev); + } + } else { + /* Initialize extcon device */ + edev = devm_extcon_dev_allocate(rphy->dev, + rockchip_usb2phy_extcon_cable); - if (rport->port_id == USB2PHY_PORT_HOST) { - /* clear linestate and enable linestate detect irq */ - mutex_lock(&rport->mutex); + if (IS_ERR(edev)) + return -ENOMEM; - ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + ret = devm_extcon_dev_register(rphy->dev, edev); if (ret) { - mutex_unlock(&rport->mutex); + dev_err(rphy->dev, "failed to register extcon device\n"); return ret; } + } - ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true); - if (ret) { - mutex_unlock(&rport->mutex); - return ret; + rphy->edev = edev; + + return 0; +} + +static int rockchip_usb2phy_init(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret = 0; + + mutex_lock(&rport->mutex); + + if (rport->port_id == USB2PHY_PORT_OTG) { + if (rport->mode != USB_DR_MODE_HOST) { + /* clear bvalid status and enable bvalid detect irq */ + ret = property_enable(rphy, + &rport->port_cfg->bvalid_det_clr, + true); + if (ret) + goto out; + + ret = property_enable(rphy, + &rport->port_cfg->bvalid_det_en, + true); + if (ret) + goto out; + + schedule_delayed_work(&rport->otg_sm_work, + OTG_SCHEDULE_DELAY); + } else { + /* If OTG works in host only mode, do nothing. */ + dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode); } + } else if (rport->port_id == USB2PHY_PORT_HOST) { + /* clear linestate and enable linestate detect irq */ + ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + if (ret) + goto out; + + ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true); + if (ret) + goto out; - mutex_unlock(&rport->mutex); schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); } - return 0; +out: + mutex_unlock(&rport->mutex); + return ret; } static int rockchip_usb2phy_power_on(struct phy *phy) @@ -340,7 +496,19 @@ static int rockchip_usb2phy_exit(struct phy *phy) { struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); - if (rport->port_id == USB2PHY_PORT_HOST) + if (rport->port_id == USB2PHY_PORT_OTG && + rport->mode != USB_DR_MODE_HOST) + /* + * Don't cancel otg_sm_work when phy exit, because + * the otg_sm_work is a OTG state machine delay work, + * it will hold a wake lock if SDP cable or CDP cable + * is attached, and release the wake lock if cable + * dettached. If usb controller(e.g. DWC3) call phy exit + * when USB cable is dettached and cancel otg_sm_work, + * it may cause the usb phy keeping hold of wake lock + */ + cancel_delayed_work_sync(&rport->chg_work); + else if (rport->port_id == USB2PHY_PORT_HOST) cancel_delayed_work_sync(&rport->sm_work); return 0; @@ -354,6 +522,252 @@ static const struct phy_ops rockchip_usb2phy_ops = { .owner = THIS_MODULE, }; +static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, + otg_sm_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + static unsigned int cable; + unsigned long delay; + bool vbus_attach, sch_work, notify_charger; + + if (rport->utmi_avalid) + vbus_attach = + property_enabled(rphy, &rport->port_cfg->utmi_avalid); + else + vbus_attach = + property_enabled(rphy, &rport->port_cfg->utmi_bvalid); + + sch_work = false; + notify_charger = false; + delay = OTG_SCHEDULE_DELAY; + dev_dbg(&rport->phy->dev, "%s otg sm work\n", + usb_otg_state_string(rport->state)); + + switch (rport->state) { + case OTG_STATE_UNDEFINED: + rport->state = OTG_STATE_B_IDLE; + if (!vbus_attach) + rockchip_usb2phy_power_off(rport->phy); + /* fall through */ + case OTG_STATE_B_IDLE: + if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) { + dev_dbg(&rport->phy->dev, "usb otg host connect\n"); + rport->state = OTG_STATE_A_HOST; + rockchip_usb2phy_power_on(rport->phy); + return; + } else if (vbus_attach) { + dev_dbg(&rport->phy->dev, "vbus_attach\n"); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + schedule_delayed_work(&rport->chg_work, 0); + return; + case USB_CHG_STATE_DETECTED: + switch (rphy->chg_type) { + case POWER_SUPPLY_TYPE_USB: + dev_dbg(&rport->phy->dev, + "sdp cable is connecetd\n"); + wake_lock(&rport->wakelock); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_SDP; + break; + case POWER_SUPPLY_TYPE_USB_DCP: + dev_dbg(&rport->phy->dev, + "dcp cable is connecetd\n"); + rockchip_usb2phy_power_off(rport->phy); + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_DCP; + break; + case POWER_SUPPLY_TYPE_USB_CDP: + dev_dbg(&rport->phy->dev, + "cdp cable is connecetd\n"); + wake_lock(&rport->wakelock); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_CDP; + break; + default: + break; + } + break; + default: + break; + } + } else { + notify_charger = true; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + } + + if (rport->vbus_attached != vbus_attach) { + rport->vbus_attached = vbus_attach; + + if (notify_charger && rphy->edev) + extcon_set_cable_state_(rphy->edev, + cable, vbus_attach); + } + break; + case OTG_STATE_B_PERIPHERAL: + if (!vbus_attach) { + dev_dbg(&rport->phy->dev, "usb disconnect\n"); + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + rport->state = OTG_STATE_B_IDLE; + delay = 0; + rockchip_usb2phy_power_off(rport->phy); + wake_unlock(&rport->wakelock); + } + sch_work = true; + break; + case OTG_STATE_A_HOST: + if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) { + dev_dbg(&rport->phy->dev, "usb otg host disconnect\n"); + rport->state = OTG_STATE_B_IDLE; + rockchip_usb2phy_power_off(rport->phy); + } + break; + default: + break; + } + + if (sch_work) + schedule_delayed_work(&rport->otg_sm_work, delay); +} + +static const char *chg_to_string(enum power_supply_type chg_type) +{ + switch (chg_type) { + case POWER_SUPPLY_TYPE_USB: + return "USB_SDP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_DCP: + return "USB_DCP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_CDP: + return "USB_CDP_CHARGER"; + default: + return "INVALID_CHARGER"; + } +} + +static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idp_src_en, en); +} + +static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.vdp_src_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idm_sink_en, en); +} + +static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.vdm_src_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idp_sink_en, en); +} + +#define CHG_DCD_POLL_TIME (100 * HZ / 1000) +#define CHG_DCD_MAX_RETRIES 6 +#define CHG_PRIMARY_DET_TIME (40 * HZ / 1000) +#define CHG_SECONDARY_DET_TIME (40 * HZ / 1000) +static void rockchip_chg_detect_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, chg_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + bool is_dcd, tmout, vout; + unsigned long delay; + + dev_dbg(&rport->phy->dev, "chg detection work state = %d\n", + rphy->chg_state); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + if (!rport->suspended) + rockchip_usb2phy_power_off(rport->phy); + /* put the controller in non-driving mode */ + property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, false); + /* Start DCD processing stage 1 */ + rockchip_chg_enable_dcd(rphy, true); + rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; + rphy->dcd_retries = 0; + delay = CHG_DCD_POLL_TIME; + break; + case USB_CHG_STATE_WAIT_FOR_DCD: + /* get data contact detection status */ + is_dcd = property_enabled(rphy, &rphy->phy_cfg->chg_det.dp_det); + tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES; + /* stage 2 */ + if (is_dcd || tmout) { + /* stage 4 */ + /* Turn off DCD circuitry */ + rockchip_chg_enable_dcd(rphy, false); + /* Voltage Source on DP, Probe on DM */ + rockchip_chg_enable_primary_det(rphy, true); + delay = CHG_PRIMARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_DCD_DONE; + } else { + /* stage 3 */ + delay = CHG_DCD_POLL_TIME; + } + break; + case USB_CHG_STATE_DCD_DONE: + vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.cp_det); + rockchip_chg_enable_primary_det(rphy, false); + if (vout) { + /* Voltage Source on DM, Probe on DP */ + rockchip_chg_enable_secondary_det(rphy, true); + delay = CHG_SECONDARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE; + } else { + if (tmout) { + /* floating charger found */ + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } else { + rphy->chg_type = POWER_SUPPLY_TYPE_USB; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } + } + break; + case USB_CHG_STATE_PRIMARY_DONE: + vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.dcp_det); + /* Turn off voltage source */ + rockchip_chg_enable_secondary_det(rphy, false); + if (vout) + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + else + rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP; + /* fall through */ + case USB_CHG_STATE_SECONDARY_DONE: + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + /* fall through */ + case USB_CHG_STATE_DETECTED: + /* put the controller in normal mode */ + property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, true); + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + dev_info(&rport->phy->dev, "charger = %s\n", + chg_to_string(rphy->chg_type)); + return; + default: + return; + } + + schedule_delayed_work(&rport->chg_work, delay); +} + /* * The function manage host-phy port state and suspend/resume phy port * to save power. @@ -485,6 +899,26 @@ static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data) return IRQ_HANDLED; } +static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (!property_enabled(rphy, &rport->port_cfg->bvalid_det_st)) + return IRQ_NONE; + + mutex_lock(&rport->mutex); + + /* clear bvalid detect irq pending status */ + property_enable(rphy, &rport->port_cfg->bvalid_det_clr, true); + + mutex_unlock(&rport->mutex); + + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + + return IRQ_HANDLED; +} + static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, struct rockchip_usb2phy_port *rport, struct device_node *child_np) @@ -509,13 +943,87 @@ static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, IRQF_ONESHOT, "rockchip_usb2phy", rport); if (ret) { - dev_err(rphy->dev, "failed to request irq handle\n"); + dev_err(rphy->dev, "failed to request linestate irq handle\n"); return ret; } return 0; } +static int rockchip_otg_event(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct rockchip_usb2phy_port *rport = + container_of(nb, struct rockchip_usb2phy_port, event_nb); + + schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY); + + return NOTIFY_DONE; +} + +static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, + struct rockchip_usb2phy_port *rport, + struct device_node *child_np) +{ + int ret; + + rport->port_id = USB2PHY_PORT_OTG; + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; + rport->state = OTG_STATE_UNDEFINED; + + /* + * set suspended flag to true, but actually don't + * put phy in suspend mode, it aims to enable usb + * phy and clock in power_on() called by usb controller + * driver during probe. + */ + rport->suspended = true; + rport->vbus_attached = false; + + mutex_init(&rport->mutex); + + rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1); + if (rport->mode == USB_DR_MODE_HOST) { + ret = 0; + goto out; + } + + wake_lock_init(&rport->wakelock, WAKE_LOCK_SUSPEND, "rockchip_otg"); + INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work); + INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work); + + rport->utmi_avalid = + of_property_read_bool(child_np, "rockchip,utmi-avalid"); + + rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid"); + if (rport->bvalid_irq < 0) { + dev_err(rphy->dev, "no vbus valid irq provided\n"); + ret = rport->bvalid_irq; + goto out; + } + + ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL, + rockchip_usb2phy_bvalid_irq, + IRQF_ONESHOT, + "rockchip_usb2phy_bvalid", rport); + if (ret) { + dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n"); + goto out; + } + + if (!IS_ERR(rphy->edev)) { + rport->event_nb.notifier_call = rockchip_otg_event; + + ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST, + &rport->event_nb); + if (ret) + dev_err(rphy->dev, "register USB HOST notifier failed\n"); + } + +out: + return ret; +} + static int rockchip_usb2phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -553,8 +1061,14 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) rphy->dev = dev; phy_cfgs = match->data; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; platform_set_drvdata(pdev, rphy); + ret = rockchip_usb2phy_extcon_register(rphy); + if (ret) + return ret; + /* find out a proper config which can be matched with dt. */ index = 0; while (phy_cfgs[index].reg) { @@ -591,13 +1105,9 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) struct rockchip_usb2phy_port *rport = &rphy->ports[index]; struct phy *phy; - /* - * This driver aim to support both otg-port and host-port, - * but unfortunately, the otg part is not ready in current, - * so this comments and below codes are interim, which should - * be changed after otg-port is supplied soon. - */ - if (of_node_cmp(child_np->name, "host-port")) + /* This driver aims to support both otg-port and host-port */ + if (of_node_cmp(child_np->name, "host-port") && + of_node_cmp(child_np->name, "otg-port")) goto next_child; phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops); @@ -610,9 +1120,18 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) rport->phy = phy; phy_set_drvdata(rport->phy, rport); - ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np); - if (ret) - goto put_child; + /* initialize otg/host port separately */ + if (!of_node_cmp(child_np->name, "host-port")) { + ret = rockchip_usb2phy_host_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } else { + ret = rockchip_usb2phy_otg_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } next_child: /* to prevent out of boundary */ @@ -654,10 +1173,18 @@ static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = { static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { { - .reg = 0xe450, + .reg = 0xe450, .num_ports = 2, .clkout_ctl = { 0xe450, 4, 4, 1, 0 }, .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe454, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 }, + .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 }, + }, [USB2PHY_PORT_HOST] = { .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, @@ -667,12 +1194,32 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } } }, + .chg_det = { + .opmode = { 0xe454, 3, 0, 5, 1 }, + .cp_det = { 0xe2ac, 2, 2, 0, 1 }, + .dcp_det = { 0xe2ac, 1, 1, 0, 1 }, + .dp_det = { 0xe2ac, 0, 0, 0, 1 }, + .idm_sink_en = { 0xe450, 8, 8, 0, 1 }, + .idp_sink_en = { 0xe450, 7, 7, 0, 1 }, + .idp_src_en = { 0xe450, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 }, + .vdm_src_en = { 0xe450, 12, 12, 0, 1 }, + .vdp_src_en = { 0xe450, 11, 11, 0, 1 }, + }, }, { - .reg = 0xe460, + .reg = 0xe460, .num_ports = 2, .clkout_ctl = { 0xe460, 4, 4, 1, 0 }, .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe464, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 }, + .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 }, + }, [USB2PHY_PORT_HOST] = { .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, -- 2.0.0