Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753425AbcKCJem (ORCPT ); Thu, 3 Nov 2016 05:34:42 -0400 Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:54585 "EHLO metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752194AbcKCJel (ORCPT ); Thu, 3 Nov 2016 05:34:41 -0400 Message-ID: <1478165672.3650.3.camel@pengutronix.de> Subject: Re: [PATCH v2 04/10] pwm: imx: Move PWMv2 software reset code to a separate function From: Philipp Zabel To: Lukasz Majewski Cc: Thierry Reding , Stefan Agner , Boris Brezillon , linux-pwm@vger.kernel.org, Bhuvanchandra DV , linux-kernel@vger.kernel.org, kernel@pengutronix.de, Fabio Estevam , Fabio Estevam , Lothar Wassmann Date: Thu, 03 Nov 2016 10:34:32 +0100 In-Reply-To: <1477549785-4972-5-git-send-email-l.majewski@majess.pl> References: <1477549785-4972-1-git-send-email-l.majewski@majess.pl> <1477549785-4972-5-git-send-email-l.majewski@majess.pl> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.12.9-1+b1 Mime-Version: 1.0 Content-Transfer-Encoding: 7bit X-SA-Exim-Connect-IP: 2001:67c:670:100:96de:80ff:fec2:9969 X-SA-Exim-Mail-From: p.zabel@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2532 Lines: 85 Hi Lukasz, Am Donnerstag, den 27.10.2016, 08:29 +0200 schrieb Lukasz Majewski: > The software reset code has been extracted from imx_pwm_config_v2 function > and moved to new one - imx_pwm_sw_reset(). > > This change reduces the overall size of imx_pwm_config_v2() and prepares > it for atomic PWM operation. > > Suggested-by: Stefan Agner > Suggested-by: Boris Brezillon > Signed-off-by: Lukasz Majewski Acked-by: Philipp Zabel > --- > Changes for v2: > - Add missing parenthesis > --- > drivers/pwm/pwm-imx.c | 31 +++++++++++++++++++++---------- > 1 file changed, 21 insertions(+), 10 deletions(-) > > diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c > index 822eb5a..8174ae6 100644 > --- a/drivers/pwm/pwm-imx.c > +++ b/drivers/pwm/pwm-imx.c > @@ -134,6 +134,25 @@ static void imx_pwm_disable_v1(struct pwm_chip *chip, struct pwm_device *pwm) > clk_disable_unprepare(imx->clk_per); > } > > +static void imx_pwm_sw_reset(struct pwm_chip *chip) > +{ > + struct imx_chip *imx = to_imx_chip(chip); > + struct device *dev = chip->dev; > + int wait_count = 0; > + u32 cr; > + > + writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR); > + do { > + usleep_range(200, 1000); > + cr = readl(imx->mmio_base + MX3_PWMCR); > + } while ((cr & MX3_PWMCR_SWR) && > + (wait_count++ < MX3_PWM_SWR_LOOP)); Not an issue for this patch, but this could be converted to use readl_poll_timeout. > + > + if (cr & MX3_PWMCR_SWR) > + dev_warn(dev, "software reset timeout\n"); > +} > + > + > static int imx_pwm_config_v2(struct pwm_chip *chip, > struct pwm_device *pwm, int duty_ns, int period_ns) > { > @@ -143,7 +162,7 @@ static int imx_pwm_config_v2(struct pwm_chip *chip, > unsigned long period_cycles, duty_cycles, prescale; > unsigned int period_ms; > bool enable = pwm_is_enabled(pwm); > - int wait_count = 0, fifoav; > + int fifoav; > u32 cr, sr; > > /* > @@ -166,15 +185,7 @@ static int imx_pwm_config_v2(struct pwm_chip *chip, > dev_warn(dev, "there is no free FIFO slot\n"); > } > } else { > - writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR); > - do { > - usleep_range(200, 1000); > - cr = readl(imx->mmio_base + MX3_PWMCR); > - } while ((cr & MX3_PWMCR_SWR) && > - (wait_count++ < MX3_PWM_SWR_LOOP)); > - > - if (cr & MX3_PWMCR_SWR) > - dev_warn(dev, "software reset timeout\n"); > + imx_pwm_sw_reset(chip); > } > > c = clk_get_rate(imx->clk_per); regards Philipp